Jump to content
SAU Community

Recommended Posts

I am checking out a few things for a friend and came across a car yard in Perth Auto Japan - my question is has anyone bought cars from them and what sort of quality are they the main reason for asking is that there prices are quiet good and I am a firm believer you get what you pay for....

When I compared there prices to say John Hughes there seems to be a big difference in cost

Link to comment
https://www.sau.com.au/forums/topic/78607-car-yards-and-car-quality/
Share on other sites

Tell them to check out Autoworx in Wangara, some very nice cars there & are pretty cheap at the moment too. With John Hughes, all of their cars are grade 4 I believe, they only have the top quality ones there.

Way too expensive though, I imported a car that probably would have been grade 4 for under 17k, and they sell slightly older cars than that for 6k more. Err, no thanks John ya twat.

I am checking out a few things for a friend and came across a car yard in Perth Auto Japan - my question is has anyone bought cars from them and what sort of quality are they the main reason for asking is that there prices are quiet good and I am a firm believer you get what you pay for....  

When I compared there prices to say John Hughes there seems to be a big difference in cost

John Hughes aside you get what you paid for at most dealers, if the dealer is a RAW you will always get a better price.

On any car over $10,000 ask for a auction report or get a RAC inspection on the car and especially the structural integrity as I see what come in at the docks and their can be a big difference.

I think auto japan and the place in leederville is overpriced, auto japan is just down the road and i check it out often. There's a couple of ca18 sils for over $10k, an 89 32 unlicenced for $12k.

If you want a 32 contact me :)

I bought my R33 from Down Under Autos on Oxford Street, Leederville, in Jan 2003. They were very good to deal with and gave me a good deal. I have continued to use them for service since and they have always looked after me. Both the guy at the yard and the guy at the service garage have always been happy to talk to me and answer my stupid questions. They are also quite prepared to recommend other places for work that they don't do. Of particular interest is that they are a licensed RAW and they are also an RAC registered dealer - which means that all of their cars get RAC checks and the RAC also checks out various aspects of their quality management.

I am sure there are other good ones around too, but I received good service from these guys and will definitely talk to them when I am looking for a replacement.

As for John Hughes, they were very slick salesman and had some nice cars. Their asking prices were high, but they were prepared to move. I reckon I could have got a reasonable deal off them, but they did not have a Series II when I was looking. Overal, I reckon they would have ended up about $2k - $3k higher. Whether you get any more for that difference is your own judgment.

Cheers. :P

I bought my R33 from Down Under Autos on Oxford Street, Leederville, in Jan 2003.  Both the guy at the yard and the guy at the service garage have always been happy to talk to me and answer my stupid questions. 

I am sure there are other good ones around too, but I received good service from these guys and will definitely talk to them when I am looking for a replacement.

Cheers.  :)

pfft thats when everything in the car u bought have no faults wats so ever, once something goes wrong (and get this, while still under warranty) the warranty covers and does f**k all!!! Thats the thing u gotta look out for with this place, their phucked up so call warranty. i.e. doesn't cover any leaks wats so ever let it be water or oil. :cuss:

but the guys at their service depot is alright like u said.

the warranty covers and does f**k all!!! Thats the thing u gotta look out for with this place, their phucked up so call warranty. i.e. doesn't cover any leaks wats so ever let it be water or oil.  :cuss:  

but the guys at their service depot is alright like u said.

Used car warranties never offer much protection, except against major mechanical failure. I am sure that you would have found the same with any used car yard. Persuading a customer who is convinced that they are covered, when in fact they are not, is a hard job. The measure of the yard is probably how well they deal with that and how prepared they are to give a little in the grey areas. But don't expect any used car yard to give away much - they are not reknowned for their charity work!

Cheers. :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...