Jump to content
SAU Community

Recommended Posts

Hey everyone,

Okay here is the story I have put a deposit on the skyline below, it got into Brisbane on Monday 29th June, the dealer selling it didn't know much about the car when it was in Japan, he told me it was a stock car (he deals with import trucks not sports cars). Below is what was advertised.

Nissan - Skyline R32 GTS-t

Fuel type: Petrol

Engine: 6 cylinder - 2.0L

Transmission: Manual

Intercooler Turbo

Year: 1990

Kms: 38,000

Condition: Immaculate

Colour: Black Metallic

Price: $16,990

Special: $14,990 Plus On Road Costs

Immaculate conditioned R32 Skyline coupe with all the trimmings.

VEHICLE FEATURES

Air Conditioning, Power Steering, Central locking, Electric Mirrors, Power Windows, Alloy Wheels.

We made a deal at $13,500 including ORC (12 month rego, new re-spray, service, compliance and new wheels). It has also had a RACQ Mechanical check a couple of days ago.

When he got it into Brisbane it had a few modifications:

- Adjustable Wastegate

- Exhaust

- Suspension

- Boost controller (under stereo)

- Air Filter

- Strut brace (don’t know what that is???)

What do you think??? Is it worth it???

Link to comment
https://www.sau.com.au/forums/topic/79100-what-do-you-think-r32-gts-t/
Share on other sites

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

ask the dealer for the compliance or auction certificate. Cause it sounds too cheap for what it is and has. Sometimes they weld two cars together front cut and back cut after somebody has just about written them off. But the auction certificate will tell whats happened to the car and if he says he doesnt have it or wasnt givin it then maybe they could be hiding something just be careful. Other than that you might have found a beaut car for a great price.

yeh.. 38 thou.. does seem very low for a 1990...

i bought mine with 69xxx - complete with log books and history and all the papers, paid a bit more but its all genuine.

interior seems to have little wear and tear (easily upholstered)

agree with r32skyline_89: ask him for all the papers/certificates and the history of the car, log books if available, etc

i'm with Beau - the volks look pretty good...

btw, strut brace is a metal (brace :mad:) which usually goes over the top of the engine bay from strut to strut, stiffens the chassis, can get rear ones too.

also looks like a GTST-M spec R32.. from thefront bar.. wonder if the re-spray would be a good one or a cheapie .. id dig into it to find out more sounds too cheap ! plus u got a electronic boost controller worth 400 bucks 2nd hand exhust around 700 2nd hand strut braces make a great handling improvement . worth around 100 2nd hand .. etc.. clearly you did score a bargin

nice car, but yeah the K's are definitely dodgy

38000K's over 15 years is only 2500k's per year which is just not feasible, especially a car that has been modified a little.

When you have a look tomorrow, look at the odometer and if the numbers do not line up EXACTLY then you can be sure that it has been wound back.

Doesn't mean it's a bad car though, I would however get a 100 thousand K service done it as soon as you get it.

gavin woods autotech know what they are on about.

one thing to remember is in japan a lot of cars arnt used as daily drivers, however what gordon said is correct, take the car and have a 100 tho service as soon as you get it, that way you know everything is up to date (ie timing belt, water pump ect) this kinda service isnt cheap, but its cheaper in the long run.

also get whatever mechanic to perform a compression test and a leakdown test on the engine, these 2 will tell you if there is anything majorly wrong with the engine iirc.

gavin woods autotech know what they are on about.

one thing to remember is in japan a lot of cars arnt used as daily drivers, however what gordon said is correct, take the car and have a 100 tho service as soon as you get it, that way you know everything is up to date (ie timing belt, water pump ect)  this kinda service isnt cheap, but its cheaper in the long run.

also get whatever mechanic to perform a compression test and a leakdown test on the engine, these 2 will tell you if there is anything majorly wrong with the engine iirc.

Thanks. Do you know of any good (doesn't really matter about the $$$) Mechanic on the GC, I have been ringing the Nissan Mech’s but they don’t really do the Imports so… If anyone has a Mechanic they would like to recommend that would be a big help.

one thing to remember is in japan a lot of cars arnt used as daily drivers, however what gordon said is correct

:D I didn't say that, chris did.. but I do agree with that too :(

I am sure gavin wood would give the car a good check over and thumbs up or down.. he has probably seeen more skylines than trees.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I just changed the timing belt on my RB25DET NEO and wanted to get some opinions. I’ve been super cautious, did a lot of research, and took my time. I’ve driven the car, and it runs fine. After warming it up, I revved it to 8000 RPM a few times—no issues, everything held up.   After the drive, I heard a noise that I think is either the clutch or possibly a tight accessory belt. It’s not constant, just comes and goes.   I took the timing cover off to double-check everything:   Belt is on properly, Tensioner is tight, Did the 90-degree twist test—belt isn’t too tight or too loose.     What still worries me is that I noticed the belt seems to sit a little toward the front edge of the gears, especially on the idler pulley. It even looks like it’s slightly coming off the edge there. Is that normal?   My old belt (5 years old, ~3,000 miles) also showed a bit of wear on that same edge, so maybe it’s just how it sits? I’m probably overthinking this, but since it’s my first time doing this on a NEO and the engine is forged, I really don’t want to mess anything up.   Also, I’m thinking of swapping to a clear front timing cover with the glass window. Would you recommend NITO or HPI? HPI looks reputable and their covers have 2.5mm thickness, but not sure if there’s a real difference between the two.   Any advice or reassurance would be much appreciated!
    • 40 grit sounds about right, to start. You make some decent cuts/damage in the coating with that, then rapdily scale up to maybe 80 and 120 for the bulk of the actual removal, then fine it off to 180 or 240 perhaps. No need to go any finer than that, and maybe no need to go even as fine as that. Wrap it on a big block and have at it. At least on the hub face.
    • Do the GKTech rear lower control arm mount relocation, and either alloy subframe inserts or very stiff subframe bushes. Traction is going to be at a premium!
    • Hello,   My name if Frederick, i'm 30 years old and I live in Belgium, Europe! I used to have a Nissan 370z daily but since I got a company car I turned that into my seattime driftcar. About 3 years ago I also wanted something older with more feel, so I got an R32 GTST with an rb26 engine. I am now getting the rb built to have around 800hp and it's close to being finished. I'm very excited for how it will drive and how driveable it will be! Regards, Fred!
    • Appreciate the insight! Talked to some local folks and they basically told me "it's not that deep." As long as the threading on the inside matches what's at the steering rack, everything else can be constructed-to-fit. There are full aftermarket kits I can use - probably better for my car overall since it's lowered.  Example: GKTech M14 Super Adjustable Inner Tie Rod Set - Nissan Skyline R32 R33 R33, 240SX, 300ZX, 350Z / Infiniti G35 M14I-TROD-2 gktM145-TROD gktM14I-TROD - Concept Z Performance (These can be packaged with their "high misalignment" tie rod ends).
×
×
  • Create New...