Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

ahh yes Troy, but in this pic you can clearly see it's a tomei boost controler: :P

IMG_0313.jpg

BTW the oil pressure is not particularly good. with oil temp below 30 degrees C I'd be expecting oil pressure to be up and above 6 bar at idle.

Also considering that there is no System Head-Unit visible, and theres an amp.........where would it be? In the dash?

Possibly in the glove box or mounted behind and to the side of the driver somehow. Since there's no rear seat there are a number of things that could be done given the extra space.

Good spot:)....so whats the hose coming out of the master cylinder:confused:

If you mean the 'pipe' that appears to come from underneath the reservoir and loop back behind it, then that's the lead for the reservoir level sensor......mine has that.

If you mean the 'pipe' that appears to come from underneath the reservoir and loop back behind it, then that's the lead for the reservoir level sensor......mine has that.

Arent they a little 2 pin lug and wire though? That looks to be a hydraulic fitting and hose of some description...dunno, its probably nothing out of th eordinary:)

You bought a GTR and you dont know what a numberplate bracket is! ncie one :D

LoL its obvious when you concentrate.......I posted those pics at like 1.30am last night....there, that's my excuse ;)

hmm, there are a few things I don't like about it, but they can be fixed :D

-The hand brake raises up way too high as Ronin said

-Roll Cage and Gauges usually/definately means it was a race car

-Dusty engine bay...has it been parked for a while?

whats the kays on the clock?

also it has a white dash, is that a 320 kit?, nice if it is

looks wikid in red

Yeah engine bay does look dusty, hand brake is def. poorly adjusted, maybe the bolt that holds it in place is loose? Yeah, def. has been raced, then again, so have a LOT of GTRs, especially the 89/90 ones that have come in......will probably need a bit of dosh to fix up some small bits n pieces.......i'm used to that though, as is the norm with GTR ownership.

Meanwhile we're on the topic of GTRs being raced, I think my current one was raced as well, it came with a fancy belt mechanism, and some E (exit?) sticker lol.....hmmmm just thinking out aloud. Anyway, heres a pic that has both the racing belt and the E sticker for those who are interested!

beltnesticker.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...