Jump to content
SAU Community

Recommended Posts

Hi,

I'm stuck in 3rd gear, been stuck for a while. I think the thrust bearing was on it's way out before getting stuck (it was whirring/clunking with the clutch pedal up, then when you'd press down on it you could hear it wind down for a few then stop making the noise).

Question is - if I replace the thrust bearing, along with a clutch plate and pressure plate with a machined flywheel. Will the gearbox then come out of gear? Or will I have to put a new box in as well?

The reason I ask is because if I run the car and put my foot off the clutch pedal it will try to roll forward then stall (basically, the clutch seems to pickup still).

When trying to pull it out of 3rd it will only go down a little bit but not entirely out of 3rd, if I try to put the clutch pedal up in this half way out stage grinding can be heard from the gearbox.

I've got a gearbox and clutch ready to go in, I just want to avoid putting the gearbox in for now (as I don't know it's condition) and wondering if the clutch kit itself will help.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/
Share on other sites

when you pull the gearbox out to do the clutch, see if it will come loose then. Have you tried taking all the weight off the g/box to see if it will come free? Any sort of incline will put weight on the box, and want to stop it from releasing.

Cheers

Sumo

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1330158
Share on other sites

Sounds like your clutch is dragging, have you bled the hydraulics to make sure you haven't got air in the system?

As steveL has said, if you can get the car out of gear when it's switched off then it'd point to the clutch not fully disengaging rather than the box being stuck. Even with the clutch dragging you should still be able to pull it out of gear when the engine is running.

If you're really lucky you have a dragging clutch and a rooted box :( Swap them both.

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1330285
Share on other sites

I can't get it out if it's off. The car is quite literally stuck in 3rd. I've tried jiggling it, heaving it, pleading to it and bashing it.

Sumo how would I get the weight off it? I've tried pulling it out on the hill it stopped, in my driveway, on the lawn, halfway down the street, on the street etc etc all different inclines. I've even 'bumped' the gearstick to shake the box on it's mounts left to right hoping it might get it unstuck.

Dave I haven't bled the hydraulics. Sounds stupid but I don't know how, I might look in the s13 workshop manual tonight and see if I can give it a go without putting more fluid in (that stuff is damn expensive). I don't think this is it however as the box had been locked out of 3rd and 4th for about a week before this happened so I think something i s wrong with the box.

Wow Dave so by the sounds of it I'm really lucky? :(

Shit yeah!

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1330428
Share on other sites

I can't get it out if it's off. The car is quite literally stuck in 3rd. I've tried jiggling it, heaving it, pleading to it and bashing it.

I'm afraid this is a gearbox out situation - somethings broken or bent. Since you have another gb and clutch don't waste anymore time on the one in the car just change it over.

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1330474
Share on other sites

i would say you have most likely broken a selector. that is why you can't get it out of third. possible just bent a selector but i'm guessing it's cracked. in fact I'd almost put money on it.

i have a question. have you ever had any fun out of this car? it's been a pretty awful sounding 6 months so far.

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1330494
Share on other sites

Yeah I had some fun mmmgtir. I picked up my (now) girlfriend in it one day, I was going for a cruise and I saw her at the bus stop and picked her up.

It broke down on the way to getting wherever we were going and it was about that time I figured out she was a decent girl when talking to her on the side of the road.... she's been my gf since :rolleyes:

Also I pulled a burnout in it once.

Other than that.. no... oh wait.. the engine fire was fun, uhm.. finding out I had no screws holding my engine in that was pretty funny.. heh no seriously I did laugh.

And uhm.. yea what else :)

I should have bought your GTiR.

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1330613
Share on other sites

mate, as long as you've had some fun in it, it's should be worthwhile. it should be a good car once it's eventually sorted.

I am actually looking to buy a silvia or 180 or maybe even a 31 sky as a race car. I want to keep the GTR predominately a road car.

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1330630
Share on other sites

yeah, but I personally think that an SR20 is the gun engine to have. hmmm maybe you should sell me yours....

I like that silvias are cheap, I can buy an SR turbo manual for under $9K or buy a SR non-turbo man or auto for under $5K. then I will strip it out, do all the suspension and brakes (and if needed slot in a SR turbo) and bobs your mothers brother I have a cheap race car that will probably be as quick around a track as my GTR (if not quicker) and be a lot cheaper to blow up/crash...

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1330991
Share on other sites

Yeah the sr is a gun engine.

And yeah silvias are cheap. Stripped out there's not a lot that can beat them like that to thrap, they have lots of ready parts and yeah it's all good.

Hmm I've been considering selling my car, but I've just finished fixing it after this!!!

Hmm still got your GTiR?

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1331986
Share on other sites

DON'T drive it!! When you get it out, have a quick look inside. Should be easy to see what's bent or broken. You have'nt lent it to any of your mates lalely, have you?.. Any of your mates [or girlfriends] sort of fairly hairy, with longish arms?? Sounds like only a bloody Gorilla could do that much damage, changing gear.

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1333662
Share on other sites

I've had a problem of my previous car not coming out of second gear before. It would literally not come out of gear, no matter what I did. It turned out to be the master/slave cylinders packing it in. Hopefully it's an easy fix for you :(

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1333948
Share on other sites

Yeah the sr is a gun engine.

And yeah silvias are cheap. Stripped out there's not a lot that can beat them like that to thrap, they have lots of ready parts and yeah it's all good.

Hmm I've been considering selling my car, but I've just finished fixing it after this!!!

Hmm still got your GTiR?

hmmm, i'd say don't sell it. after all this it's bound to be ok. if you do though give me a shout.

GTI-R is gone mate :cheers: i miss it too. such a nice little car :cheers:

i'm still thinking selector.

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1334518
Share on other sites

yeah man i'd have to say ive nuked two SR gearbox's in the two 180's that ive owned. apparently they have a semi weak imput shaft and from what i can tell they don't like quick button off from wheel spin.

My first box i twisted the output shaft and stripped third and second. My 180 at the moment i shattered the input shaft and the main cluster. I guess the moral to this story is that maybe i should be so abusive. BUt sounds like a clutch problem to me. Had a five puck weld to the flywheel. couldn't get it out of gear then.

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1335853
Share on other sites

i have a similar problem except it hasnt gotten fully stuck in gears yet...

Im havin trouble getting it into gears when the car is stopped.... the gearstick just wont go into forst or any other gear... and i have to use excessive force...

It's also been stuck in gear a few times... like i put the car in neutral but it still stays in that gear... ???

Any ideas ? as its gettin more and more difficult to get into gear!

Thanks

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1337948
Share on other sites

i have a similar problem except it hasnt gotten fully stuck in gears yet...  

Im havin trouble getting it into gears when the car is stopped.... the gearstick just wont go into forst or any other gear... and i have to use excessive force...  

It's also been stuck in gear a few times... like i put the car in neutral but it still stays in that gear... ???  

Any ideas ? as its gettin more and more difficult to get into gear!

Thanks

Mine doesn't like going into first either!

I just (whilst stuck at lights ) try to go in first rarely goes in so i proceed straight to forth (clunk sound )then go in first goes in str8 away.

Also as pushin up to first ,firmly till won't go in any more .give it a rev.

As for putting in neutral and it still in gear"start puttin $100 bucks aweek away......you will be needing it!!!

:Bang:

Link to comment
https://www.sau.com.au/forums/topic/72267-stuck-in-gear/#findComment-1338081
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...