Jump to content
SAU Community

HID's/Xenons in 34's

ricknismo
 Share

Recommended Posts

Rhinorebel Grand Master

Rhinorebel

Posted
Posted
When complied I guess the things get butchered, has anyone replaced them?

How?

The reason the Xenons are removed is that in some of the 34's they are 'Automatically' adjusted whilst driving. In other models they have a manual switch which can be adjusted by the driver. These are allowed. The auto ones are not.

Dave

nismo34 Enthusiast

nismo34

Posted
Posted
Yeah thats what I mean, trying to find out how they were?

if there was transformers,ballasts,just bulbs? etc

I think most time they just change the HIDs with the sedan's non HID head lights.

But i have seen one where they open up the HIDs and take out the ballast and bulbs and replace with a normal driving light. BTW a proper compliance shop will distory all the HID things when compliancing. So to answer ur question, it prob be hard to find the original stuff in AUS. I think is cheaper if u just buy a new aftermarket HID kit and put in, is actually quite easy these days with the direct plug in type. ALSO the aftermarket ones is much much brighter then the stock ones.

dojobi Experienced

dojobi

Posted
Posted
I think most time they just change the HIDs with the sedan's non HID head lights.

But i have seen one where they open up the HIDs and take out the ballast and bulbs and replace with a normal driving light. BTW a proper compliance shop will distory all the HID things when compliancing. So to answer ur question, it prob be hard to find the original stuff in AUS. I think is cheaper if u just buy a new aftermarket HID kit and put in, is actually quite easy these days with the direct plug in type. ALSO the aftermarket ones is much much brighter then the stock ones.

I think the sedans have the same HIDs as the coupes. Both are available with halogens too. You really need the OEM lights as I've seen such terrible light patterns from kit upgrades on cars that weren't meant to have HIDs. I haven't seen one of these kits in an R34, but from what i've seen in Cefiros, Skylines and Supras, they look terrible and only give glare to oncoming traffic rather than decent lighting. I've got a pic somewhere on my computer of the light pattern from a kit. If I can find it I'll post it.

someonestolecc Grand Master

someonestolecc

Posted
Posted
but from what i've seen in Cefiros, Skylines and Supras, they look terrible and only give glare to oncoming traffic rather than decent lighting. I've got a pic somewhere on my computer of the light pattern from a kit. If I can find it I'll post it.

You should check mine out - they're crisp, non glaring and have a perfect cut off. There's some pics in the thread in my sig of both my car and my flatmate's 32.

If the r34 have projector lights like the r32/a31 then I would highly recommend the HID kits I'm organising a group buy for.

If they're "normal" looking lights (after the conversion back to halogen) then I would suspect they do glare and not cut off properly so I would suggest you find the OEM HID assembly and use that.

Good luck :P

wrxhoon Grand Master

wrxhoon

Posted
Posted

Ricnismo ,

The balasts are underneath the light but they should have been removed , usualy cut off , sometimes just unpluged and removed . They should have inscribed on the top black plastic "H1 12V 55W " , thats to indicate the type of globes they have in there .

All gtrs and gtts come with xenons as standard , some none turbos and some sedans come with halogens .

Gtr xenons are reflectors not projectors , series III r33 gtrs have projectors but the 34 xenons are brighter .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      RB20DE NEO smallbox clutch.

      By Duncan · Posted

      Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
×
×
  • Create New...