Jump to content
SAU Community

Recommended Posts

i've moved over to the US now and the next best thing on the roads over here to the Hummer H2 has got to be the G35 Skyline. it is farken sex on wheels.......nissan australia, you suck!!!!!!!!!!

I agree totally.

Some think it's ugly(fair enough each to their own) and looks too much like a 350Z.

But to me they are appealing and I'm waiting to get a V35 as soon as someone can comply one.

Look on this site gallery and forum for heaps of pics

http://g35driver.com/home/

The Hummer H1 is too milatary! the H2 is civilian and its soo tuff :( The H3 is even more civilian and less thirsty! my friend was telling me that he saw a H2 on the freeway (whilst it was at a standstill) and the owner was filling it up with petrol with a jerry can hahahaha...

i see them all the time, no pics as yet, but i'll try and take my camera out more often now. not many nice rides in Charleston, SC when i get up to NY it might be different, but there are plenty of trucks down here. also saw a turbo Z. front number plates are not necessary here.

never driven one, but going from the Z, they go well! :(

  • 2 weeks later...

I just got back from Canada, the G35 is very popular over there. I haven't really thought much of the pictures I've seen though my opinion has changed now that I have seen them in person. They rock. I would love one of the coupes. The do a 14 second quarter. Most I saw had brembo brakes and were luxurious. Same sort of price as the 350z so not super expensive.

Yes Nissan Australia does suck although we are lucky that we got the 200sx and 350z.

As an owner l can tell you they are great car's. As for the looks, it's a matter of personal tastes, but they are so much better in the flesh. l've covered over a 100k miles in a R33 and R34 and the v35 is just as much fun. For an extra £6k sterling you can fit a S/C (0-60 = 4.7sec with 320rwh) and rework the suspension and you will shock a stage 1 R. I hope you get them overthere soon and you will see exactly what I mean.

What I don't get is that me and other Japan residents have been saying the V35 Skyline was an excellent car (as opposed to the 'naysayers' on here - just by looking at pics ffs) for years and now suddenly it takes some dude to go to the US then post up "the G35 rawks yo!" then all you guys jump on the bandwagon...

Bovine poo poo.

  • 1 month later...
What I don't get is that me and other Japan residents have been saying the V35 Skyline was an excellent car (as opposed to the 'naysayers' on here - just by looking at pics ffs) for years and now suddenly it takes some dude to go to the US then post up "the G35 rawks yo!" then all you guys jump on the bandwagon...

Bovine poo poo.

oooh look at me!!!

rezz, just because you live in japan doesn't mean you hot poo poo...

lets get some facts straight first:

1. whats a "naysayer"

2. im a proud australian who has relocated to the US for 18 months, who has been an active sau member for quite some time. i've only been a "dude who's been in the states" for 2 months who has only bothered to post because i see soo many of them here compared to when i was in Oz and wanted a simple discussion.

3. the first time i ever really 'took notice' of the g35 was when i sat in one back in jan 2003 when doing TAS03. below is a picture i took of a mate i was with at the nissan gallery in Ginza.

Img_6111.jpg

looks, here i am taking a photo of my friend IN a G35....*gasp*

Img_6144.jpg

and here's another:

Img_6141.jpg

and heres another, though not very relevant:

Img_6161.jpg

wow, they even have nissan car models!

Img_6114.jpg

here we are all squeezed into a nissan micro car!

Img_6173.jpg

4. what is bovine poo poo?

5. stop thinking you're hot poo poo because you live in Japan.

6. this is a thread about the g35 why are you going off topic and talking about yourself?

regards,

franky (some dude in the US who apparently doesn't take notice of rezz in japan who knows everything about japanese cars and japanese fads and everything about japanese car cultures that no aussie, let alone some US dude, knows anything about or is 5 years behind who is nowhere near up to date with rezz and his japanese car culture )

;)

franks do they have super chillers over there?

hey dunc!

you can just call me some "US dude, yo" if you want ;)

i havent come across a super chiller yet, but i saw on "myth busters" that an esky full of ice and salt will get a warm beer very cold very quick ;):) :)

i guess thats what a super chiller is! Hahaha...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...