Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

I feel sorry for your diff.

there is going to be some serious torque there with the blower.

I havent read the thread but that looks like a VQ45. beutiful engine. That engine put out 206kw at standard in the "gentlemens agreement" it and it was under rated quite a lot.

I put in a guess at 320RWKW. ;)

Sweet mate looks really good. I am in talks with a mate at the moment about putting this model v8 or a lexus v8 in a r33 gtr and make the 4 wheel drive work and add a turbo. Whats the room like around the brake booster and the clutch master cylinder, and how much clearence is there around the exhuasts on both sides???

Good luck, its a bloody good idea!!!

No room for turbos thats for sure, not without body mods and i want this to be 100% street legal so im not going anywhere near that. I built a custom set of headers to turn down really sharp otherwise they would be sitting on the rails.

Be nice to see one in a GTR, lots and lots of fabrication... just not something im bothered with atm... Ive still got my GTR and im trying to get rid of it, it just doesnt interest me as much as this does.

Well it would be a big single turbo so both exhausts would kind of be like a log manifold facing foword, and then run the dump back under the passenger side engine mount or something aroun there. The biggest hastle for me as although its his car I will be doing all the work is cutting and shutting the sump to suit an engine that 1 has a totally different bolt pattern on the bottom then secondly is 2 cylinders shorter in length but wider!!!

My friend has a T-trim on a holden/isuzu rodeo 3.2 6cyl which was stroked to 3.7l and it pushes just over 400rwkw with 25psi.

But oh my god are those things damn loud at just idle!! The BOVs vent constantly and they scream. To the uninitiated it sounds like something is wrong from the loud grinding sound from the supercharger.

Somebody mentioned about your diff and torque. This rodeo had a new ford 9 inch and on its first pass (slicks) it smashed the living daylights out of it. Fitted up a strange full spool and next time out spat out an axle. Fitted in some moser axles and tried again and then it ripped the front of the diff housing off. This is with a six so yeah its gonna make some grunt with your package.

A t-trim at full noise on your motor in an R33 will run deep into the 11's if not a 10 if you can put it down.

I had considered putting a Q45 engine into a CPV35 Skyline but was told they weigh so much more than a VQ35DE engine.

Did you weigh the engine at all as I would be interested to know.

A V35 V8 non supercharged would be a nice daily driver i think.

Cheers

Messy engine WTF??? Looks factory to me?

R34 - wouldn't be much point throwing the V8 into the V35, yes it would push a bit more power, but you may as well just go with forced induction on the VQ35. Even if you're looking at a cost point of view, pick up a lower spec V35 without the VQ35 and throw in a late mode VQ25DET from a stagea :rant:

I like people doing something different like this. Well done. As for the power it will produce, any decent engine with forced induction will produce easily 100rwkW per litre...so it means 450rwkW for this sucker!!!!! GTR drivers start pissing your pants. As for if its a strong enough engine....coated pistons from the factory and 6 bolt bottom end. Thats stronger than your RB26!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...