Jump to content
SAU Community

Recommended Posts

Don't panic.

I use regular unleaded in the jigger always. Rb20det, might not be making full power but it's certainly not pinging, that's what your right foot and the CAS are for.

I have found the regular starts much more easily than the PULP, just one touch and she's away. Same car on BP Ultimate has to crank away for quite a bit.

My only garage is a Matilda and their premium ain't too flash. Closest BP is 30mins away on the highway.

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1542634
Share on other sites

ping ping!

in response to grigor... hmmmmmmm let's see:

extra $5per tank of petrol vs. $600-800 second-hand engine + labour + inconvenience + possibility of new problems with that engine

hmmmmmmmmm i might just go any put in what is was designed for myself

of course, its your car so best of luck with it

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1542901
Share on other sites

I considered getting the car tuned for std. regular unleaded.

Then figured, $5 extra per tank.. bugger it. who cares.

I've considered throwing regular unleaded in it and watching the knock monitor to see how much of a difference it really makes. I would then pull ign. timing out until there is no longer knock.. It would be interestering. :D

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1543063
Share on other sites

Come on guys!!! There is a difference between ping and knock.

How do you think your car was tuned in the first place? You advance up the spark until in pings then back it off a few degrees.

I don't have access to top quality fuel here in the sticks so I sacrifice a bit of power by winding back the spark.

What I said was don't panic. One tank of fuel won't kill it IF you use your right foot sensibly until it's been diluted with premium.

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1543635
Share on other sites

my car pings going up hills with regular unleaded so i dont boost it at all on the rear occasions i have to use it.

if there is no other alternative to povo fuel i will just put in what i need to get to a servo that has PULP

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1544581
Share on other sites

You should be OK if you drive the car conservatively, and your tuner has given you a street tune that allows for margin of error. I wouldn't go do a track day or the drags with it, though.

If you're using a piggyback or light tuning the factory ECU, the knock sensor and the learning functions should compensate.

If you're using a full aftermarket ECU (like a PowerFC), most of them don't have the learning function. It won't retard timing etc if the engine pings.

Occasional pinging isn't that bad (cars are engineered to sustain that kind of load occasionally) but if your car is constantly pinging (audible or not) then you're just causing undue stress on your pistons.

I'd use 91 to limp home if I was stranded in the middle of nowhere and couldn't get octane booster, but I'd put in as little as possible and be keeping an eye on my revs and throttle load.

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1548389
Share on other sites

i did this in my stocky 33 and 32 gts-t's (only when i couldnt get premium).

I didnt have any problems. I didnt drive it hard.

If you need to tank up on 91 or 95 octane, please stay out of your boost range, otherwise your engine will knock if it is tuned for a specific fuel

Link to comment
https://www.sau.com.au/forums/topic/85036-what-happens-if/#findComment-1548685
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...