Jump to content
SAU Community

Recommended Posts

Guys,

I thought i'd run it by you all first. As of about 2 days ago my car started making funny noises/jolts when on boost.

Intermittantly, over about 4000rpm with foot on the go-fast pedal, the car would cough and splutter at various points in the rev range up until redline :)

almost like it's running out of fuel then finding it again. all intermittantly.....

do the symptoms described sound serious ? what could they be ?

TIA.

-Kym.

Link to comment
https://www.sau.com.au/forums/topic/8113-cough-engine-splutters-cough/
Share on other sites

Puckish,

lets not go there again!

Kym,

It could just be a injector is clogged or fuel pressure is not constant. I'd first try some injector cleaner, this should remove any deposits. I would have thought if it was a fuel pump problem then Barry would have picked it up on the dyno, so try the simple things first.

Have you bothered to regap your plugs? What gap are they at and what boost are you running?

See'ya:burnout:

Originally posted by GTS-t VSPEC

Barry would have picked it up on the dyno,  

He didn't find my still-continuing bubbling noise on boost, so it wouldn't suprise me if there's more problems.

I haven't regapped the plugs yet, that's booked in for tomorrow garage-ala-kym! I'll see what the plugs look like too.. maybe they need replacing. If that doesn't work I'll pick up some injector cleaner too :)

I'm still on standard boost by the way, haven't had any higher than 7psi *sniff*sniff*

Thx for the advice mate :cool:

oh yeh, and nice to put a face to the name also Paul!

Kym,

Gapping the plugs is easy, I have mine at .7mm that way you can be sure of a good spark. It does sound like the plugs may need replacing, if you use octane booster alot then they definately will.

Hope it goes well, keep us informed.

See'ya:burnout:

Kym

Your car looked sweet last night by the way.....

Your problem sounds like spark plugs.... I think they are ROOTED.... if you are running standard boost (7 psi) you do NOT have to regap them .... but it is advisable....

I dont think the problem is the gap.. i think they just might be stuffed....

if you use ocate booster they stuff really screws up your plugs......

just hope its not your coils ... they are a tendency for going shit on the RB motors......

Good luck Kym

Daniel

Originally posted by IMACUL8

Kym

Your car looked sweet last night by the way.....

Thanks buddy. LOVED your car too btw :) nice sounding BOV too... luvin it *drool*

After some body mods it'll look alot better (read: ultra-wide GTR wing, some skirts, and a S2 front bar (for FMIC))

Okay, so i'll be replacing the plugs tomorrow. That should help. I'll let you know how it all goes then :cool:

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...