Jump to content
SAU Community

Recommended Posts

Of course it's a problem!

Try a search - this problem happens nearly every week.

It never fails to amaze me the negativity of some of the people in these forums. Its too much trouble to assist someone with an answer but its not too much trouble to send a DO A SEARCH post.

FYI I did a search and could find f**k all otherwise I wouldnt have posted at all .

Maybe Im not as computer orientated as others on the forum but as I said I did a search and found nothing to help me

Link to comment
https://www.sau.com.au/forums/topic/78211-4wd-light/#findComment-1432671
Share on other sites

I apologise for jumping on you, but it is a common question. I'll admit that the leaves a bit to be desired in its ability to home in on the key words.

But it never fails to amaze me that someone would question if a warning light indicated a problem. It's not so much a problem that you shouldn't drive the car (like an oil warning light), but it is an indication that the car won't behave as it is supposed to.

The usual answer is that you need to check the fluid level in the reservoir located in the rear RH corner of the boot (behind the side panel). Check the level with ignition "ON". But there may be some other cause that I have "no-eyed deer" how to diagnose and fix.

Link to comment
https://www.sau.com.au/forums/topic/78211-4wd-light/#findComment-1432740
Share on other sites

you can extract a code from the ecu by putting it in diagnostic mode.....you do this by earthing a wire on the diagnositic connector under the dash.....then the light will flash a certain amount of times....i put my money on a low voltage code....this is corrected by fitting a new battery......if you want to clear out the ecu memory,take the battery terminal off overnight

Link to comment
https://www.sau.com.au/forums/topic/78211-4wd-light/#findComment-1433574
Share on other sites

you can extract a code from the ecu by putting it in diagnostic mode.....you do this by earthing a wire on the diagnositic connector under the dash.....then the light will flash a certain amount of times....i put my money on a low voltage code....this is corrected by fitting a new battery......if you want to clear out the ecu memory,take the battery terminal off overnight

Funny you should say that because I recharged the battery about a week ago because it went flat because the car isnt a daily driver.

Link to comment
https://www.sau.com.au/forums/topic/78211-4wd-light/#findComment-1436881
Share on other sites

Most common problems have been covered above....if the 4wd light is on the ATESSA computer will be flashing the error code for you. Details of each error code are in the 32 gtr manual, not sure if they are identical on the 32.

Link to comment
https://www.sau.com.au/forums/topic/78211-4wd-light/#findComment-1437873
Share on other sites

Make sure the car is charging for one. Im sure if the car sits for weeks on end, without being started - it would only be a matter of time before a new battery get to the same level as your current battery.

Best thing I have seen to fix this is a 900milliamp trickle charger from k-mart, just leave it hooked up whilst your not running it. Will keep your battery happy and also will keep your alarm happy.

Cheers

Sumo

Link to comment
https://www.sau.com.au/forums/topic/78211-4wd-light/#findComment-1438312
Share on other sites

Funny you should say that because I recharged the battery about a week ago because it went flat because the car isnt a daily driver.

Oh for shame. GTR not the DD?

You must be busy Al as we haven't seen you about, and you haven't posted much.

Link to comment
https://www.sau.com.au/forums/topic/78211-4wd-light/#findComment-1438353
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...