Jump to content
SAU Community

Recommended Posts

Hankook Ventus V12 EVO in 215/45R17 (fronts only)

Cost: $206ea

Dry Handling: Holds on really well through the corners, not much noise at all. Can't really compare to many other tyres as these were pretty much the first set on my 17"s.

Wet Handling: Also very good. Not much understeer through corners and actually grip really well, suprisingly.

I can't really give a proper rating since I haven't had much to compare to in performance tyres, but I would definately get another set of these.

Fitted Hankook Ventus R-S2's to the rear of my car yesterday. 18/40/235 on my 18x9.5 wheels (stretched fit)

wear rate is 200, but so far very good! wet weather was good, stable. and in the dry, they hold 350 odd RWKW's well.

  • 4 weeks later...
lol...Federals in the wet... better be paying attention!

in the dry they grip okay if you want to go in a straight line... forget about corners... make lots of smoke though:)

michelin pilot sports get my vote, even when secondhand they run rings around the Federals (thanks ZigenGT)

i agree the federal 595 SS are not that great. not too bad in the dry (6/10) but quite crap in the wet (4.5/10) mainly coz i think they hav quite a hard compound rubber but they do last quite a long time and are great for drifting and burnouts and they r fairly cheap. the federal 595 RS tires are awsome (265/35/18) 423hp at the wheels and no wheelspin in 2nd gear and only a bit in first and very grippy in the wet too. for $325 a tire im definately not complaining id say dry (8.5/10) wet (8/10)

The 595RS-R grips best when it is at 60 - 80C on the tread face, normally you wouldnt be able to generate that kind of heat on the street (unless you were driving very hard for a long time on a hot day).

However, compared to normal street tyres the 595RS-R will provide much more dry traction even when cold.

I use the RS-R's for street and track use and I dont think I will be able to go back to street tyres now, there is just so much grip available with them fitted to my Skyline... If you want extreme traction for the street you would be very happy with a set of 595RS-R's.

BTW - I have managed to get 30,000kms+ from a set of 595RS before - which goes to show that you can get good mileage from them. :P

i agree 595 RS will chop a 595 SS in grip no matter wat.

Edited by daineisdabomb
Got a choice between Federal 595SS or Toyo T1R in 225/50R16's for my new GTR..

Mainly for daily driven road use for now.. May see a track day later on if I haven't gone for larger rims by then.

Which one should I go for? Or much of a muchness. Price difference isn't too much between them. Both seem to be fairly favoured on here.

T1R for sure!! although they r probably a bit more expensive than the feds. softer compound i recon n awsome grip

Kumho KU31 (Previously owned)

225/40R18

Dry Handling 7/10

Wet Handling 7/10

Value 8.5/10

A good mid-range tyre that suited road use fine and are great for a car without too much power. They got a tad noisy but value for money you can't really go past them.

Ling Long somethings (Put on to get compliance, not my choice!)

Dry Handling 3.5/10

Wet Handling 1.5/10

Value 3/10

I guess you get what you pay for. Extremely hard compund, noisy and very little grip. Also hard to balance. The very next day after I got my car I took it into work and had to get them balanced again. It took a good balance from a very good balancing machine (Hunter Road Force) before I could get them to spin up nicely.

When I get some new wheels/tyres I will either be upgrading to Toyo Proxes R-1R's or Pirelli PZero Rosso's (Depending on what I can get the Pirellis for).

LING LONG, the name says it all lol.

Can anyone give me an impression on

Yokohama Advan Sport V103

Michelin Pilot Sport PS2

Bridgestone Adrenalin Potenza RE001

And price if anyone has brought these

Hey guyz can anyone tell me how these tyres are because i have to go for a track day in 2 weeks and need to decide on tyres.. The only reason is i have a tight budget and cant be spending to much.. ->DUNLOP LM702

If anyone knows of any good tyres that i could just use for the track day and something thats not to expensive please let me know!!

Hankook Ventus Sport (K104)

Dry: 6/10

Wet: 7/10

Value: 9/10

These tyres are just value for what you pay for. I did lose alot of traction though when putting the foot down until third gear. I paid around $200 at the time for 17s.

Hankook R-S2

Dry: 7/10

Wet: 8/10

Value: 8/10

Pretty much like the K104 but alot better traction - tends to chirp more than lose traction. These tyres are more to my liking for someone that only uses the car to get from A to B with a rare splash now and then. I paid $260 for 17s.

Toyo T1-R

Dry: 8/10

Wet: 9/10

Value: 7/10

Damn these were expensive, but I have to say that you really get what you pay for because these are fantastic! Honestly though, I would get cheaper tyres as I'm no racer and I don't drive around town like a hoon so all this great grip does nothing for me. I paid $450 for 19s.

i agree 595 RS will chop a 595 SS in grip no matter wat.

im running 595RS, 235/45 all round. so no huge grip on the rear.

on the track they grip up 1-2 laps before the guys running r comp tyres. so your right up the back of those guys until they grip up.

been to philip island twice and both times it has pisssssled down. the tyres amazed me, there is no way i could turn into turn one at the same speed

with normal street tyres.

done 7'ish days so far on these tyres. the center grooving has heaps on meat left. the outer grooving is wearing, to the point now were you cant really

see the outer grooving. (not running enough camber and the tyre is rolling over on the fronts.). have been rotating and swapping the rubber on the rims.

RS-R = 140 tread wear rating

RS = 180

KU36 = 180

Iam considering RSR's for the front of mine but not sure if they are overkill for what I use my car for. I would get the KU36's but they dont make them in my size.

Tim.

Yea car is used on weekends and for motorkhana's, drags, hill climbs etc. I know RS-Rs would be great for these events but they also need to do about 5000 ks per year on the road.

I will have a look into the rt615's. i was quoted 310$ per tyre for 255/35/18's for the RS-R's which is the size i need. I dont think that is a bad price?

Tim.

R32 GTS-T

Falken Ziex

235/45/R17

Did not like these one bit, cheap at $170 per wheel

Front end was bouncing all over the road, not much grip on the rears at all in the wet or dry.

I had some fun times running these on the rear while they turned to slicks lol i strongly do not advise !!!

Wet 4/10

Dry 5/10

Toyo T1R's

Ohh baby ive had these on the rears for around 1yr and they still have meat left on em, and still grip quite well :(:P

Wet 8/10

Dry 9/10

Next tire is going to be the Toyo R1R's on rear at 245/45/R17 in the coming weeks.

While i rotate those bad boy T1R's to the front :P @ 235/45/R17

  • 2 weeks later...

anyone on the big car forums have good Toyo deals? these T1r's sound good.

How would people rate/compare the

Federal 595 RS-R to the KU36? - In the boat of mostly street, with 2-3 track days a year (grip, not drift or drag)

Edited by SS8_Gohan
  • 2 weeks later...

Hi, do you know how to improve braking & handling?

When I stop from 100kms to 30kms in short distance, the tail shake left & right and unstable.

Any ways to improve body stable?

Also, what is the best tyres for track racing for 19"?

ANG32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got a full sheet set of OEM copied stickers to replace all the faded engine bay ones, great quality too.  Came from England. Someone like that should be able to to make u up what u want so long as u have a quality image to show them 🤷🏻‍♂️
    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
×
×
  • Create New...