Jump to content
SAU Community

Recommended Posts

i hae the following off an r33 gts-t series 1.5

* BRAND SPANKING NEW!!!!! tomei poncams 256degree bolt ons- $850!!!! SOLD!!!

* Power steering pump (brand new, fitment was attempted but it was for a series 1 not 2 engine - $100ono

* HKS adjustable ex cam gear ( new design, stronger, brand spanker)- $200ono (potential buyer) SOLD!!!!

*Car battery charger (2600mpa)- $20

* set of real metal checkerplate floor- $20

* yellow momo copy gear boot- $10

* red momo leather gear knob and boot(authentic)- $30

* Stock rb25det afm- $100ono

* Stock rb25det series 2 coils (6), perf.cond. -$200

parts available shortly.....

* apexi power fc with hand controller - $800ono SOLD!!!

* Bosche 044 fuel pump- $250ono SOLD!!!

* oil catch can- $80ono

* Sard 550cc injectors - $500 SOLD!!!!

* Turbosmart type 1 bov- $100

* Custom Tubular Trust exhaust manifold from an rb30- $600ono

* Standard plenum- $200ono

email at [email protected]

pm here or

0415035861

pics available on request

postage at buyers expense

cheers...ben.

Edited by 2BNVS
Link to comment
https://www.sau.com.au/forums/topic/83814-a-fair-few-parts-for-sale/
Share on other sites

i hae the following off an r33 gts-t series 1.5

Do you still have power steering pump?? if u do ill have it please .. contact me on [email protected] or Tex me on 0418520650

* BRAND SPANKING NEW!!!!! tomei poncams 256degree bolt ons- $850!!!!

* Power steering pump (brand new, fitment was attempted but it was for a series 1 not 2 engine - $100ono

* HKS adjustable ex cam gear ( new design, stronger, brand spanker)- $200ono

*Car battery charger (2600mpa)- $20

* set of real metal checkerplate floor- $20

* yellow momo copy gear boot- $10

* red momo leather gear knob and boot(authentic)- $30

parts available shortly.....

* apexi power fc with hand controller - $800ono

* Bosche 044 fuel pump- $250ono

* oil catch can- $80ono

* Sard 550cc injectors - $500

* Turbosmart type 1 bov- $100

* Custom Tubular trust exhaust manifold- $600ono

* Standard plenum- $200

email at [email protected]

pm here or

0415035861

pics available on request

postage at buyers expense

cheers...ben.

the power fc will work on series 1 and 2- im just waiting for a guy to get back to me about that so theres an interest already,

the series 2 have in built ignitors where as series 1 has external ignitors

ben...

yes but the powerFC model numbers are different for the series 1 and series 2 - i'm assuming it's because of the coil differences.

what i want to know is will your FC work on a series 1, or a series 2. it will not work properly on both, as the two are different.

oh k coz i was under the impression that an r33 rb25det power fc worked on either series 1 or 2

mine was on a series 2

if u can find out otherwise it would be appreciated as it will help my sale

ben...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...