Jump to content
SAU Community

Recommended Posts

Did anyone mension that they are also cheaper because aussie tax/duty is not include in that price(this is where most if not all of your saving comes from). if you get picked up at customs its about another 25% ontop of nenguns price.

Not to mension costs in retuns if the item shipped is the wrong part or faulty (not likly but possible) also there is sometimes a pretty long wait for parts (weeks to months). yes overseas is cheaper but it does have its risks

Where did you get 25% from ?

Import duty is 10% and then add another 10% gst , thats nowhere near 25 % .

Where did you get 25% from ?

Import duty is 10% and then add another 10% gst , thats nowhere near 25 % .

ok ill help you out.... if something costs you 10 oranges and you pay duty of 1 orange to get it in the country(10%) you have now paid 11 orange in total, then johnny howard wants a sum of oranges equal to 10%(gst) of your 11 oranges (1.1oranges)so in total you have now paid 12.1 oranges. 2.1 of those being in taxes making the total amount of taxes 2.1 oranges or 2.1/10 which gives you 21%.....pretty close to 25% (you wouldnt exactly describe 21 as being NOWHERE NEAR 25 would you)

ok ill help you out.... if something costs you 10 oranges and you pay duty of 1 orange to get it in the country(10%) you have now paid 11 orange in total, then johnny howard wants a sum of oranges equal to 10%(gst) of your 11 oranges (1.1oranges)so in total you have now paid 12.1 oranges. 2.1 of those being in taxes making the total amount of taxes 2.1 oranges or 2.1/10 which gives you 21%.....pretty close to 25% (you wouldnt exactly describe 21 as being NOWHERE NEAR 25 would you)

Yoou are correct in your example and i know that i have paid it often enough .

Now 21% is much closer to 20% than 25 % to me , i dont know about you or others .

If you knew how it works why didnt you say 21% in your earlier post ? Or just say 10% +10% on top . By you saying 25 % people think its still 15% duty + 10 gst which we all know is wrong .

so what are the chances of getting taxes? I contacted 'bigsully' and can get some in 1.5 weeks for a price cheaper than Nengun + potential taxes, but more than the current nengun price of $597

I did a bit of a ring around when i ordered my coils, airport dudes, customs and the general advice i got back was, that if the part is under $1000 you are under no obligation to declare it for tax purposes (like getting a present from overseas relitives).... and the same for anything over that, if it is not to be resold in oz (bussiness)....

I was happy with that so i get all my parts from there.... the main downside is the wait mine took 3 weeks but only casue i ordered them during the sold out period......

  • 1 month later...
I did a bit of a ring around when i ordered my coils, airport dudes, customs and the general advice i got back was, that if the part is under $1000 you are under no obligation to declare it for tax purposes (like getting a present from overseas relitives).... and the same for anything over that, if it is not to be resold in oz (bussiness)....

I was happy with that so i get all my parts from there.... the main downside is the wait mine took 3 weeks but only casue i ordered them during the sold out period......

You sure? We just ordered some X-Box stuff from Japan, was only $300 worth or so. We had no idea about import tax, then $100 bill rocked up in the mail. It was a very nasty surprise.

Including taxes???

They can't say a price delivered and then add on extra can they>>???

Why not?

It's quite simple - Nengun are in Japan, we are in Australia. They have no control over import duties and local taxes here, therefore how can they possibly quote a price including our local taxes when you purchase it from them in Japan.

Just for the record, I'm expecting a bill for GST/Duty on my coils now - apparantly they were pulled up in Customs according to the EMS tracking on my parcel. Hopefully they let them through without slapping me the bill, but I guess it's the risk you take when you purchase from overseas...

I just purchased a HKS GTSS turbo kit through greenline, I received a letter from the customs place at Granville saying I had to show how much I payed for what was in the box and also what was it exactly. I showed them my Greenline receipt, which was $3400 ($3150ish for turbos and $250ish for shipping). I was charged 10%GST on the turbo's and then on the shipping. SO added up to a $330 bill plus a $48 fee from customs. So total tax I paid was $380.. which isnt too bad for a turbo kit that i paid $3400 for and retails for $6000 in Australia :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
    • I used to do that (sills with rubber jack block).. ... then I got side skirts, and there's no way for the jack to actually work there, the jack pad itself on the jack is too big. Is the answer to use a... smaller (?) jack? Hmmm.
    • I have too much trauma from every skyline I've ever seen having crushed jack points/pinch welds lol.    Yep, works 100%, it's what I use when I'm using the quick jack. Don't know why I can't also bring myself to do the same thing when I'm using a jack. I blame the skyline PTSD. 
×
×
  • Create New...