Jump to content
SAU Community

Recommended Posts

Compiling all the parts I have for sale, both spares and abandoned projects. Located in Sydney, can contact me at : cbaloglow (@) netspace.net.au.

Misc RB26 parts (cam covers, water/oil lines, sumps etc) - PM/email me what you need

Twin high mount exhaust manifolds

Single wastegate with cross over pipe between manifolds. Brand new

$1100

HKS pod filters - $50 each w/adapters

950cc injectors

Low impedance. Have 14 available

$150 each

RB26 gearbox

Both push + pull available, with or without shifter, transfer case etc.

$1200

Cusco 1/1.5 way front LSD

Suit RB26 sump. Used, good condition.

$800

Recaro Raptor interior

Complete set of front seats, rear seat and rails to bolt directly in to an R33. Seats are Recaro Raptor (have air pumps for lumbar support), rear was retrimmed by Recaro in the same material. No stains, tears or marks.

$2800

SR20 exhaust manifolds

Have two, one is one piece stainless runners, the other custom + ceramic coatered. Both place the turbo in the standard spot - internal wastegated.

$350 each

HKS 2530 - SR

Turbo has done less than 200kms. Zero carbon in exhaust housing, no shaft play etc. Can sell with an exhaust manifold + dump pipe

$1700 turbo only

HKS 2835R - internal gate T25 flange

Used, bolt on for SR20

$1500

AP 6 spot calipers

Can machine adapter to suit Skyline.

$2000

HKS 4-way Circuit suspension

Top of the line, remote reservoirs. Fully adjustable - used. Will fit both R33 + R34 GT-R.

$1200

Q45 AFM - $250

HKS DLI

Type I, new in box.

$750

Trust intercooler

Brand new, twin inlet. 600x300x76mm.

$1500

Trust 4 layer intercooler

Used, 600x135x300. Twin inlets, single 100mm outlet

$2000

HKS 280 degree cams + HKS buckets

Used, sell as a set. 10.8mm lift on both in/ex.

$1200

RB26 ARP head stud kit, new- $600

HKS ETC + EDA - R33, used $800

DBA 4000 series GTS-t rear rotors

Brand new in box, part numbers 4908SR and 4908SL.

$400

Adjustable upper arms - rear- R33/34 - $300

Solid rear cradle mounts - $100

HKS 3040 turbo kit RB25

Selling the turbo kit off my GTS-t. Custom ceramic coated low mount manifold, HKS 3040 turbo, exhaust to cat, AFM pipe. Turbo made 294rwkw @ 17psi, no wastegate.

$2,000

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Compiling all the parts I have for sale, both spares and abandoned projects. Located in Sydney, can contact me at : cbaloglow (@) netspace.net.au.

Misc RB26 parts (cam covers, water/oil lines, sumps etc) - PM/email me what you need

Twin high mount exhaust manifolds

Single wastegate with cross over pipe between manifolds. Brand new

$1100

Z32 AFMS

$250 each, or $300 each with HKS pod filters + adapters. Have quite a few of the HKS filters - $50 each w/adapters.

C's short shifter

Brand new in box. RB series.

$400

950cc injectors

Low impedance. Have 14 available

$150 each

RB26 gearbox

Both push + pull available, with or without shifter, transfer case etc.

$1200

Cusco 1/1.5 way front LSD

Suit RB26 sump. Used, good condition.

$800

Recaro Raptor interior

Complete set of front seats, rear seat and rails to bolt directly in to an R33. Seats are Recaro Raptor (have air pumps for lumbar support), rear was retrimmed by Recaro in the same material. No stains, tears or marks.

$2800

Trust TD06 kit

Turbo has been reconditioned with a new, larger Garrett compressor wheel and .7 A/R housing, have a choice of 6/8/10cm rear housings. Kit has turbo, manifold and wastegate.

$2700

SR20 exhaust manifolds

Have two, one is one piece stainless runners, the other custom + ceramic coatered. Both place the turbo in the standard spot - internal wastegated.

$350 each

HKS 2530 - SR

Turbo has done less than 200kms. Zero carbon in exhaust housing, no shaft play etc. Can sell with an exhaust manifold + dump pipe

$1700 turbo only

HKS 2835R - internal gate T25 flange

Used, bolt on for SR20

$1500

HKS RB26 low-mount manifolds

Standard tubular replacement manifolds. One piece runners, exceptional welds and construction. Brand new in box.

$1500

AP 6 spot calipers

Can machine adapter to suit Skyline.

$2000

BCNR33 HKS Drag suspension

New in box, fully adjustable with valve rates to suit drag racing

$1500

HKS 4-way Circuit suspension

Top of the line, remote reservoirs. Fully adjustable - used. Will fit both R33 + R34 GT-R.

$1200

Q45 AFM - $250

HKS DLI

Type I, new in box.

$750

Trust intercooler

Brand new, twin inlet. 600x300x76mm.

$1500

Trust 4 layer intercooler

Used, 600x135x300. Twin inlets, single 100mm outlet

$2000

East Bear S2 carbon bonnet - two side vents and the large vent above radiator - http://www.e-aero.jp/aeroparts/skyline/r-33/c-bon.html $1400

East Bear flat carbon bootlid - http://www.e-aero.jp/aeroparts/skyline/r-3...33/c-trank.html $900

East Bear S2 fibreglass front bar/spoiler. Clear indicators, plain style (not the one that has vents on the side) http://www.e-aero.jp/aeroparts/skyline/r-3...-33/f-bump.html $900

S2 headlight assemblies - $650

ABS plastic center grill - http://www.e-aero.jp/aeroparts/skyline/r-3...33/f-grill.html $250

Ganador mirrors R33 2 door- $450

Would prefer to work out a deal on selling the whole lot as a kit.

HKS 280 degree cams + HKS buckets

Used, sell as a set. 10.8mm lift on both in/ex.

$1200

RB26 ARP head stud kit, new- $600

HKS ETC + EDA - R33, used $800

Nismo dash

White faced, 320km/h speedo. Suit R33, used.

$650

OS Giken twin plate clutch

Used, suit push type clutch.  

$1,000

hI I WILL TAKE THE FLAT CARBON BOOLTLID IF YOU WILL SEND TO ADELAIDE FOR ME AND i WILL GIVE YOU $900 CALL ME 0415128693 ASK FOR PETE

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/#findComment-1327782
Share on other sites

HKS 3040 turbo kit RB25

Selling the turbo kit off my GTS-t. Custom ceramic coated low mount manifold, HKS 3040 turbo, exhaust to cat, AFM pipe. Turbo made 294rwkw @ 17psi, no wastegate.

$2,000

RB25 R33 GTS-t Power FC w/Hand controller

Tuned for the above turbo kit

$900

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/#findComment-1328493
Share on other sites

well are you gonna get back to ppl dude i want to buy something from you and you dont want to reply.why did yoyu go on this site to advertise?????? :headspin:

Relax mate. He is a busy man. He continually has good stuff and looks after the SAU guys. Just be patient. I think it is a bit rich you coming on here in Apr '05 and give him a spray without knowing his trader history etc... plus 8 of your 11 posts are related to trading on SAU... Sounds like getting on this site to advertise to me...

DoughBoy; I'll take one of each! free bump! :)

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/#findComment-1335566
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...