Jump to content
SAU Community

Recommended Posts

Nope - he was 0.1s slower than me.

The 1.08 was a 1.08.95 apparently. And the 1.04 never happened. The car had gearbox problems and of coarse as people do (see Brisby) they said "If the car was running I reckon we could have got a 1.04". (Yeah right!) It was an un-backed up boast thats all. The GTR was fastest and the Supra was second - less than 0.1s behind.

It is the full track. Last year the best time posted in this comp was a 1.13. I told Nige he should be aiming for a 1.10 before he left.

  • Replies 172
  • Created
  • Last Reply

Top Posters In This Topic

Well like i said then, its an awesome job to do that time around the full circuit. If the GTR is quicker again with its T88 then again that is a brilliant job.

A WRX time of 1:04 isnt impossible, but knowing the sort of mods the car would have had, id say its very unlikley. Hats off to the Supra and the GTR, they are brilliant times considering the problems and the amount of track time they had. Even with perfect prep and plenty of practice they are still brilliant times.

Anyone have secondhand tyres(17s) that even diametter all round for sale? I now have proper rims for the GTR but ran out of dosh for the rubber :P .

Mr Brisby if i can get rubber in time i'll go harvy with ya on that magic drum ( if Inasnt car is not in that is ).

Love to run on Sandown since its near my joint.

I'll drag the new car down there and race you troy with the fuse pulled on a couple laps to see what the gtst could have done with bigger turbos. Will that put me in rwd modified as well as 4wd? It sould be a good chance to learn how to slide a gtr around because after almost crashing it at over 140k on a turn after owning the car for 5 minutes I don't really trust it on the tighter corners going fast. The back goes out like the gtst but the front wheels pull you into the corner so you have to correct to oversteer as soon as the back starts to loose traction which I guess just means I can't be as lazy at driving. See you guys there.

LOL...im so pumped about this day. Its shaping up to the be the first track day since getting to Melbourne where the car will be sorted without a problem with tyres, brakes and tune all sorted:)

Thing is i want to throw on a new turbo but fear this will eman another few wasted track days until i get IT sorted...decisions - decisions:)

Gareth - good to see you've learnt that driving a GTR quickly isn't as easy as some Hill Billy's like to think. We've seen your not afraid to punt a car hard and you already know Sandown so I'm real keen to see what you can do around there.

No need to pull the fuse either as Roy now has more than the required 3 RWD Mod entries to compete against.

LOL...im so pumped about this day. Its shaping up to the be the first track day since getting to Melbourne where the car will be sorted without a problem with tyres, brakes and tune all sorted:)

Thing is i want to throw on a new turbo but fear this will eman another few wasted track days until i get IT sorted...decisions - decisions:)

Roy if your car doesent get towed off during atleast 1 session then it just wouldnt be right!!! :P

Yep - Nige is an SAU member. Member #053.

You also have Denham and Wayne anyways in RWD mod. So if Nige comes (btw - he has confirmed he is coming yesterday) that makes 4 cars in RWD mod at this stage to the best of my knowledge.

:P

Blah, blah, blah...ppl dont allow / listen to my excuses, so your time of ...that slow time...stands:)  

And that goes for Sandown and Phillip Island:)

Me walks off talking about a waste of +300rwkws :)

You stop ragging on me and ill leave you alone:)

Dont have any cash for engine rebuilds at the moment so now 300kw runs :P

Is this ur first time at sandown?

Did a 1:36, a 1:32 then a 1:30.06 then it rained.:P

3 hot laps, LOL on the first hot lap i went off at turn 1 and flat spotted the front left tyre which left me with a horrible vibration all day and a tendency to continue to lock that tyre:(

At the end of the day i was doing 1:31s in the drying conditions:)

Did a 1:36, a 1:32 then a 1:30.06 then it rained.:P    

3 hot laps, LOL on the first hot lap i went off at turn 1 and flat spotted the front left tyre which left me with a horrible vibration all day and a tendency to continue to lock that tyre:(

At the end of the day i was doing 1:31s in the drying conditions:)

I put down 1.32 expected time on the entry form

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...