Jump to content
SAU Community

Recommended Posts

Hey all,

I am Currently Speaking with a carbon fibre Workshop,

I will be getting moulds done of the following...No fibre galss will be used Pure Carbon...

GTR R32 DASH

GTR R32 LEFT/RIGHT DOOR'S (option of Lexan/Glass/Fixed/Standard)

GTR R32 BOOTLID

GTR R32 FRONT GUARDS

GTR R32 REAR GAURDS

GTR R32 HEADLIGHT INTAKE

GTR R32 BONNET

Please get back to me on Interest And please state what part your interested in

As for prices the more we get the cheaper they are...

Cant say how much exactly but Prices will be bargain...

cheers PM preferred

What type of time frame are you looking at because I put my R32 gtr sideways into a tyre barrier at around 80kmh on sunday and wrote off the whole left side of my car. What are the wrough prices on the doors and guards.

I would be interested in getting the lexen glass for the doors not the doors themselves, I would also be interested in carbon headlight intake, carbon bootlid, and definately the dash, I will take a dash regardless of anything else!!! Are you gaugin interest to see its worth trying to get a bulk discount??? I know this stuff is expensive and I am not going to haggle on price but a rough indication would be good before I commit!!

Cheers,

Daniel.

Hey all..There seems to be alot of interest in these parts...

ATM We will be getting molds done of my gtr panels etc...Dash etc...

So i just want to ensure that people will buy the products from him so we are all happy..

Pricing will vary...Mostly go up in price but not to much prob 100-200max

THIS PRODUCTS ARE FULL CARBON....

Bonnet R32 $900

Dash r32 $600 (Not yet finalised)

Front guards $600-900 pair (Not yet finalised)

Headlight intake (Not yet finalised)

DOORS $850-1000each (Not yet finalised)

BOOTLID $500-700 (Not yet finalised)

Please let me know Judging for these pricing if you want anything..

PLEASE BE 100% SURE IF YOU WANT SOMETHING OR NOT...

cheers

I am interested in a headlight intake like the tomei ones. doesn't even have to be carbon. please let me know when you have firmed up the pricing on these.

Cheers.

Hey all...

Sorry for not being so un organised with pricing etc...

The prices i have put up are NOT the pricing for everyone..This is my new sponsor and are prices where based upon my usage...

There are more options You can get Either FULL CARBON PARTS or Fibre GLass parts for Less $$$$$

I will be getting Exact pricing either tomorrow or Friday

Cheers

Sorry for any delays

with the prices you posted up above for a guide, are they for carbon top layer?

i would be very close to purchasing a boot lid/ bonet(depending on style with vent),

and possibly doors with lexcen, but would need definate price on all first.

The prices i put up Where only for me...

You can either buy FULL CARBON PARTS cost fair bit more

Or

Fibre glass + Carbon mix which is cheaper

I will getting Prices Either tomorrow or Friday

The prices i put up Where only for me...

You can either buy FULL CARBON PARTS cost fair bit more

Or  

Fibre glass + Carbon mix which is cheaper

I will getting Prices Either tomorrow or Friday

Cheapest full front ,bonnett guards fibregalss no carbon is that an option for tight arse Minto's like me ??? thanks champ

Also be interested in the dash, though I worry a little about having a shiney finished on top of C/F: wouldn't it reflect sunlight and also have a reflection on the windscreen.

I'd also like to see some C/F aircon vents :)

LW.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...