Jump to content
SAU Community

Recommended Posts

no you just said that they weren't based off manufacturers,

Did I?

....Whilst Australian Standards are developed in conjunction with manufacturers (along with engineers, industry professionals and international associations)...

where does it say that?

Look Fellas, I didn't come on here to argue fact versus fiction with you. I simply tried to provide some facts about what's legal and what's not, and as I have said numerous times, it's up to the individual to use those facts as they see fit. If like yourselves people choose to ignore the facts, then so be it. It's got nothing to do with me and as Braddd has pointed out it's up to the police to enforce them. However we have already proven that bogus advice has already cost one user alr33x a defect, so where's the harm in clearing up the confusion? I'm sure if he knew the legalities before fitting said tyres he might not have done it.

I never said a stretched tyre is unsafe....

I never said don't do it....

I'm still trying to figure out what you are arguing about here...how can people make an educated decision if they don't have both sides of the story?

Facts do not cease to exist because they are ignored.

Edited by thewheeldeal.com.au

i made a statement that the ADR's didnt carry any merit of their own (them doing individual testing themselves), you said that was true, from this we deduce that you think that ADR's are based off them doing their own testing.

bigger turbo, fuel system, computer, fmic, steel induction etc etc etc, i'd be glad if i only copped a defect for tyre size :ninja:

and dont say that it'd get me pulled over and then checked, as we all know coppers love to pull over skylines no matter what the wheel/tyre situation anyway

hey guys just wondering... i have a r34 gtt and want to know what size rims i can get without any modifications. i got a quote from work and they seem to think i can have 18x9 front and 18x10 back. didnt say anythink about offset. offset and tyre sizes would be a big help thanks. also whats the biggest i can go legally??

Edited by pplatr34

also still running stock suspention and i dont mind rolling my rear gaurds alil. after reading alot of these pages i think rear: 18x10 + 18

front: 18x9 + 12 should do the job.

Edited by pplatr34
also still running stock suspention and i dont mind rolling my rear gaurds alil. after reading alot of these pages i think rear: 18x10 + 18

front: 18x9 + 12 should do the job.

Pretty agressive. Should look good. You'll have to roll front and rear I believe.

ok so ive been told that theres abit involed in fitting those size on. can any1 reccomened the offset for work xd9z to fit snug in stock gaurds?

Edited by pplatr34

Just copy and fill in the table;

Skyline model = r32 gts-t 4door

Wheel diameter = 18"

Wheel width = 8.5 front / 9.5 rear

Wheel offset = +30 front / +35 rear

Tyre size = 225/40 front / 245/40 rear

Modifications to fit = Need low profile tyres to clear the control arms up front. Rears stick out about 2cm past guards so need stretch fit tyres

Hi guys,

can anyone tell me the offset that would fit flush with the 33 guards

front 18x8.5

rear 18x9.5

been reading this topic but just cant find it, always slightly in or out

that shit is useless without offsets mate...

find out the offsets first

is that all i have to do???????

Sorry I don't know 34s that well. It'll look good. Just might cost a bit to make them fit. I think guards will need bit of a pump.

I know a mate is running 18x10's +22 on his 34 and they fit ok with 235's front and back so going by that you'll be 4mm wider at the back and about 2mm further in at the front if you use a 235 tyre. Or maybe he has 245's.... I can't remember. Anyway his didn't scrub.

I'd go 235's front and 245's at back and make em fit.

need some help here guys.

17 x 8 up front

17x 9 on rear, +44 offset, kinda homo atm as you can see in pic below

ill be pickin up four 25mm bolt on spacers tomoz and see how it looks....

keepin in mind this is track only, thinkin maybe a slight flare on teh guard as well...

Image041.jpg

wondering if any one knows what size spacers ill need if i want to fill the guards on my r32 gts-t running r34 gt-t stockies, i want the wheels to sit further out to look abit more agressive as i like the look of the r32 wheels.

cheers.

The question of what wheel size fits what Skyline comes up so often I though this might be a good place to post your own wheel dimensions.

Just copy and fill in the table;

Skyline model =

Wheel diameter =

Wheel width =

Wheel offset =

Tyre size =

Modifications to fit =

One of mine as an example;

Skyline model = R32GTST

Wheel diameter = 17"

Wheel width = 8"

Wheel offset = 35

Tyre size = 245/45/17

Modifications to fit = remove the front inner plastic guards, roll rear lip slightly.

:) cheers :)

got pictures of how the wheels sit?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...