Jump to content
SAU Community

Recommended Posts

Well I must say I'm very disappointed.

Firstly, I've learn't one thing. There's no point in having oodles of power, if you can't put it down to the ground until halfway up the track.

Secondly, rock hard coilovers plus stiff 18" tyre sidewalls do NOT make for good launches.

Thirdly, I need slicks to cut any decent times in my car :)

Okay, basically the best time I ran tonight was a 13.1 @ 112.9mph... That mph translates to a high 11 second pass, but predictable traction problems kept me from gaining any traction until mid track...

Also, the launch is a fiddly thing. DMS coilovers and 18" rims make for LOTS and LOTS of axle-tramping off the line, and no traction. If I reduce the launch rpm, I'll bog down and have to wait 2-3 seconds for the turbo to re-spool... There is no middle ground, plus with my new triple plate clutch, there is no such thing as "slipping it off the line"...

Basically my only option was to dial up 4500 rpm, let the clutch out and wheelspin all the way through first and halfway through second. This was with a burnout-warmed 265/35ZR18 Dunlop D01Js too...

So basically I'll need slicks, and perhaps get hold of some stock shocks/springs and then head back out there.

Oh yes. I nearly forgot. On my last pass, I dialed up 4500rpm and launched it, only to hear this massive CRAAAAAAAACK, and the car just stopped dead. Everything went silent for a while there. I have successfully broken my drivetrain. I predict that it's the rear differential, but I guess I'll find out tomorrow. :goddam:

Link to comment
https://www.sau.com.au/forums/topic/7619-results-of-ec-drags-181202/
Share on other sites

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by DON91E

Yeh man, definately not a good idea to lauch with 18s bro, you'll get no flex on your 35 profile tires :D

Try 55's on stock rims with semi slicks b4 u go to slicks just to keep the street creed :)

Yeah dude... That's why I even bothered to go out there with the 18s... So I could set a time on the tyres that I normally drive the car on...

No point in doing a 10 second pass on slicks with nitrous if I can only do a 13.1 with my normal street rubber and no NOS :)

Oh well... I guess my car sucks with normal road rubber... Someone give me ATESSA!!! ;)

saw all the skylines run last night

the problem is too much wheelspin

they just spin spin spin about 1/4 of the track

the best was a skyline which was spinning so much (like doing a burnout) and wouldnt shift up to 2nd

classic

if you have alot of power

maybe try launch in 2nd, or hit 1st but dont hold it long and straight upshift

it is amazing to see a skyline run like a 14sec pass

then a 20B rotary drag car come up with huge slicks and launch it so cleanly and record a 7sec pass

wow!!!

good luck getting your car fixed fast and cheap but with quality :)

slicks are the best u can get for the track

my mates r33 GTST can beat a friends WRX, the WRX ran a low 13, my friend couldnt get the power down so he got like a 14.5

the dragstrip is now too old and def needs this new place to be built, some fast times will come on the new strip, less sticky crappy oil tarmac and some smooth (roadlike) surfaces for a while

Good news people!!!

I managed to cleanly snap the right driveshaft, and my diff was unhurt, so I was lucky this time...

It's been replaced with another standard driveshaft, and next time I head out there, I'll be sporting 16" slicks or 15"s if we can manage to fit 15"s over the rear brakes... Anyone done this before?

I'll put photos of the driveshaft up soon :)

TOO MUCH POWAAAAAAAAH!!!

Originally posted by Merli

I managed to cleanly snap the right driveshaft, and my diff was unhurt, so I was lucky this time...

Damn it - I was going to suggest a mechanical diff as a replacement.

I'm glad it will be cheaper to fix that your first thought.

J

Originally posted by akira

Dont worry about Ur time dude.

Ur car is still faster then 99% of GTST's  here.

:)

i disagree with ur perception here.....just becos a car make big horsepower doesnt mean its fast. if at the lights or on track and u can't kick a less modified less horsepowered car then obviously all that horsepower, money and time are wasted.

Originally posted by VISHES

i disagree with ur perception here.....just becos a car make big horsepower doesnt mean its fast. if at the lights or on track and u can't kick a less modified less horsepowered car then obviously all that horsepower, money and time are wasted.

i disagree with your reaction of the perception.. :)

yes big horsepower doesnt necessarily mean its fast as you might not get it too the ground... but i certainly wouldnt equate it to money and time being wasted either.

have the fun comes when you cannot get it to the ground. :burnout:

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...