Jump to content
SAU Community

Cam Gear & Dyno Tuning Results @ Croydon Racing Development


Recommended Posts

I am extremely happy, it drives like a standard GTR @ 60kmh in 5th gear (1300rpm)

2nd gear breaks traction at all 4’s on shear acceleration J

Please refer to attached graph, this is my 4 wheel dyno tune figure by CRD on the 20th June (my birthday)…

THE CAM GEAR DEBACLE…now proven!

I was there from start to finish & saw the comparable difference.

The red line (on the graph) is tuned with cam gears at 0 degrees

The blue line (on the graph) is with tuned cam gears - keep in mind I do have the poncams…what a difference!

Jim has made an additional 100Nm without sacrificing top end delivery…

This proves that adjustable cam gears do make the difference & that Jims dyno tune has made a massive difference in torque!

Only the experienced guru’s of the industry are aware of this advantage.

I also had a long discussion about road tuning with Jim – he is of the opinion that you cannot simulate ‘load tuning’

i.e. load tuning at various rpm’s for a specified time period, where can you do this on the road & how can you road tune a car under load?

At the end of the day Jim has 15 years experience with GTR tuning & the experience alone is working with all facets such as drag, targa, circuit, national teams, race production class etc….who else in Australia works alongside with top tuners in Japan & national racing teams? I guess this is why he is the busiest workshop in Australia, just have a look at the number of performance cars he has in his workshop & yard (over 30 cars).

YOU PAY FOR WHAT YOU GET – yes other tuners are cheaper but you will not reach the maximum potential if cam gears are not adjusted to suit the setup.

The way I see it, if you are prepared to spend over 10k on an engine then investing another $400 additional for a proper tune is the way to go…

Question: would you pay the small difference in tuning for an extra 100Nm of torque?

I am not here to convince you or sell CRD but I did want to share my experience with you as I am extremely happy with the outcome.

Thank you Jim ;)

Regards,

Marko

0404 884 876

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yeah, I was curious about that too. my guess is boost controll. certainly a very nice number. Very sharp curve. BIG fat top end, but the bottom end seems a little dissapointing to me. I would personally like more 'area under the cruve', but i don't think that's a reflection on CRD more a turbo choice thing. Do you have a graph with Y axis in RPM instead of speed? if so could you post it up?

enjoy mate ;)

The way I see it, if you are prepared to spend over 10k on an engine then investing another $400 additional for a proper tune is the way to go…

Agreed, but you'd be a miracle worker to get Jim to tune a GTR for $400.

$500 is what he normally charges just to dial-in cam gears, let alone TUNE the GTR.

A basic GTR tune starts at $800 and rapidly increases from there.

I have never stepped foot in that workshop without being slapped with a bill LESS than $1000.

Agreed, but you'd be a miracle worker to get Jim to tune a GTR for $400.

$500 is what he normally charges just to dial-in cam gears, let alone TUNE the GTR.  

A basic GTR tune starts at $800 and rapidly increases from there.

I have never stepped foot in that workshop without being slapped with a bill LESS than $1000.

I spoke to them today they said $350-750 for a full tune :) who knows but..

Doing a power run on Saterday morning to see what this biatch is making :Pimp2:

Merli,

Im with blk180....he is saying that it is only an additional $400 or so in comparison to most tuners who charge anywhere b/w 500-700 etc...

Im in agreeance with you marko....fantatsic results...wow pretty impressive!!! Im amazed at the difference with the cam adjustment...thats worth the extra $$ to me!!

I spoke to them today they said $350-750 for a full tune  :) who knows but..

Doing a power run on Saterday morning to see what this biatch is making  :Pimp2:

I'll bet you $50 that he wants to change the oil, and spark plugs before tuning it.

And it seems the more power a GTR makes, the more he charges... Presumably because there's more liability and less room for error with highly-strung GTR engines.

Understandable I guess, but it gets old when you're told "$350-750" and then get slapped in the face with a $1500 bill.

Anyway, good luck, and you have to come to the next dinner and let me take it for a spin... I'm having major power withdrawls :P

P.S. Have you put on an oil cooler yet? :squint:

I'll bet you $50 that he wants to change the oil, and spark plugs before tuning it.

And it seems the more power a GTR makes, the more he charges... Presumably because there's more liability and less room for error with highly-strung GTR engines.  

Understandable I guess, but it gets old when you're told "$350-750" and then get slapped in the face with a $1500 bill.

Anyway, good luck, and you have to come to the next dinner and let me take it for a spin... I'm having major power withdrawls :)

P.S. Have you put on an oil cooler yet? :squint:

I'll come to this months dinner..

I was going to get an Oil cooler but after 4 new so3's + rego i have no bling bling left :P

I'll come to this months dinner..

I was going to get an Oil cooler but after 4 new so3's + rego i have no bling bling left :P

There was a fair amount of meat left on those tyres?!?!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...