Jump to content
SAU Community

Recommended Posts

easy question...

have a 32gtst.

going front GTR gaurds and some sort of over fender on the rear before paint.

wanting XD9s again.

So biggest XD9 on the rear is 18 x 10 +18 i think?

So thats the rear.

What can i get under the GTR ( in XD9 Sizing ) front guards and keep the same look of dish front and back and no hang out the guard?

cheers so 18 x 10 +18 will fit without a hassle? only want to lip the guards but dont want to pull them etc and dont want poke

Well load's of people run them on actual GTR's sooooooo.... :P

Hey guys, I'm new to the site so forgive me if I don't know what I'm on about.. I've got a 1996 Series 2 r33 and I've currently got 17's on it. I'm wanting to buy some XXR527's and increase it to 18". Question is, what's the best fitment (offset etc) I was told 18 x 9 +30 would fit best?

Hey guys, I'm new to the site so forgive me if I don't know what I'm on about.. I've got a 1996 Series 2 r33 and I've currently got 17's on it. I'm wanting to buy some XXR527's and increase it to 18". Question is, what's the best fitment (offset etc) I was told 18 x 9 +30 would fit best?

Go through the thread, look at what people have used. Though 9.75+30 would be a safe but aggressive fitment.

Visually the difference between the 8.75 and 9.75 may be the amount of dish, but we are talking minor differences.

  • 3 weeks later...

Hey guys

Im looking at rims for my 32 gtst.

The rear has over fenders so not worried about fitment as far as poking out of standard gtst guards but more about brake and inner clearance. But would like them to fit front standard guards....... Although may go gtr fronts to

My options are

work 11 R

18 x 9.5 +12 all round

Work DR9

18 x 9.5 +23

18 x 10.5 +23

Work T7R

18 x 9.5 +22

18 x 10.5 +22

Will these have any fitment hitting struts brakes etc etc?

also any one have any pics of any of these wheels in these specs?

thanks.. im just unsure if ill go wider front guards to at the mo.

so the smaller rims i have listed are for the fronts with standard rolled and slight flared gtst guards...

just making sure they wont foul the suspension and brakes etc etc

sorry, meant to say callipers

I ran 9.5+12 all round. fronts needed a roll/pull and liners removed etc. easy easy fit

probably 15mm poke

poke on r32 gtst guards? front or rear?

Edited by Adz2332
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...