Jump to content
SAU Community

Clear up your headlights!!!

DJ Brave

By DJ Brave,
in General Maintenance

 Share

Recommended Posts

DJ Brave Experienced

DJ Brave

Posted
Posted

Just a little tip that i learned about the other day. If your headlights have a foggy look to them in the lense, get a MILD cut and polish on to the outside and they will look like new again. Makes a huge difference to the look of your car and my headlights are now alot better at night with a clear fog free lense!!

Hope this helps you all out. I wasnt keen on buying new lenses and now there is no need to. Spread the word fellow liners!!

Link to comment
https://www.sau.com.au/forums/topic/73363-clear-up-your-headlights/
Share on other sites
DJ Brave Experienced

DJ Brave

Posted
  • Author
Posted

a mild cut and polish means it has a small amount of abbraisive content to help remove the layer of dullness in paint surfaces. Paint is a kind of plastic when it dries, your headlights are plastic so it cleans them in a similar way. BUT, if you use a heavy grit cut and polish you may scratch your headlights perminantly= NOT GOOD!!! Try a standard polish first if you want and if that doesnt work then try the MILD cut and polish. Tell the guy in the shop what you are doing and he will probably put you on to the right stuff. My lights look great-like new.

Sambo33 Grand Master

Sambo33

Posted
Posted

I used Farecla G3 Liquid compound on mine, does the job good. The only thing is the haze will come back again in a few months. Im gonna try sanding headlights with P1200 & spraying a coat of 2 pak clear over em as a permanent fix, will post results when i do it.

Sam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • Dose Pipe Sutututu
      Unpeeling the Orange

      By Dose Pipe Sutututu · Posted

      When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Dose Pipe Sutututu
      RB20DE NEO smallbox clutch.

      By Dose Pipe Sutututu · Posted

      Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...