Jump to content
SAU Community

Recommended Posts

wanlis are ok in the dry, but in the wet r shocking....

overall they are crap like nankgas

all the major brands tyres companies make good quality tyres and they all have their cheaper crap.

as stated above, you pay for wat you get.

...my 2 cents... :rolleyes:

"You get what you pay for" - That is the general impression that everyone has, but it only applies to a certain extent... I know of tyres that I have paid big money for (not using brand names as it will just look like Im bagging another product) that have not provided anywhere near the kind of performance that I wanted, then gone on to other tyes (such as Federal's) that have proven to provide more dry traction, wet control, mileage and comfort than the bigger brands at a much more reasonable price.

I understand that there are some very inexpensive brands flooding the market these days and it pays to do some research and ask around about what people use and like - that is why this thread is a great idea.

In a certain way you DO get what you pay for, but at the other end of the scale you can spend WAY to much on tyres that will only do what some mid market "cheaper" tyres will also do.

Its a matter of opinion. ;)

I agree Mick. You do get what you pay for to some extent (don't expect $200 tyres to out perform $500 tyres) but the less know brands need to make better tyres at cheaper prices than the big brands.

the best street tyres I've used were dunlop's top of the line Sp9000 sport (about 500 a corner) but the falken fk452 were close behind at half the price. Look to the performance tyres within a second tier brand for the best price/performance....falken/federal/toyo are all good choices.

But for god sake don't buy a performance car like a skyline and then put real cheap tyres on it. they will ruin the whole experience in a flash.

has anyone used Federal 595 RS the semi slicks?

im not much of a tyre guy but would these performa tad better than a normal say Federal 595

maybe not in the wet, but at least in the dry?

anyone had experiences with them

and i can get a set of 4) 225 45 r17 for about $900

any good?

I use the 595RS every now and then for the street but mainly for the track, there are also a LOT of members using the RS for hillclimb and track events in the ACT forum, you should ask around in there.

Basically the 595 is a street tyre and not really meant for track use, however it will give you a bit of fun for a while, just dont expect to put down your best times.

595's are excellent for drift though, we have had multiple drifters tell us that they are one of the best tyres to drift on.

595RS is 2 steps up from the 595 in regards to track use, the RS has a much softer tread compound and has a much stiffer tread face due to a "low void ratio", this makes for a better footprint on the road while under hard braking, cornering, acceleration.

The RS is much much better for dry traction than the 595 but is a bit of a compromise in the wet (as any semi-slick is), if youre planning on using the RS as a street tyre you probably wont get the most out of them though (even though they have heaps of grip) as they work the best when they're hot (about 60 - 70 degrees).

Have a look at - www.federaltyres.com.au, www.federaltire.com.tw or www.federaltire.com for more info.

I hope that helps :/

cheers thanks heaps mick :(

Anyway ill get to catch up with you soon anyway cause ill be coming back up to Canberra soon

so ill tag along to a friday night cruise with youse and have a chat ;)

There is a thread somewhere in the vic section for the Donellan's prices for Re55s - they are the cheapest I've seen even if you add delivery to Sydney for me

Cheers Duncan. Did a search and found it. How about Toyo Semi slicks?

hmmmm.....i bought my gtr with bridgestone so3 285/30/18 on it, car tracks badly, quite dangerous to drive......hold your breath, these tyres cost NZ$1060 each........so selling them and going for some toyo t1r sound like the go....ha

How is this for a score.

I recently bought a set of 19" inch Rays SF Challenge off a vendor on another forum from Yahoo JP. The wheels were auctioned with a set of B'Stones S-03's.

When they got here I get a call saying they came with no tyres. The guy says he'll see what he has when I go and pick them up or I can have some $$'s off the price.

I get there and you should have seen the smile on my face when he hands over a set Michellin pilot sport, PS2's wit 95% tread. These are OEM on Zonda's and in 275/35/19 push $900 a corner (so I've been told). Full credit to the vendor, as he didn't have to do this but wanted too.

These are the best tyres by far that i have ever driven on.

Dry Grip 10 (V35 struggles to break traction on a warm day)

Wet Grip 8-9

Ride - very silent and very smooth

Still waiting for feedback on the Hankook H424's.

The Hankook catalogue descibes the 424 was designed for V8's with a high silica content for superior grip.

Anyone fitted these ?

A comparison to the K104's would be good.

Cheers.

Edited by conan7772

I have'nt tried many, but mainly because I'm poor and can't afford $500 a corner.

I had Bridgestone Potenza G3 on my old wheels (came with the rims). Tried it on track, wasn't too bad, but I found it shocking in the wet.

Now I have a set of second hand Dunlop Sp3000 (got for next to nothing) or what ever that came out of the police cars. I was quite surprised that how well it performed at OP, considering it only had 50% thread left AND I had it on the front wheels AND I was pushing it soo hard, not once did it understeer. VERY plesantly surprised.

I have Toyo Teo I think, at the rear. Brand new, and the cheapest out of the Toyo range. Can't say much, as it is the rear wheel, all of them have broken traction at some point or another but I found it to be ok.

I had Bridgestone Potenza G3 on my old wheels (came with the rims). Tried it on track, wasn't too bad, but I found it shocking in the wet.

Interesting. I had GIII's on the front of my R31 and thought the grip was quite good. However, I had Falken 326's on the rear and a locked diff so I guess it's all relative :laughing-smiley-014:

had bridgestone potenza g3's 255 40 r17 and when i went to replace 2 the price blew me away so i asked the guy who ive dealt with for years what else will do the job.. i want a good quality tire but im not paying that!. he directed me to maxxis victra ma z1 in the same size.... they are better in the wet and just as good in the dry and alot cheaper. tread design is quiet and realy expells water. extremely soft compound but still seem to be wearing nicely.. hardly done any kms on them as yet cos no liscence :) but when the mates drive it down to victor harbour they are faultess tires!

best normal size car tire ive ever had on a 15 inch rim were parelli p6000 oh man did they grip only 215's and grip better than my cheap 235's r18's on the wagon.

just my experiences hope ive been of some benafit to someone

cheers

For a daily driver these are pretty good for the buck.

Kumho Ecsta Supra 712, 275/40/17 =$109USD Ea. (just to give an idea about pricing)

Falken FK451... good dry grip and good wet grip but tread life is poor IMO. And once the tread starts wearing the wet grip is terrible! It's like ice skating with your car if you go 80+kmh.

I'm looking to get either the Good Year Eagle F1 GS D3 or Toyo's T1to fit my 19's... unless I find something better in that price range (around $250 per corner).. any suggestions? :banana:

Edited by chak8080

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...