Jump to content
SAU Community

Recommended Posts

  • Replies 166
  • Created
  • Last Reply

Top Posters In This Topic

Hey guys one question.

You're using a 550hp (approx) turbo and only aiming for about 250rwkw? Won't this be running the turbo quite a bit below its' efficiency range?

If you wanted 250rwkw, wouldn't a GT-RS have been a better option due to the fact that it will be far more responsive?

A 550hp turbo should be good for towards 300rwkw.

Yeah, I am aiming for 290 to 300rwkw, shouldn't be a problem.

hey guys so happy, i started my car today, it kicked over after a small tune of Power FC, just put in a small tune to get it started and drive it to the exhaust place so that the dump can be made up, once that is done i should have my car 2 days later, the tuner will need two days, for a cold start...

im so excited i cant wait!!!!!

hey guys so happy, i started my car today, it kicked over after a small tune of Power FC, just put in a small tune to get it started and drive it to the exhaust place so that the dump can be made up, once that is done i should have my car 2 days later, the tuner will need two days, for a cold start...

im so excited i cant wait!!!!!

Keep us informed - love to see a dyno sheet!

Cheers - take it easy until you get use to it!

yeh i know everyone is telling me be careful bla bla, but hey im not stupid... i dont wanna reck wat took a lot of blood sweat and tears to build, Arup dont worry ull be seeing it soon, ill let ya drive it so u can want it, LOL...

You're letting someone else drive your car?!?!? You're crazy! :)

Just kidding...look forward to seeing those results.

On a more serious note, I know you low mounted your turbo mass_iv, but for the rest of the guys who are doing this upgrade, did you also low mount the turbo? I had originally planned on using a low mount manifold, but have also seen some nice high mount set ups and I'm curious if there's any particular benefit to doing either...

i would go for the high mount if i was going to do this again, as it would have been heaps easier. the only reason i didnt high mount it was because i was using an internally gated turbo, also the cost's of a new manifold were a little too much for me at the moment.

ECR033, did u find someone to do the work for you? if ur looking at somewhere pm me and i can give my mates at MRT a call and get a quote for you, just tell me wat work needs to be done and wat parts u have.....

Low mount is more EPA friendly and the install is cheaper.

You're letting someone else drive your car?!?!? You're crazy! :)

Just kidding...look forward to seeing those results.

On a more serious note, I know you low mounted your turbo mass_iv, but for the rest of the guys who are doing this upgrade, did you also low mount the turbo? I had originally planned on using a low mount manifold, but have also seen some nice high mount set ups and I'm curious if there's any particular benefit to doing either...

yeh i know everyone is telling me be careful bla bla, but hey im not stupid... i dont wanna reck wat took a lot of blood sweat and tears to build, Arup dont worry ull be seeing it soon, ill let ya drive it so u can want it, LOL...

lol

dammit!!!!!!!!!!!!!!!

u better watch out, when ur not looking your gt30 may go missing, replaced with a stock turbo :)

Hey mate I'm not sure if anyone mentioned a clutch upgrade.

My clutch was getting a little weak when I sent my car away to be "modded to the sh!thouse".

What this meant was that when I picked it up, the damn thing would just slip and I didn't get to see what the 240rwkw actually felt like. It was a big downer and 2 hours later before I even made it home it had died completely and I had to get the car towed.

A week later I got it back, although my stepdad picked it up for me cause I was at work so he got the first ride.

Funny thing was, he told my mum that he thought it felt no faster than before but not to tell me he said that (she told me anyway :)). I'm doubting he even hit full boost. Anyone should be able to differentiate between 140rwkw and 240rwkw. And I sure as hell could tell the difference.

yeh i know bout that mate, i just recently changed my clutch, ive got a heavy duty exedy clutch, although my mechanic thinks it wont last more then a month, but it should handle it for a while, ill prob go for a puk clutch or a brassy, i used to have one in there but didnt think id need it...

by the way that would suk if i wasnt the first to drive my just moded line...LOL

this has got me thinking guys, anyone know of a good clutch to handle about 250rwkw, i currently have an exedy heavy duty sports clutch, but i dunno if its trong enough, my mate has a wrx 2.5L pushing about 320awkw, and has the same clutch as me, but he rekons its only going to last him 2 weeks, as he is only using it to run his engine in...

im not sure if mine will handle 250rwkw, but i dont really wanna go for a puk or brass button clutch... any thoughts?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...