Jump to content
SAU Community

Recommended Posts

All RB's sound slightly different to one another yet still sound similar.

Like most of the time, you can tell the sound of an RB25 exhaust note to an RB20.

however, the RB26 sounds different to all of them.

my question is what is it that makes it different?

It just sounds alot tougher than the other RB's.

so what is the reason for this?

At idle, or cruising on WOT.

they just sound ALOT tougher than the other RB's.

is it the fact that there are 2 turbos?

is it the individual throttle?

is it cams?

I understand that the exhaust system has a lot to do with it, but no other RB sounds quite like an RB26.

I don't want replies like "because teh GTR can neva lose" or something equally stupid.

This is a serious question on what gives the RB26 an angrier note.

Link to comment
https://www.sau.com.au/forums/topic/73697-rb-sound-differences/
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

i'd say the twin turbos would have fark all to do with it. like abo said a big part could be the solid lifters, multi throttles would also change the note. plus head design inlet and exhaust ports shape would have an effect.

All these differences contribute. That's why a Ducati sounds different to a VTR Honda, which is different to an RSV Aprilia. They are all twins and - different cans aside - the Ducati still has a distinct exhaust note primarily due to the valve train design. Hence the Desmosedici head engines sound different again to their predecessors.

they (RB26's) just sound ALOT tougher than the other RB's.

sorry but ill have to flat out disagree with that! :D

i do definitly agree they sound different, and from my own description id tend to say they sound more "mechanical" in their note. I think you need to hear my 25 at full noise :D

From the 26's ive heard, i reckon the 25's have a "sweeter" and more "howling" note, and not as harsh sounding as 26's. As for reasons why, i think theyve all been covered. Of course exhaust systems are going to make each and every one sound different so i guess it comes down to personal preference.

its also very possible that i just havent heard a really nice sounding 26!

cheers.

Any one who has changed thier turbo to a larger item will know how the exhaust becomes louder and more angry sounding. :D

I've heard RB25's that sound mighty tough. It simply comes down to the exhaust.

The RB30 sounds a little deeper than the rb20, it does sound nicer, especially if I jam the wastegate open it becomes much louder and brup brup sounding. :D

Since converting the RB25 to a GTR34 twin turbo setup, the difference is in the fact that the 2 turbos separate the pulse of the front and rear 3 cylinders. They don't merge until after the firewall. It was very noticeable, especially with another 25 to compare to in the garage.

I have the HKS style split pipes as well so it is a bit louder, but it all bolted straight up to the single cat location :D

So while some of these other points are slight contributors, it's mainly the turbo configuration. And, It sounds PHAT as hell :D

they do sound more mechanical and that is what I would say is tough.

get a stock rb26 with an exhaust and any other stock RB with an exhaust, and the rb26 sounds a lot more angry, mechanical, harsh, tough.... what ever you want to call it.

I just like it and wanted to know what caused it.

I don't agree that it's the turbo's.

if that were the case, then an rb26 with a large single would sound like an rb25 with a large single..

but it doesn't.

still sounds more mechanical.

I'm going to go with the thought that it is the combination of cams, exhausts ports (if they are infact different), throttles...

Since converting the RB25 to a GTR34 twin turbo setup, the difference is in the fact that the 2 turbos separate the pulse of the front and rear 3 cylinders. They don't merge until after the firewall.  It was very noticeable, especially with another 25 to compare to in the garage.

I have the HKS style split pipes as well so it is a bit louder, but it all bolted straight up to the single cat location :D

So while some of these other points are slight contributors, it's mainly the turbo configuration. And, It sounds PHAT as hell :D

It's ALIVE!! I want a spin in it

I don't agree that it's the turbo's.

if that were the case, then an rb26 with a large single would sound like an rb25 with a large single..

but it doesn't.

still sounds more mechanical.

I'm going to go with the thought that it is the combination of cams, exhausts ports (if they are infact different), throttles...

Sure mate, and you compared this to a handy RB25DETT just to tell me I'm wrong. Thought you'd appreciate an answer from someone who has done the conversion and speaks from experience, but obviously you didn't need help.

Yep, up close with the bonnet up the solid lifters cause a fair bit of mechanical rattling, but even after yesterdays cruise with variously configured GTR's to listen to from inside the nice quiet Soarer there is a distinct difference between singles and twins (and the luxobarge gave me plenty of chances to get passed :D)). A lot to do with the various exhaust systems as well with similar single or twin configurations.

As far as the cams go, I fitted a set of GTR cams and found the top had a bit more power at the expense of low rpm, but it wasn't a different note.

In fact, with a blind comparison I'd suggest none of us could tell the difference. Most well worked GTR's that stick in the mind with a great note are bolted together with good quality kit, including the exhaust. I'd suggest most are just a little too overawed by the whole GTR "thing". I'm no detractor of the GTR, in fact I expect to be buying a GTR33 next month to take the garage to 5 slots, but there is a lot of "it's a GTR so it's too cool".

Compare the Fujitsubo Jasma system on my track car to after the TT conversion and it changed dramatically, the only difference the TT setup I fabricated. Then I put a 3.25 Trust Jasma system on my auto 25t and it's a lot different again, but the NA 33 that it came off made it sound a bit coarse. Next I'll put the 3" front pipe on the auto and I bet it changes again.

Marcus,

it dropped compression on a couple of cylinders at 5psi boost in second after I installed some injectors that I stupidly didn't check for flow rate. Looks like another rebuild before that ride mate, but it was nice until it lost power.

geoff - please don't be offended.

I haven't heard a 25dett.

I have heard 26dett and 26deT and the exhaust note wasn't that different.

it was different... but not much. It still sounded much like a gtr then any rb25det with large turbo that I have been in or been behind to hear the exhaust.

I didn't mean to say that you were wrong..

I just assumed that the other things listed would give the car the rougher sound.

maybe useful to split sounds up into:

induction - filter/s, compressor/s, bov/s, throttle/s, plenum

exhaust - manifold design, turbine/s, wastegate/s, cat, muffler

engine - I am no expert but from above lifters, capacity???? RB20, RB25, RB26, RB30

induction/exhaust noises may more depend just on the turbo system bolt on design (ie single, twin, big, small) and the exhaust gas potential of the engine

what do the N/A versions of these engines sound like with an exhaust, say an rb25de - are they almost louder because the turbo doesnt 'muffle' the exhaust note??

GTST, none taken, and sorry to come across as if I was. I know what you are getting at though, but the TT really changed the entire sound from idle to further up the revs. It was already pretty good but after it just transformed and it confirmed the reason that particuler note comes from the 26. Plus mine also is a 2.6 in capacity now so that is not a huge factor in sound, but it has improved off boost torque due to increased compression.

The 25DE is a fair bit louder with the same exhaust as I had the opportunity to hear when I bought the Trust. I did the swap right away off the other car which got the stock cat back and it went from a sharp loud bark on the DE to a sweet deep rumble on the DET.

BTW the auto is stock except for the zorst and is an absolut POS power wise. Any boost over 10psi and it cuts hard. Any under 8 and it is a big doughy mess.

I agree the RB26 sounds tough.....

Personally dont know why..

Altho ive been told my gtst sounds similar to a GTR when in high revs..

So i dunno...

Just thought id share 26's do sound awesome..

The RB30 sounds a little deeper than the rb20, it does sound nicer, especially if I jam the wastegate open it becomes much louder and brup brup sounding. :D

The RB30 sounds like a commonwhore... in which it is.. Yes a bit deeper, but yucky.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...