Jump to content
SAU Community

Recommended Posts

I can get 5+ AP engineering power fc to suit R32 GTST for only $1150 delivered each.

This price doesnt include the hand controller.

If you require the hand controller then the total price is $1470 delivered.

**price change**

** with commander - $1380 delivered **

** without commander - 1040 delivered **

Come with 12 month warranty

Close date - 26/08/05

Payment due - 30/08/05

power%20fc.jpg

Buyers

1/ JL

2/ grandmasterb

3/

4/

5/

Edited by gR33ddy
Link to comment
https://www.sau.com.au/forums/topic/81906-r32-gtst-ap-power-fc-group-buy2/
Share on other sites

Have you found a cheaper deal? I havent :D

YES mate as i said in my email to you a while ago, i bought it without HC for $1000 and after talking to the supplier in Japan he said that if you guys were getting more than 10 peeps then thats the sort of price we should be getting for the AP Engineered Power FC.

Dont get me wrong the price you are offering is still very good, but you look at the difference with HC and then without and you can buy the HC for less than the difference in the GB if you know who to talk to.

My 2cents and im not dissing the GB on you Paul, as i said i still maybe keen for one without the HC but will see in time.

Cheers B

why would you buy another one if you've already got one? :confused:

Feel free to forward me your suppliers details and I'll be more than happy to bring the prices down.

:)

why would you buy another one if you've already got one? :confused:

Feel free to forward me your suppliers details and I'll be more than happy to bring the prices down.

:(

Had most of new gear stolen when my place got broken into Paul.

Therefore have to buy new gear and the Power FC happens to be one of those items.

The cheapest i have found without HC was $1050 delievered.

And thats normal price with no GB or anything <_<

I will see if he has no objections to me passing on his details and will forwards them onto you if you like???

Cheers B

Had most of new gear stolen when my place got broken into Paul.

Therefore have to buy new gear and the Power FC happens to be one of those items.

The cheapest i have found without HC was $1050 delievered.

And thats normal price with no GB or anything <_<

I will see if he has no objections to me passing on his details and will forwards them onto you if you like???

Cheers B

Ok, far enough.

If I can get offer these for a better price then I am sure the other interested buyers wont object.

:cheers:

Ok, far enough.

If I can get offer these for a better price then I am sure the other interested buyers wont object.

:)

Sent him an email and waiting to hear back from hom.

Let you know when i do ;)

Cheers B

Hey Guys,

I'm just curious in finding out what use the hand controller is to me??

If I buy a power fc, it will go to TillBrooks for installation and tuning, and I'm sure they have the products to be able to tune it and set it up, So what use would the hand controller be to me,

What functions does it display??

Do I need it??

Thanks for your helps guys.

Greg

Hey Guys,

I'm just curious in finding out what use the hand controller is to me??

If I buy a power fc, it will go to TillBrooks for installation and tuning, and I'm sure they have the products to be able to tune it and set it up, So what use would the hand controller be to me,

What functions does it display??

Do I need it??

Thanks for your helps guys.

Greg

Well assuming that the tuner your going to has a HC that will work on your unit then there is no real need for one.

The only time it is of use if you are tuing the car, other than that then you shouldn't really be playing around with it at all.

Cheers B

RAZOR32 - Your not too late. We dont have enough buyers at the moment for the group buy to go ahead.

I'll extend the finish time and see if we can pick up some more.

I guess anyone who is interested is waiting to see if we can get a better deal from grandmasterb's supplier.

RAZOR32 - Your not too late. We dont have enough buyers at the moment for the group buy to go ahead.

I'll extend the finish time and see if we can pick up some more.

I guess anyone who is interested is waiting to see if we can get a better deal from grandmasterb's supplier.

Ok guys the best i can get out of him for you all is $1040 without the HC which is still a lot less than most people are selling them for at the moment.

For all you that are interested in the Power FC with the HC i'll let you know ASAP as he's going to get back to me.

Pau llet me know what you want to do with this???

Cheers B :D

Ok guys the best i can get out of him for you all is $1040 without the HC which is still a lot less than most people are selling them for at the moment.

For all you that are interested in the Power FC with the HC i'll let you know ASAP as he's going to get back to me.

Pau llet me know what you want to do with this???

Cheers B :)

Ok so the best price i can get for all interested in Power FC with the HC would be $1380 :angry:

Cheers B

PS: PAUL i dont mean to bastardise your thread and feel free to have the posts deleted at anytime as im not trying to take over your GB, just trying to get the best prices for anyone and everyone, so if i am over stepping the mark then feel free to tell me ;)

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...