Jump to content
SAU Community

Dr30 Seatbelts..help!

NeoLokie
 Share

Recommended Posts

Adam_RSX Proficient

Adam_RSX

Posted
Posted

Front or back?

For the front I used a pair of the Clippan general fit retractables.

Rear is a lot harder, for rego I needed to get brackets made up that would support the retracting bit on the rear shelf, keep it far enough forward that it would fit under the window, far enough back that it wouldnt foul on the seatback and be anchored securely on the underside of the shelf (which isnt flat if memory serves me right. I did this by ripping out the rear seats and carpeting the back instead, and making up a carpeted solid panel to cover the ski portal

NeoLokie Enthusiast

NeoLokie

Posted
  • Author
Posted

Front! Don't suppose you have the part number for those front jobs do you?

Did they bolt in ok or anything need moddin?g? My back ones aren't retractable so it doesn't matter really.

Front or back?

For the front I used a pair of the Clippan general fit retractables.

Rear is a lot harder, for rego I needed to get brackets made up that would support the retracting bit on the rear shelf, keep it far enough forward that it would fit under the window, far enough back that it wouldnt foul on the seatback and be anchored securely on the underside of the shelf (which isnt flat if memory serves me right.  I did this by ripping out the rear seats and carpeting the back instead, and making up a carpeted solid panel to cover the ski portal

rsx84 Veteran

rsx84

Posted
Posted

i went to a wrecker and got ones from a MR30 aus spec car for the front $10 and they were black, just make shaw you get the whole lot, the belt and the clip... the rear i have to get the bracket made up.. i took out the parcel shelf to find the old belts bolted to the strut tops????

0HR-30T Rising Star

0HR-30T

Posted
Posted (edited)

The ones I got for the fron tof my HR30 coupe were:

"Teh dropLink"

I went to a seatbelt business though,not Repco,etc. One thing I was a bit dissapointed about,the drop link wasn't quite as long as the originals,but liveable. Don't reuse the original drop links!!!! You will get kicked right up the arse if anyone discovers the belts have been restitched!

Edited by 0HR-30T
0HR-30T Rising Star

0HR-30T

Posted
Posted
Just went and looked, I think I got the bit that anchors by the seat and threaded that through, then the buckle bit I put the plastic bit in first and wiggled it till it came through.  I'll take a photo later, my battery is dead atm

I'd be interested to know how you did it Adam. I looked at trying to use to originals in my HR,but it wasn't going to work without cutting the belt.Bit late for me now,but just for interest's sake :)

Boof Mentor

Boof

Posted
Posted

Adam : Can you post some more photo's of your seat belts down the bottom where they bolt into the car please?? I've gotta start looking at replacing my belts in my car, but mine go in behind the trim if i remember rightly where your's appears not to???? Cheers mate :D

0HR-30T Rising Star

0HR-30T

Posted
Posted

Boof,I think you'll find the reel is behind the quater trim.The blade part bolted to the inner sill in the pic there is the other end of the belt.

Adam.My buckles must've been bigger than the ones you have,as there was no way I could've fed them through th drop link as you've done...

Boof Mentor

Boof

Posted
Posted
Boof,I think you'll find the reel is behind the quater trim.The blade part bolted to the inner sill in the pic there is the other end of the belt.

Adam.My buckles must've been bigger than the ones you have,as there was no way I could've fed them through th drop link as you've done...

Yeah thats right that part, but how in the hell are you going to feed them through the drop link?? Thats the bit i don't get!! Unless you can buy belts that have been fed through that drop link already???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Kelford 246-A2. 262in/272ex. 
    • Adam_ECR33
      Hello sau 👋

      By Adam_ECR33 · Posted

      Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • r32-25t
      Why am I hitting a power wall with my stroked RB25?

      By r32-25t · Posted

      When you say your cams are 272/262 is that 272in and 262ex?
    • Kinkstaah
      Nismo GT Pro LSD configurations

      By Kinkstaah · Posted

      We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...