Jump to content
SAU Community

Recommended Posts

okay, so i've taken my car back for some warranty repairs.....so i'm now without a car for the next few days (hopefully get it back before the weekend)

until then i'm being chauffered around in my gf's little Accent (yes, HYUNDAI! I can't escape!)

Just to let you know, i found the following faults.

1. Bubbling noise about 4500rpm while on boost. (skyzer knows what I'm talking about)

2. Gearbox Synchro's between 4th and 5th mash, and there's a drivetrain vibration in 5th gear (gts-t vspec has the same sorta thing)

3. The Brakes are squeaky as shit, and are crap. (they look like new pads, probably misaligned)

4. HICAS reports speed sensor error (thus the RSM doesnt work!)

and last but not least OIL out the Blitz BOV....

So the guy I dropped it into said for all the electrical stuff, bubbling noise etc.. it'll goto BARRIES DYNO! (apparently he fixes everyone's f*ck-ups)

so this should be VERY interesting. I'll let you know how it goes.

-K.

Link to comment
https://www.sau.com.au/forums/topic/7213-i-got-no-car-sniff/
Share on other sites

welcome to the world of skylines and modifications... i won't bother telling you how many times my car has been off the road due to mods or repairs... my mags are once again my hassle at the moment.... my car might be off the road for a week :-( I should be used to it by now though... My skyline hasn't been faulty or nothing just time consuming waiting for parts and installatin times on things.......

Link to comment
https://www.sau.com.au/forums/topic/7213-i-got-no-car-sniff/#findComment-106180
Share on other sites

I must say you guys with turbos polly beat the shit out of my NA but man! how much $$$$ you guys spending on it!

I never had major problems with my car ... NOT AT ALL, not even oil leak. my garage is clean as...

dang... I guess RB25DE is good as long as put turbo on it! :lol:

but hey I wish I has Turbo some times... I pretend making blow off sound in my car phhhhheeeewww... :P

cheers

Joe

Link to comment
https://www.sau.com.au/forums/topic/7213-i-got-no-car-sniff/#findComment-106198
Share on other sites

Strich9ine,

I saw your car yesterday, it should be going to Barries today, but he tends to be so slow that I'd be surprised if you have it by the weekend. He is very good but tends to take his time. I checked out your RSM, it was set differently to mine, who did it for you? Mine works fine so I don't see why yours had different settings in it.

Look's like you'll be cruising in the Accent this weekend, you should take it to the drags tommorrow night.

See'ya :burnout:

Link to comment
https://www.sau.com.au/forums/topic/7213-i-got-no-car-sniff/#findComment-106199
Share on other sites

OIL out the BOV is bad.. that means oil is getting out of the engine.. busted turbo or the rings are gone and the oil is entering the intake track.

had this happen to my TX3.. ring lands were foobarred.

but its under warranty, so its all good.

Shaun

Link to comment
https://www.sau.com.au/forums/topic/7213-i-got-no-car-sniff/#findComment-106246
Share on other sites

You don't have to pay anything - just make them fix it. I don't think a compression test would cost too much - but look on the bright side - if it is the rings get the mech to replace the pistons with forgies and get them to pay (most) of the labour - even better if the ringlands are shot and they will be paying part cost of the forgies and all the labour! mmmm forgies:) Then at the same time get the rods shot peened, and the crank balanced. Ah, its nice to dream eh?

Link to comment
https://www.sau.com.au/forums/topic/7213-i-got-no-car-sniff/#findComment-106302
Share on other sites

No you dont have to take the head off, just pull the plugs. I have seen two types of compression guage, one that has to be held in place by hand and one that screws into the cylinder. the guage has a one way valve, so the reading stays there until you reset it (mind you this was a few years back, probably have flash electronic ones nowadays). As for compression, from memory there is a range - eg from 160-180psi - that is considered healthy (different for different cars), and if it goes outside you have trouble. Quite usually one cylinder goes first the back ones for some reason.

I'm not sure what the compression on skylines is supposed to be, the figures I used were for example only. As I mentioned, this info is from my youth when I played with alot of holdens and fords - shock horror.

If anything I have said is wrong appologies, and please correct me.

Link to comment
https://www.sau.com.au/forums/topic/7213-i-got-no-car-sniff/#findComment-106335
Share on other sites

Steve,

Thanks for clearing that up, I've never had it done, but I suppose with my forged pistons going in they will do it after that. I think the reason the back pistons go first, at least on GTS-t's is due to the exhasut manifold design. Apparently the number 6 cylinder has alot more heat due to the relatively poor design of the manifold. It also tend to run slightly leaner than the others, further adding to the heat. The heat will cause fractures to appear and therefore the compression on that piston will be lost.

Anyway, thats what I was told.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7213-i-got-no-car-sniff/#findComment-106342
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...