Jump to content
SAU Community

GT4 Drifting Thread

CSV Imports

By CSV Imports,
in PC & Games Discussion

 Share

Recommended Posts

Adam_RSX Proficient

Adam_RSX

Posted
Posted
"original" parts from tuning houses are good, esp the original suspension upgrades, as they are very stiff. and don't require alot of setup for drift.... ohh yeah, and turn of ASM & TC. Also if you want a fast dori racer then the "original" or stage 5 turbo is good as it has a bucket load of low RPM pulling power.

TCS and ASM should be switched off at all times anyway

Archie@ Experienced

Archie@

Posted
Posted
whats so bad about playing with it on?

it's not that it's bad, but the cars feel more responsive and are considerably quicker with ASM & TC off, has a much more realistic feel to it.

it's also heaps more fun being able pitch your car sideways into a corner... :devil1:

TokyoTaxi Veteran

TokyoTaxi

Posted
Posted
Save your replay then play it in replay theatre, press select while its playing to take pics. Or just do a photo drive.

Thanks VIPERGTSR01 I'll give it a go. Should produce some interesting pictures considering my demented driving style ;)

VIPERGTSR01 Rising Star

VIPERGTSR01

Posted
Posted
whats so bad about playing with it on?

I hate it with a passion, I drive much faster with it off.

If come on to the corner with abit of weight shift to counter some understeer the assists go off throttle and cause me to slow down drastically. The only time ive used assists on purpose is with my Nissan R92CP on Hong Kong track because of the crazy lag and then wheel spin behaviour of the Nissan at Hong Kongs low speed corners, even then I only put TCS on 2 and the rest is still off.

Kristov Enthusiast

Kristov

Posted
Posted
my friend just bought hks d1 s15.  

car is next to impossible to drift. lag lag lag boost peak. thing either spins or drives straight into a wall. spins wheels in 4th gear etc.

any one know how to get it right?

Ive spent a bit of time working on it. You have to put good tyres on it and play around with the gear ratios. Ie make them bigger. I cant drift with full power on you tap the throttle quickly should be able to hold drift without spinning out. How do you start your entry i cant feint drift very well with it only handbrake entry. But how good does it look :rofl: .

  • 4 weeks later...
Richo Mentor

Richo

Posted
Posted

The best car to drift on GT4 is the Mazda Falken RX-7 D1GP, don't touch any settings to it just put some NOS for that extra kick when need it in the middle of a drift and maybe upgrade the turbo, the rest just comes naturally with this car. give it a go when you get the hang of it with this car you dont want to drive anything else.

  • 2 weeks later...
D-limo Veteran

D-limo

Posted
Posted
my friend just bought hks d1 s15.  

car is next to impossible to drift. lag lag lag boost peak. thing either spins or drives straight into a wall. spins wheels in 4th gear etc.

any one know how to get it right?

Same thing happened to me at the start....Bought the BLITz and HKS D1 cars and couldn't drift them at all!

First thing to do obviously is turn all the driving aids off...

Then change the tyres to either normal "ecomomy" or normal "comfort"depending on what power the car is making ... Doing this really helps alot making sliding more predictable and easier, though you may have to change ur style a bit.

Also playing with the suspension can help if you get it right..... Try starting with upping the stabilizers to 5 each, camber at least 2.5 and 1.5 front/rear respectively, then work on the spring rates from there.

TURISMO Experienced

TURISMO

Posted
Posted

I found the HKS s15 impossible to drift at first, but with a power up (phat turbo) it was allright, but still easier in my road s15, but when i was actually racing it for fun one day, I decided to put on traction control (just to level 1) so I wouldn't just sit there and spin wheels and it drifted every corner perfectly. Give it a go, just remember, big turbo, no assistance except for TC on level 1. Works a charm ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      Whoops!
×
×
  • Create New...