7heavn Posted May 14, 2005 Share Posted May 14, 2005 Anyone out there using a blitz sbc-id boost controller need some help on changing the boost setting in the 4 channels . I downloaded the instructions from blitz.jp but they are not very clear on how to do it . Also the values aren't actually displayed in psi for some reason but some other number. any help would be appreciated . cheers Brett Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/ Share on other sites More sharing options...
williamsf1 Posted May 14, 2005 Share Posted May 14, 2005 Brett.... this might help http://www.mkiv.com/techarticles/blitz_dsbc/index.html http://www.splparts.com/doc/tech/EBC.htm http://www.mr2.com/ARTICLE/BlitzDualSBC.html as a side note I am getting BEL to do my tuning realllllllly soon Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1351537 Share on other sites More sharing options...
Guest two.06l Posted May 14, 2005 Share Posted May 14, 2005 Anyone out there using a blitz sbc-id boost controller need some help on changing the boost setting in the 4 channels . I downloaded the instructions from blitz.jp but they are not very clear on how to do it . Also the values aren't actually displayed in psi for some reason but some other number.any help would be appreciated . cheers Brett yeah the number business is confusing to say the least. we have ours set at 95 which gives us 28psi...this is channel 4 channel 3 is 75 channel 2 is 65 channel 1 is 55 dont know what the values are for the other channels as i dont use them! Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1351547 Share on other sites More sharing options...
7heavn Posted May 15, 2005 Author Share Posted May 15, 2005 Yeh it is abit confusing you would think they would just display the figures in psi . Moving up from 1.2bar just had a look the value for that is 65 what do you think the value for 1.3bar would be ?. Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1351938 Share on other sites More sharing options...
Cubes Posted May 15, 2005 Share Posted May 15, 2005 The Manual mode is unable to display the setting in PSI or any value as it represents maximum boost possible i.e 100 has the actuator see zero boost pressure. In other words the figure represents duty cycle of the solanoid. 100% closed. This is what it states in the manual anyhow. The Auto mode learns the boost curve and adjusts the 'duty cycle' to suit the rpm to obtain the boost you want. This is handy when you have a smallish turbo that tends to drop boost or an exhaust that is crap causing the turbo to drop boost in the higher rpm. The EBC see's boost dropping below the preset boost level and raises the duty cycle in an attempt to hold boost up. I had the Blitz SBC-iD in manual mode dropping boost (as did every other ebc that uses the duty cycle manual preset), flick it to manual and it held boost 1bar or what ever I dialed in with the rb20det turbo. However Auto mode can play funny buggers with low rpm and load up hills. Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1352703 Share on other sites More sharing options...
Roy Posted May 21, 2005 Share Posted May 21, 2005 Do these things have scramble? Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1365860 Share on other sites More sharing options...
raz0r$harP.UK Posted May 22, 2005 Share Posted May 22, 2005 i know the blitz dual sbc r have scramble... so im guessing the id3 should Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1366137 Share on other sites More sharing options...
williamsf1 Posted June 18, 2005 Share Posted June 18, 2005 hmmm ok I had massive over boosting last night..... looking for help on how to set this strange bit of kit up! both morgs and I were left scratching our heads???? SBC spec R.... Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1415763 Share on other sites More sharing options...
Race__24 Posted June 18, 2005 Share Posted June 18, 2005 Try this tread. It has alot of info and even some base settings Click Me Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1415794 Share on other sites More sharing options...
williamsf1 Posted June 18, 2005 Share Posted June 18, 2005 looks like the solinoid has failed! and Im back to actuator pressure....hmmmm 1 week old Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1416225 Share on other sites More sharing options...
IanH Posted June 18, 2005 Share Posted June 18, 2005 Blitz SBC-ID Manual in English - Here Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1416246 Share on other sites More sharing options...
Cubes Posted June 18, 2005 Share Posted June 18, 2005 Did you run the inline filter provided with the 'kit'? Link to comment https://www.sau.com.au/forums/topic/73557-anyone-using-blitz-sbc-id-need-some-help/#findComment-1416330 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now