Jump to content
SAU Community

Recommended Posts

Hi !

Could anyone tell me what turbo this is.

I bought it as a R34 N1 turbo though not sure if it is or not.

I have done a HEAP of searching and have found that 34 N1 turbos should have :

0.60 front

0.64 rear

9 blade rear wheel

No markings on the front compressor housing

These turbos have:

0.42 front

0.64 rear

9 blade rear wheel

No markings on front housing

Does this turbo look like an R34 N1 ?

There is no plaque

On the rear it has written:

0.64 428-2 TR7093

Any help appreciated !!! :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/
Share on other sites

Ok I will let you know these turbos are R34 N1 turbine because of the following:

1. it has no markings on front compressor while nismo turbos do ie a/r .60

2. it has nine blades at the back while r32 nismo turbs have 12

3. if it spins really, really, really easily than that means its a ball bearing turbo, while r32 nismo turbos are not.

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1343533
Share on other sites

Yeah those three points are valid

BUT

It has a compressor A/R of 0.42 instead of the 0.60 A/r

Apparently all R34 N1 turbos have a compressor A/R of 0.60

The A/R I can see written inside the "tube" part of the compressor housing (sorry not sure of the name of that particular bit of the turbo but where the compressed air goes out of the turbo and off to the intercooler).

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1343625
Share on other sites

OK guys

I ?think? I have similar turbos currently fitted to my R32 GTR (only just)

Part Number is : 14411-AA403 (both turbos did have the plaque)

Which according to Nissan are series 3 R34 N1s – with SS internals and BB rollers. They also have 9 blades

BUT

Mine also have a small separator between the rear turbine wheel and the waste gate (which yours do not seem to have – tho the picture is a little fizzy)

I have only just had them fitted and have not had the chance to fire them up yet, so I can't tell you how they will go. I'm waiting for PCF + EBC to be fitted in a week or so.

I'm also fairly sure they are .42 A/R on the comp side (can't be sure and the pics I have do not show it) and they came off an R34 V-spec II AFAIK

I do have a SQ (silly question) Are Nismo and N1 the SAME thing?

My understanding is that there are N1 turbos and Nismo turbos – and only the Nismo turbos have the .60 compressor housing - but I could be making it all up :cheers:

HtH

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1343650
Share on other sites

Indeed they are the specs of the 34N1s that UAS are selling

A search of the forum will reveal that there are many types of 34N1, and I have now found that they came out in a 0.42 compressor as well as a 0.60 A/R

Pete you got the ones with the 0.60 compressor which are the ones I was after, so I'm selling these and will try and get some with the larger compressor housing. Either that or I'm also working on the possibility of swapping the comp covers over to the larger housing.

EDIT: have found a pair of 0.60 A/R covers so will see if these fit once they arrive. in the meantime have taken off the market. if they dont fit i'll have to put them up for sale again. here's hoping!! :(

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1344187
Share on other sites

yeah no worry ,i lose track of whos who no here sometimes, i have got a another guy down this way chasing the r34n1 aswell

i'm concidering see if there any interest in group buy

as i was talking to turbotec yesterday and

there off the street price is ~$2325ea

if we get a group buy going ~$2000ea

not bad for such a great turbo(the turbos that won targa this year i believe)

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1344473
Share on other sites

Flicking through an old mag and they made mention of N1 turbos and NISMO Group A turbos. Both available through Nissan apparently.

Saying the N1s were same size as standard with better flow capabilities obviously and that the Group A turbos were identified by there larger 0.6 compressor housing. Maybe this is the confusion or group A turbos are something different again?

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1344537
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...