Jump to content
SAU Community

Recommended Posts

One of my hid lights seems to be...not HID.

The brightness & colour seems to be that of a normal globe.

On rare occasions or if you give it a kick, it will go into HID mode.

Wiring/bulb/any other suggestion? not too sure how the hid's work.

Also with the standard headlights, sometimes they'd both come on straight away, other times they needed to be switched on and off quite a few times. Shitty wiring or something?

Link to comment
https://www.sau.com.au/forums/topic/79539-headlight-problem-hid-standard/
Share on other sites

I find it strange you have 1 hid and 1 not hid.

What do you mean HID mode? What exactly happens?

HIDs should come on, mine start up like they flicker hard, then not as bright very quickly, then they take a little while to warm up all the while increasingly getting brighter. Are you sure it's doing this?

Can you find 2 ballasts?

As for them flickering if they're HID and they flicker on they might not be getting enough current.

One of my hid lights seems to be...not HID.  

The brightness & colour seems to be that of a normal globe.  

On rare occasions or if you give it a kick, it will go into HID mode.  

Wiring/bulb/any other suggestion? not too sure how the hid's work.  

Also with the standard headlights, sometimes they'd both come on straight away, other times they needed to be switched on and off quite a few times. Shitty wiring or something?

You will find you have a crook switch .

You will find you have a crook switch .

Yep - mine does that one light, then 3 seconds later, the other comes on.

Might be able to pull the switch apart and clean the contacts... or put up with it like me because i'm lazy ha!

I replaced my switch because of the exact same problem... with a genuine Nissan switch setting me back about A$150!

Justin , i can get it cheaper in Australia , i replaced one a couple of years ago in an r33 for about $75 .This is just for the light switch though not the complete assembly that would include the wiper switch as well

Someonestolecc-

hid lights are installed and they both have that box thingymagigy.

One of them refuses to light up and charge as bright as the other hid light.

The brightness of it looks as if it were a standard r32 headlight.

Can anyone point me to some tech info on the hid lights?

  • 8 months later...
Im having the same problem. My HID's are flickering and sometime seems to be brighter than others. Any ideas?

i have a similar problem. and i have found the problem.

at 1st i through it was an grounding issue so me and my dad cut the wirers and added some more hardcore ones and change the grounding point.. but this solved nothing

i think found it was the little red fuse box. i found that the fuses inside had become loses, so i push them in and it fix the problem for abit but now i have a issue with the wiring going into the red fuse box, if one of my headlights go out i just open the bonnet and move those wired just alittle bit and it comes back on straight away.

Also when one looks brighter than the other, its cuz its not getting full power, which i found in my case is the fuses and the wiring into the little fuse box.

I havn't fit the problem but what i will be doing is getting a better fuse box, one which clips the fuses in better and redoing the wiring into the fuse box

hope this can help your problem :)

here is a photo of the problem

dsc00118medium2ce.jpg

dsc00119medium2pk.jpg

I've almost find that the problem has increased due to my bumpy coilovers

cheers michael :)

p.s i have the same HID kit, as you damono

  • 3 weeks later...

Cheers Michael, your a legend, ive been having problems for ages with this and last night i was driving down the freeway with my hids constantly flickering so people thought i was flashing them. Finally my right one went out

Will check the fuse box/relays now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...