Jump to content
SAU Community

Recommended Posts

also guys, im gettin killed out there vs my gf's brothers my02 rex :|

what am i going to need to put him in his place? hes got exhaust and upped boost.. 12psi?

will exhaust and fmic and 12psi do the trick? or will i need to get ecu change and injectors..

straight through 3"exhaust, FMIC & 12psi & make sure your pod is heat sheilded and has a cold air intake, you will get heaps more power! you don't need ecu & injectors for those, but start saving for an ecu for later on. dunno how it will go against the WRX, but if it was me id hang on to the skyline.

Full exhaust and you'll chop him dude!

The get a good boost controller to hold 12psi (elc holds better)...

I love s14 (series 2)s aswell, but atleast do your exhaust b4 u let the car go, r33s sound a HELL of alot nicer than an s14 does!!!

Power vs weight ratios, both cars will be similar with similar mods aswell, you wont loose anything with the skyline except the problem of the stock ECU not bein able to go past 12psi where as an s14 one can...

Hang onto the car until you've done the exhaust, you have to give it a chance, rb25s are awsome engines!

it's a lot of effort to sell then buy a new car.

i would suggest get straight thru exhaust at least and see how you feel. if you don't feel any gain, and are still unhappy then get something else.

personally, there is no way i would go from my R33 to the s14a. for a day to day car the skyline is soo much more comfortable, and ultimately is easy to get big power from :aroused: .

it will be a totally different car once you have added fmic and boost control, trust me :(.

also guys,  im gettin killed out there vs my gf's brothers my02 rex :|    

what am i going to need to put him in his place? hes got exhaust and upped boost.. 12psi?  

will exhaust and fmic and 12psi do the trick? or will i need to get ecu change and injectors..

The 02 rexy has 14 psi stock boost !!

Although 02 is the slowest of the late model rexes you need a fair bit of work to beat him . Stock 02 rexy and stock r33 the rexy will leave you for dead .

You will need a power f/c , front mount and more boost just to keep up with him .

Get a bigger turbo as well and then you will chop him for sure .

If he wants to beat you then he will have to spend a few $ on bigger turbo and ecu , then it will all come down to traction , dont forget he has 4wd .

5 speed rexes have a weak gearbox though ( they pop second gear ) .

So there you go and i speak from experience , i have owned a few rexes ( still have 02 sti ) and i have a couple gtrs as well , rexes are not a match for gtrs though .

It's also very hard to find a good s14a. Well, when I was looking that was the major determining factor in me buying my Skyline.

Insurance is also more expensive on s14 200sx's than on r33 gtst's. Well, it is here in Sydney anyway.

S14 should b cheaper then R33 cause it isn't a Import

yea i'm thinking the same way not sure to go Gts-t R33 bigger Clean car turbo i thinking about getting one

But i Love my Sr20's and am a die hard 4 fan but i Hate S14 look and am to poor for a S15 and i'm over my s13 :(

Looking at 180sx maybe

have my Heart Set on Dream car Gtr r32 but there just outa my price Range and the Gts-t have Rb20s in them not Rb25 :P

o the drama

I think i'll go with Gts-t R33 and save on the Side not modding it till i have Money for a GTR r32 :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...