Jump to content
SAU Community

Recommended Posts

Hi guys,

I am a fresher in this forum, just joined today. I was planning to upgrade and am half thinking about a R34 GTT tiptronic. Hence had few enquiries:

- Whats the stock performance specs 0-100, 1/4 etc etc.

- Approx how much it wd cost to make it a 11-12s car.

-How upgradable the turbo is to a bigger replacement, power gain, cost.

-Pros/Cons of tiptronic.

If you could please help. I tried the search feature, but still bit confused.

Brief inputs on any of the above wd be appreciated.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/
Share on other sites

Rough guess, 6.5 seconds and 14.2. Unofficial attempt at realistic figures.

Big $ difference between 11 and 12 seconds and a couple of different ways to get there.

Turbo is almost the same as R33 (same fitting anyway) so anything that fit that will fit R34. 100's of options at all different costs.

Tiptronic is easier in traffic, cheaper to upgrade (ie a shift kit costs less than an upgraded clutch 350-1000+) goes a little slower, can't use PowerFC for ECU upgrade.

Rather than a search, perhaps a few weeks browsing will sort you out for information. I read the forums for 3 months before I bought my car.

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1336466
Share on other sites

Maybe

12.9 seconds will require 200 rwkw AT LEAST.

To get an R34 GTT at 200rwkw you will need the following.

Front Mount $1000

Power FC $1200

Boost controller $500

Fitting and tuning of all $700

Pineapples fitted $200

Fuel Pump fitted $400

That's about $4000

.THEORETICALLY. That should net a 12 second pass.

More likely with sticky rubber.

Into the 11s...... You need about 270 rwkw.

For that you need a brand name turbo ($3000 fitted) or highflow ($2000 fitted)

Cams $1200 fitted.

Retune of computer $500

Slicks or Nittos $800

That another $4500 - $5500

Into the 10s? Forget ot before you budget another $10 - $15k.

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1336895
Share on other sites

Manual would get a flat 6 i would think.

I just bought a 34gtt tiptronic. I guess u also

have to allow for increased drivetrain loss for

auto. I don't know what power the auto can take

apparently high temp is killer so fit a good cooler.

Tiptronic pro's: auto mode - same as any auto

tiptronic mode - good for compression slow downs,

hill climbs, its a novelty(steering wheel shifts are a

bit of a wank imho)

Cons: slower than manual to up/down shift, for me

at least (after owning for 2 weeks only) more difficult

to control than manual - sure Ill get used to it.

Manual is better apart from traffic stop starts, but

for an extra $5-6k i couldn't justify it. Esp when conversion

can be done for approx $3k.

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1337869
Share on other sites

Thanks a lot everyone for all the inputs. Now I know more. Just planning ahead the finances I should prepare for. Looks like a big threshold credit cards required ;) . Money well spent for the R34 cause.

Also, I really just noticed the differemce between bodies of GTT and GTR (HOW could I not notice it before???)- the wide body of the GTR. THATS why they look sexier....

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1337980
Share on other sites

Zymotic - It already has a good cooler for the transmission standard.

I actually find that possibly due to the cooler, it doesn't warm up fast enough.

You'l find that if you use the steering wheel buttons for a couple of months you'll never look back and wonder why you said it was a bit of a wank.

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1337983
Share on other sites

Zymotic - It already has a good cooler for the transmission standard.

Good, how much power before it goes bang?

You'l find that if you use the steering wheel buttons for a couple of months you'll never look back and wonder why you said it was a bit of a wank.

Think I'm still getting used to the semi-auto type setup.

Maybe after i get used to the standard shift I'll trial the

wheel controls.

Do u use tiptronic mode for the track or drags?

Do u keep TCS on for track? (I've noticed when i give the

car a bit of stick one side of the rear seems to deaden [for

want of a better term] guess this is TCS at work, its wierd)

Had any dyno runs with your new hi flo?

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1338475
Share on other sites

Hasn't gone bang yet and I'm over 200 rwkw.

I wouldn't even bother with the standard shift.

I use tiptronic everywhere, street, track, strip.

I also turn the Traction control off as soon as I start the car every time. Actually it's been broken for a week which is fine with me.

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1338780
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...