Jump to content
SAU Community

car yards and car quality

chowetime

By chowetime,
in Western Australia

 Share

Recommended Posts

chowetime Enthusiast

chowetime

Posted
Posted

I am checking out a few things for a friend and came across a car yard in Perth Auto Japan - my question is has anyone bought cars from them and what sort of quality are they the main reason for asking is that there prices are quiet good and I am a firm believer you get what you pay for....

When I compared there prices to say John Hughes there seems to be a big difference in cost

Link to comment
https://www.sau.com.au/forums/topic/78607-car-yards-and-car-quality/
Share on other sites
ossie_21 Grand Master

ossie_21

Posted
Posted

Tell them to check out Autoworx in Wangara, some very nice cars there & are pretty cheap at the moment too. With John Hughes, all of their cars are grade 4 I believe, they only have the top quality ones there.

Way too expensive though, I imported a car that probably would have been grade 4 for under 17k, and they sell slightly older cars than that for 6k more. Err, no thanks John ya twat.

Guest

Guest

Posted
Posted
I am checking out a few things for a friend and came across a car yard in Perth Auto Japan - my question is has anyone bought cars from them and what sort of quality are they the main reason for asking is that there prices are quiet good and I am a firm believer you get what you pay for....  

When I compared there prices to say John Hughes there seems to be a big difference in cost

John Hughes aside you get what you paid for at most dealers, if the dealer is a RAW you will always get a better price.

On any car over $10,000 ask for a auction report or get a RAC inspection on the car and especially the structural integrity as I see what come in at the docks and their can be a big difference.

SR32 Rising Star

SR32

Posted
Posted

I think auto japan and the place in leederville is overpriced, auto japan is just down the road and i check it out often. There's a couple of ca18 sils for over $10k, an 89 32 unlicenced for $12k.

If you want a 32 contact me :)

MLCrisis Proficient

MLCrisis

Posted
Posted

I bought my R33 from Down Under Autos on Oxford Street, Leederville, in Jan 2003. They were very good to deal with and gave me a good deal. I have continued to use them for service since and they have always looked after me. Both the guy at the yard and the guy at the service garage have always been happy to talk to me and answer my stupid questions. They are also quite prepared to recommend other places for work that they don't do. Of particular interest is that they are a licensed RAW and they are also an RAC registered dealer - which means that all of their cars get RAC checks and the RAC also checks out various aspects of their quality management.

I am sure there are other good ones around too, but I received good service from these guys and will definitely talk to them when I am looking for a replacement.

As for John Hughes, they were very slick salesman and had some nice cars. Their asking prices were high, but they were prepared to move. I reckon I could have got a reasonable deal off them, but they did not have a Series II when I was looking. Overal, I reckon they would have ended up about $2k - $3k higher. Whether you get any more for that difference is your own judgment.

Cheers. :P

Chris_R32GT Rookie

Chris_R32GT

Posted
Posted
I bought my R33 from Down Under Autos on Oxford Street, Leederville, in Jan 2003.  Both the guy at the yard and the guy at the service garage have always been happy to talk to me and answer my stupid questions. 

I am sure there are other good ones around too, but I received good service from these guys and will definitely talk to them when I am looking for a replacement.

Cheers.  :)

pfft thats when everything in the car u bought have no faults wats so ever, once something goes wrong (and get this, while still under warranty) the warranty covers and does f**k all!!! Thats the thing u gotta look out for with this place, their phucked up so call warranty. i.e. doesn't cover any leaks wats so ever let it be water or oil. :cuss:

but the guys at their service depot is alright like u said.

MLCrisis Proficient

MLCrisis

Posted
Posted
the warranty covers and does f**k all!!! Thats the thing u gotta look out for with this place, their phucked up so call warranty. i.e. doesn't cover any leaks wats so ever let it be water or oil.  :cuss:  

but the guys at their service depot is alright like u said.

Used car warranties never offer much protection, except against major mechanical failure. I am sure that you would have found the same with any used car yard. Persuading a customer who is convinced that they are covered, when in fact they are not, is a hard job. The measure of the yard is probably how well they deal with that and how prepared they are to give a little in the grey areas. But don't expect any used car yard to give away much - they are not reknowned for their charity work!

Cheers. :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...