Jump to content
SAU Community

Recommended Posts

I just had my car tuned...

R33 S1.5

Trust Front Mount

Full Exhaust

Nismo Fuel Pump

HKS 2535

PFC

At 14psi it pulled 244rwkw and is amazing to drive!!!

My new best friend will be the local servo i think!

I thought it would have terrible traction with the crap 326's but it doesnt! it actually pulls very hard with fantastic grip in a straight line. Of course its quiet easy to smoke the tyres through 2nd but the power delivery is so smooth it usually just grabs and goes!!!

I would recommend this setup to anyone for street use! more power everywhere!!!

Cheers!

Edited by silva33
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/
Share on other sites

Ill have to take a photo of the graph with my phone and post it up...

INASNT; i bought the Apexi N1 off your friend and had them install it yesterday....

It is pretty loud but im sure ill get used to it...

Only mods are those posted... Stock injectors, no FPR or Z32.. max knock was around 30 on the PFC.. i dunno about the max duty of the injectors, i forgot to ask..

I was told it was making about 150ish rwkw by 3000 rpm and max power at about 6,500 rpm. (ill have to check it on the dyno graph though)

boost held to 13psi (from 14psi) till redline which i was not expecting..

Edited by silva33
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1539896
Share on other sites

it did cost u big bucks??? hahaha

not really...

in this case, you get what you pay for... if you saw how stock my car looks you would know what i mean and considering i have been burnt in the past by previous tuners im more than happy to pay a little more for the service and quality...

Edited by silva33
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1539943
Share on other sites

i just got my power fc tuned with my 2535 bolted up. Ended up with 231.1rwkw at 13-14psi. i do have a z32 afm and a nismo fpr and i'm very happy with the results. max knock is 11 and injectors get to max duty of 84% as far as ive seen. Like silvar33 my exhaust is a little restrictive. My tune feels very strong on boost but safe. Chasers tuned the car and they said on other dynos it might squeeze out a few more kw's but im happy with the performance of the car.

For those people who believe that a HKS turbo is a waste of money im happy to take them for a drive and show them the difference. No comparison compared to standard

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540132
Share on other sites

Sounds good reflex..

It would be good to compare the two cars it see how the tunes are different becuase if anything yours should be smoother than mine with the Z32 AFM

yeah mine is really smooth, i thought it be a bit laggy but its pretty good. im making full boost at 3000-3200rpm. oh yeah my traction issues arent to bad, got brand new tyres tho.

ill put up my graph tommorrow arvo, there isnt any significant dips in my curve and theres no spiking

Edited by reflex
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540546
Share on other sites

i just got my power fc tuned with my 2535 bolted up. Ended up with 231.1rwkw at 13-14psi. i do have a z32 afm and a nismo fpr and i'm very happy with the results. max knock is 11 and injectors get to max duty of 84% as far as ive seen. Like silvar33 my exhaust is a little restrictive. My tune feels very strong on boost but safe. Chasers tuned the car and they said on other dynos it might squeeze out a few more kw's but im happy with the performance of the car.

For those people who believe that a HKS turbo is a waste of money im happy to take them for a drive and show them the difference. No comparison compared to standard

hi reflex,

what injectors are you using?

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540667
Share on other sites

this is what ive come up with.

i bought my series 1 r33 18 months ago with basics

-3 inch exhaust

-boost controller

-pod filter

-rims

-bov

-fuel pump

-surge tank

-turbo timer

since then ive bought

-intercooler $400

-piping $250

-fpr $150

-power fc $1000

-hks 2535 $1300 exchange for standard

-z32 afm $220

-tuning $500

TOTAL - $3820

everything else is standard though

ive achieved 231 rwkw relatively cheaply, ive wasted plenty of money other crap like body kit, sound system, clearing defects, servicing etc.

for anyone out there looking to achieve strong, safe reliable results this is one option that you should look into.

this website is great for finding second hand parts in good condition

by the way my engine bay looks completely stock except for red rocker covers

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540706
Share on other sites

Dyno graph pls !

Sounds almost too good to be true dude ! with stock injectors no FPR or AFM !

He said he will post it up so give him a chance buddy <_<

Impressive power figure you and reflex have there.

Hope i get something similar out of the lil ol Rb20 of mine :P

Cheers B

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540717
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
×
×
  • Create New...