Jump to content
SAU Community

Recommended Posts

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Im guessing that the 26 and 25 have the same firing order?#

Other wise, cams, 6 throttle bodies would have a big impact, and exhaust manifold design... Are the valve sizes the same on the 25 & 26? I dont think solid lifters would have an effect on exhaust sound, apart from the cam differences. I had an SR with different turbo/exhaust manifold and sounded much different from any sr i heard before, very raspy and much tougher....

I think that the only way a 25 or an rb for that matter could sound like a commodore would be if it was non-turbo... But ive never heard a turbo rb make the fart like sound of the old 202, or any of the v6's.

i reckon the rb20 sounds better than the rb25, sr20 or CA18 - I havent heard the RB26 enough times to know but I expect it would sound different and better

Think so? The RB20 sounds like a tinny version of the 25. (I used to own a 32 GTS-T)

the rb30e may sound shitter, but the rb25/30 hybrid has got its own sound. Id say the rb20 sounds like a car with a fat exhaust note - more noise than HP, then the rb25 sounds a bit gutsier, rb26 sounds different again (id say due to all previos things mentioned).

The rb30 has a very deep rumble note. I dropped it in my car changing nothing else but the engine, and it sounds like the rb20 did, but with a better rumble...like its talking the talk now its walking the walk ;)

if you put a rb26 head on a rb30 and leave all the support gear ie turbo, manifolds, exhaust and inlet they sound the same.... the acoustics of the engine come from the valvetrain and head design as mentioned in the ducatti analogy, its all to do with the head design.... rb30 single cam engines sound crap cause of the shit head they are running!!!! The rb20 and 26 use the same head casting but very different set ups and the reasone an rb20 sounds different to a rb25 that has the same valve train set up is the camber circumferance is only 77mm not 86 thus the rb25 has a deeper note.....

Since converting the RB25 to a GTR34 twin turbo setup, the difference is in the fact that the 2 turbos separate the pulse of the front and rear 3 cylinders. They don't merge until after the firewall.  It was very noticeable, especially with another 25 to compare to in the garage.

I have the HKS style split pipes as well so it is a bit louder, but it all bolted straight up to the single cat location :rofl:

So while some of these other points are slight contributors, it's mainly the turbo configuration. And, It sounds PHAT as hell ;)

I also have a RB25DETT but in a RS13 and it doesn't sound quite the same as an RB26DETT to me. I suspect the RB26's throttlebodies are the main reason.

A RB25DETT does sound gorgeous though, a bit higher pitched than the GTR's I've been in.

  • 6 years later...

Bit of an oldie but i have a question!!!!!!! - My s14 (rb25det) seems to sound like some sort of angry whippersnipper ?!

6boost mani, 3 inch dump/front into cat, then 3 inch all the way to some weird twin pipe muffler thing(xforce? - its sh^t) ive dropped it at the diff before (removing the last muffler) and the whippersnipper just gets angrier and begins to sound like a rally car.....has anyone else experienced this lol?

Aiden

no one has mentioned the difference in stroke with each rb, the rb26 to me sounds more like a motor bike with its shorter stroke, the rb25 is shorter and the rb30 shorter again, so maybe its the stroke that play a big role as well as the compression ratio's of each rb.

Ive noticed the turbo makes a big difference as in how well it flows and spools makes the sound of the gases both intake and exhaust rush in and out faster making it sound really angry or a bit soft..

no one has mentioned the difference in stroke with each rb, the rb26 to me sounds more like a motor bike with its shorter stroke, the rb25 is shorter and the rb30 shorter again, so maybe its the stroke that play a big role as well as the compression ratio's of each rb.

Ive noticed the turbo makes a big difference as in how well it flows and spools makes the sound of the gases both intake and exhaust rush in and out faster making it sound really angry or a bit soft..

:huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...