Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

There is apparently a CA18 R33 as well...

Nope, only the R32 was cursed with the CA18, was called the GXi.

Though the R33 GTS has the RB20E (ie SOHC head) which is almost as bad (no offence to GTS owners out there!).....

You are correct about the GTS4 - Stevie's post is wrong, there is no such thing as a (factory) 2.5L Turbo GTS4, unless it has been converted using a RS4 Stagea motor.

:sadam: :sadam:

Nope, only the R32 was cursed with the CA18, was called the GXi.

Though the R33 GTS has the RB20E (ie SOHC head) which is almost as bad (no offence to GTS owners out there!).....

You are correct about the GTS4 - Stevie's post is wrong, there is no such thing as a (factory) 2.5L Turbo GTS4, unless it has been converted using a RS4 Stagea motor.

Hello

Those who remember the story about my skyline r33..

i recently on the weekend found the firewall plate.

i found waht engine i have.

it is a RB25DE. ENGINE AT 2.5L.

im amazed at the acceleration this vehicle has.

it's crazy. :jump:

Those who remember the story about my skyline r33..

i recently on the weekend found the firewall plate.

i found waht engine i have.

it is a RB25DE. ENGINE AT 2.5L.

im amazed at the acceleration this vehicle has.

it's crazy

Sweet, it's a GTS25 then. If you can have a look at the muffler, assuming it still has the standard one look for a mechanism attached to 1 of the 2 outlets from the rear of the muffler. If there is a valve looking mechanism there, then you have a type S with 147kw. If not then you've got 140kw.

Other place to look is behind the boot lining on the left hand side below where the jack is located, you'll see an actuator with a cable that runs to the valve in the muffler. If the actuator isn't there then it isn't a type S.

Minor details though, if you buy it have fun!

Nope, only the R32 was cursed with the CA18, was called the GXi.

Though the R33 GTS has the RB20E (ie SOHC head) which is almost as bad (no offence to GTS owners out there!).....

You are correct about the GTS4 - Stevie's post is wrong, there is no such thing as a (factory) 2.5L Turbo GTS4, unless it has been converted using a RS4 Stagea motor.

ahh yeh my bad.. R32s :(:D:D

  • 4 weeks later...
:sadam:  :sadam:  

Hello

Those who remember the story about my skyline r33..

i recently on the weekend found the firewall plate.

i found waht engine i have.

it is a RB25DE. ENGINE AT 2.5L.

im amazed at the acceleration this vehicle has.

it's crazy. :jump:

Mqy mechanic just found that my clutch is out.

my pressure plates are fked.

the japanese that owned it last stuffed it the clutch.

i got it as as japanese import ,so, they must have been .

the japanese cant have there car for more than 100.000 kms.

then it's taken to the wrecker or imported here.

mine was imported to australia and i brought it.

People in my class think it waS A mistake for buying it for it has a stuffed clutch.

now my mechanic thinks its gonna cost me $700 to buy a new one.

come to think of it my clutch aint completely fked like it still runs but the gears are slipping.

please reply give me your views

classmates are beggining to make me regret buying it for 15,000. :chairshot

cheers

that's right go hide under your turbo!  :chairshot  

seriously the car isn't as bad as the turbo driver's say and we get to bag all thsoe turbo driver's who can barely go half the distance off 1 fuel tank. i been hearing they get something like 250km/tank.

im getting somewhere in the vacinity of 450 to 500 kms to a tank if i drive casual.

$15000 k is pretty steep considering its an atmo FLYR33 but if its in good nick low k's etc who cares you'll probally drive it through the floor anyway just have fun with it man.

Congrats Hey!!!

ohh yeah your clutch ... buy a new one fix the problem before you get more!!! (gota love the japs most of them couldnt give a shit about their cars lol)

you dont need a heavy duty or twin plate carbon special triple plate mother of a sucker just the factory one ...

you can get one of the pretty cheap from justjap i think ----> www.justjap.com

just out of curiousity did you get a waranty when you bought it?

p.s. dude all skylines bar a few local sold r32 gtr's are imports

hey, i also got a N/A 33 for my first car, if you have any send some pics, would be nice to see what kind of condition it is in. Mine is a black 93 gts25 and im happy with it but will probly doing a conversion soon. i got mine for $12 500 and it goes very well. get back to me with some pics or something, cheers eli

[email protected]

I have never heard of an R33 GTS4 Turbo, all the 33 GTS4's I've seen have been NA

The only other single turbo GTS4 I've seen is an R32 GTS4.

and before someone makes a smart arsed comment, GTR's with single turbo conversions dont count :P:)

I used to have R33 GTS-4, and plan was to turbo by putting RB26DETT but then money ran out :)

$15000 isnt expensive considering u r the first owner in Oz... u do get what u pay for...

i paid a little more than that with few low km's (just passed 80000 this morning)

genuine km - got paper work to go with it. its in good nick and never a problem.

clutches do tend to go and an R33 GTST stocko or equivalent is a sufficient upgrade.

Sweet, it's a GTS25 then. If you can have a look at the muffler, assuming it still has the standard one look for a mechanism attached to 1 of the 2 outlets from the rear of the muffler. If there is a valve looking mechanism there, then you have a type S with 147kw. If not then you've got 140kw.

Other place to look is behind the boot lining on the left hand side below where the jack is located, you'll see an actuator with a cable that runs to the valve in the muffler. If the actuator isn't there then it isn't a type S.

Minor details though, if you buy it have fun!

Hey Ant, what's the go with this type S 140/147kws? how does that valve mechanism add the 7 kws? Obviously something to do with the exhaust but how does it work exactly?

hey, i also got a N/A 33 for my first car, if you have any send some pics, would be nice to see what kind of condition it is in. Mine is a black 93 gts25 and im happy with it but will probly doing a conversion soon. i got mine for $12 500 and it goes very well. get back to me with some pics or something, cheers eli

[email protected]

Ey

i got mine unregistered for 14000.

its white and all stock.

its had no more than 80,000 kms , the japs can't keep it for very long.

Eli,are you a chik.....?

neva known a chik driving a skyline.

if so your the first. :)

i don't want no Mods yet.......

it'l cost be more wif insurance.

just got interior mods.

u no the usual

working on the stereo at the moment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...