Jump to content
SAU Community

Recommended Posts

to my above question

i asked a mate who has had a different sets of rims on hes 32 and reckons that the 18 x 9 +30 will be fine

he suggests a 215 front tyre and 225 rear, i dont mind having tyres stretched a tad and will suit the car nicely

sorry for all this newbie questions not the best with offsets and that

Cheers

u can make it fit, depending on the tyre you run up front and the offset all around.

18x9.5 +35 with 255/35 all round. Would that fit without needing to lip/flare the guards? Also, would that be the most suitable size tyre, or should I be looking at 235/40 or something?

18x9.5 +35 with 255/35 all round. Would that fit without needing to lip/flare the guards? Also, would that be the most suitable size tyre, or should I be looking at 235/40 or something?

235/40 would be a much better option for a daily driver, 255's will scrub on the guards and possibly on the suspension up front. 255's are overkill, especially up front, better of spending more a quality smaller tyre. also not 100% sure about 18x9.5 +35's fitting up front, id be worried about upper control arm clearance, saying that im not too sure how much clearance R33's have.

quick questioin

which would fit better to my sedan

18 x 8 +35 all round

or

18 x 9 +30 all round

car will be fair low as well, so might need liping?

Cheers

depends what tyres u run, if u run relative sizes for each width, for example a 215 on the 8" and a 235 on the 9", the 8" with the 215 will have more clearance both from suspension and guards. 9" will sit a lot more nicer and allow better sized tyres, and still fit as long as u long as u dont run over a 235-245 up front.

to my above question

i asked a mate who has had a different sets of rims on hes 32 and reckons that the 18 x 9 +30 will be fine

he suggests a 215 front tyre and 225 rear, i dont mind having tyres stretched a tad and will suit the car nicely

sorry for all this newbie questions not the best with offsets and that

Cheers

215 and 225 will be fine, but as i said u could get away with a 235 up front, and probably like a 255 up the rear if u really wanted.

  • 2 weeks later...

first id ask why u want to run 255's all round, u could get away with smaller tyres easily while maintaining the same traction. im not 100% sure how much inner clearance there is on a R33, but id suspect u couldnt go much over a +35 at the front, to be safe id probably go +30, even so ur looking at issues with guard clearance. id be going a quality 235 instead, will probably cost similar $$ and provide better steering response and clearance.

first id ask why u want to run 255's all round, u could get away with smaller tyres easily while maintaining the same traction. im not 100% sure how much inner clearance there is on a R33, but id suspect u couldnt go much over a +35 at the front, to be safe id probably go +30, even so ur looking at issues with guard clearance. id be going a quality 235 instead, will probably cost similar $$ and provide better steering response and clearance.

For circuit work, with slicks

For road rally work i am thinking 8F & 9R

  • 2 weeks later...

Hey I'm looking at buying some 20"x8" (yes i know 20s on a skyline is a bit of overkill, i want something that will really fill the guards though)

anyway, just wondering if they will fit

20x8

+42 offset

235/30/20 tyres all round

my cars lowered on adjusties, isn't slammed, sits at a nice level, bit lower than super low king springs

Cheers

and no they aren't bling bling chromies lol, they're dished black wheels

Edited by GTS4onP
Hey I'm looking at buying some 20"x8" (yes i know 20s on a skyline is a bit of overkill, i want something that will really fill the guards though)

anyway, just wondering if they will fit

20x8

+42 offset

235/30/20 tyres all round

my cars lowered on adjusties, isn't slammed, sits at a nice level, bit lower than super low king springs

Cheers

and no they aren't bling bling chromies lol, they're dished black wheels

doubt it, rear they will probably fit no worries, fronts i strongly doubt it, will most likely foul on the UCA's pretty bad.

i want something that will really fill the guards though)

20x8

+42 offset

:P:down::laugh:

Quick question, do you think 17x9 +20's all round with 225/40 tyres would be too much for a R32 GTST 2 door with stock guards at quite a low height (currently 17x7s all round, tyres in guards almost)?

Edited by Ceffy_SA
^^will sit very nice depending on camber, but u will need to roll the guards, no pulling or flaring needed.

Ok thanks that was the answer i was looking for, not my car but a friends, will be having the wheels fitted by Wheelworx this weekend, sill put pics up when its all done.

Any thoughts on R33 GTR rims (17x9) on a 32 GTSt?

I have a set and they fit fine with stretched 215/45/17 rubber. I am planning on using them as track wheels so I can run 235/40/17 RE55's all round and rotate them.

I'm expecting to need to flare the guards a bit but i don't mind that. Might even buy fibreglass front guards that are wider.

I'm a bit concerned about hitting the suspension. Has anyone had this combo before with wider width rubber?

thanks,

Russ

Wheel diameter = 18

Wheel width = 9.5

Wheel offset = +35, but with the 15 mm spacers this has changed. Can somone tell me what they are now? +20?

Tyre size = 235/45/18

Modifications to fit = 15mm bolt on spacers all round to clear the brakes + lipped and rolled guards.

post-43220-1216273660_thumb.jpg

Wheel offset = +35, but with the 15 mm spacers this has changed. Can somone tell me what they are now? +20?

Yeah 20 now. Further out is a smaller number. That's a pretty aggresive offset! Did you need the spacers to clear the suspension?

Any thoughts on R33 GTR rims (17x9) on a 32 GTSt?

I have a set and they fit fine with stretched 215/45/17 rubber. I am planning on using them as track wheels so I can run 235/40/17 RE55's all round and rotate them.

I'm expecting to need to flare the guards a bit but i don't mind that. Might even buy fibreglass front guards that are wider.

I'm a bit concerned about hitting the suspension. Has anyone had this combo before with wider width rubber?

thanks,

Russ

i ran 235/45's all day every day on R33 GTR rims, 17x9 +30 with a 235/45 is pretty much the limit for inner clearance, u wont need a flare to fit it in the guard, but ull need to roll the guard, which is something u need to do to fit any decent size wheel. depends how much camber u are running as well, but imo its perfect size for stock guards.

DSCN0042.jpg

Hi guys, as for me I have

Skyline model = R33

Wheel diameter = 18"

Wheel width = 8" front, 9.5'' rear

Wheel offset = 35

Tyre size = 235/45/18 front, 265/45/18 rear,

as for winter (here in Russia its a bit snowy :D ) I put on rear 245/45/18

post-53258-1216368120_thumb.jpg

post-53258-1216368212_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...