Jump to content
SAU Community

Recommended Posts

how would 17x10 38 R with 265/40

17x9 22 F with 235/40 fit?? any scrub on cornering?

would I have better handling and comfort over the bumps with this combo compared to 18x9.5 15 with 235s all round? I have rolled guards and want it to be flush or close to it.

Edited by AngryRB

hey guys.

at first sorry for my bad english...i´m from germany and have a question about new rims on my r33gtst...

will 8,75j x18 et20 front and

9,75j x 18 et20 rear

fit? tires are 235/40r18 front and rear.

or should i take the rims et35 in the front?

i only want to roll the fender on the inside ( in germany we say "bördeln" )....but dont want to pull the wheel housing...

http://www.japshop.co.uk/acatalog/XXR-527-18-INCH-ALLOYS.html%C2'>

greets from germany..and i hope you can understand me... ( where do i find the thread about introducing me ? )

hey guys.

at first sorry for my bad english...i´m from germany and have a question about new rims on my r33gtst...

will 8,75j x18 et20 front and

9,75j x 18 et20 rear

fit? tires are 235/40r18 front and rear.

or should i take the rims et35 in the front?

i only want to roll the fender on the inside ( in germany we say "bördeln" )....but dont want to pull the wheel housing...

greets from germany..and i hope you can understand me... ( where do i find the thread about introducing me ? )

Yes, 18x8.75+20 front and 18x9.75+20 rear will fit. It will be nicely inside the guards, only a roll is neccesary. Roll is where the sharp edge on the inside of the guard is pushed up on itself to create a soft curve - so it doesn't chew your tyres.

Pump means pulling your guard out to fit bigger rims or larger offset. I don't think you want this.

Yes, 18x8.75+20 front and 18x9.75+20 rear will fit. It will be nicely inside the guards, only a roll is neccesary. Roll is where the sharp edge on the inside of the guard is pushed up on itself to create a soft curve - so it doesn't chew your tyres.

Pump means pulling your guard out to fit bigger rims or larger offset. I don't think you want this.

thanks for your answer...you understood me :)

how safe is it, that it will fit without scratching and so on?

hmm i cant edit...

anyone running 18x10 +15 at rear / 18x9.5 +15 at front on er34 gtt? will i need spacers?

On a 33? I ran 9.5 +13 and 10+11-15 can't remember. Just depends on rim style for front brake clearance

On a 33? I ran 9.5 +13 and 10+11-15 can't remember. Just depends on rim style for front brake clearance

yeah, similar but 34 got more clearance i think, what rubber r u running on? 235? or 225? lol

Edited by enka

Hi peeps, the opportunity has come up to obtain a set of cheap 18s, 18x8 +35 for the front and 18x9 +33 for the rear

They will be fitted to my mrs r32 gtst, will this offset be too weak and sit too far in the guards? Thanks

whats the widest tyre you can go for a 17x10 38offset on r33 with rolled guards, im after maximum traction..

I have 18x10 +38 with 265s. Easy fit with rolled guards. Was thinking of trying to squeeze 285s in there when next due for tyres if I still have these rims.

post-83859-0-74875800-1392158665_thumb.jpg

Edit: stuffed up pic attachment...

Edited by M@&k

whats the widest tyre you can go for a 17x10 38offset on r33 with rolled guards, im after maximum traction..

depends how low, how much roll/flare, how stiff etc

i'd say 265 will be the limit unless you really push the guards.

pump the arches and 285 wuld be possible

flare and the sky's the limit

Hey guys looking at getting a genuine set of nissan wheels but I know I'll have trouble with the offset, I want to know if it's worth getting, any and all help is appreciated.

Vehicle: R33 series 2 GTST four door

Rims: 19x8.5 +50

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...