Jump to content
SAU Community

Recommended Posts

  • Replies 316
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I have just heard that the std VL turbo exhaust housing is almost identical to the VG30. T3 flange .63 a/r. I was told there was a slight differance, can't remember what, but would not effect the operation and mounting of the turbo. The flange on the dump pipe is different though, thus a custom dump whould be required.

Can someone in the know confirm/reject this theory, please?

Can the std VL housing be used, instead of the VG30?

Al, somebody said that to me too, but because the exhaust flange is different, it would make it a pain in the butt to get custom parts made up.

I can't confirm 100% though.

I have a guy who thinks he may have a couple for us though. VG30DET that is.

Great, I still would prefer the VG30det turbo exhaust housing.

But if i am unable to get one, i still have my 3.5" front pipe from my previous exhaust so all i need to do is get a dump pipe made up at my local exhaust shop, no big deal really :rofl:.

I picked mine up last night.. whahahah. :D

I managed to pick up a second handy one that apparently works (it feels and looks in good nick) for $300.

Thanks for not cutting my lunch Bass Junky. lol :(

I'm starting to doubt it is in fact a .81 or there abouts.

I've got a what was meant to be a .82 ARB GT35R machined housing. The GT35R housing is quite a bit bigger.

I'll have to find out how to measure the a/r and well... Measure it! ;)

Area to radius ratio is difficult to measure without sectioning (cutting up) the casting . These Hitachi housings never had the ARR size cast into them like Garrett's housings do . My impression looking at all three is RB20 type = miniscule

, RB25 type = small , VG30 type = huge . They really do have a lot of volute area inside them but remember they were designed to not choke a three litre V6 .

Cubes do you intent to run the complete VG30 turbo or some kind of bitza thing .

Cheers A .

Yeah, I agree with bass, for around the $2000 you get a turbo that puts you easily over the 250kw realistically and closer to 280. Is a bolt in situation, no modifications required for the fitting which is a big plus..And retains the stock look for any enquiring eyes. I know I was disappointed with my stock Hiflow struggling to get 240kw with the usual mods. I know for sure i was disappointed in my HKS cams, I thought they were a waste of money. But I think now with the VG30 Turbine housing the cams might be getting breathing space.  One last thought is that I feel i'm comming to the end of my quest for more power. SK's theory of 280kw max is good for me.  

Ian

what bolt on turbo can I get for 2k that makes 280rwkw ? and where can I get one ?

Bass Junky,

Are you sure they don't have any? I was in there only a few days ago and they had quite a few.

Your not confusing Option1 Garage with D1 Garage?

Discopotato,

I plan on initially running the as is VG30DET turbo, I'm keen to see how well it goes.

I know the RB20DET turbo makes 175rwkw on 9psi from 4400-4950rpm. Lets see how the vg30 differs. :)

I figure it should make 210rwkw on the dyno that I run on (rb25's make 190-200rwkw with rb25det turbo's and approx 11psi).

Should be interestering too see.

To be honest the exhaust a/r doesn't look much bigger than the rb20det turbo i'm running.

When I was up at D1 Garage I noticed there are 2 different types of rb20det turbo's, mine and a smaller looking one.

It has what looks like a smaller exhaust housing and a different designed compressor inlet, mine steps up to the compressor wheel where as the other smaller one has a smaller inlet steps down then steps back up to the compressor wheel.

This hi-flow sounds like the perfect upgrade here, and correct me if I am wrong in saying this but cant you get a Garrett GT3071r that has a T3 flange and a Option for a nissan .63 ar internally gated zuast housing capable of making 280 rwkw easy for about 1900-2100 dollars????

If I had to make a choice between a engineered turbo and a re-engineered turbo I know what I would go for...

Yes I know that its a RTA risk & you still have to run water & oil lines so add $250 and a heat shield.

I guess the following would be about right.

Turbo = free

High Flow = $1950 (max)

exhaust housing or busted turbo = $150

I assume the exhaust housing machining could be done when th turbo is high flowed so no additional price.

Total, $2100

I think

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...