Jump to content
SAU Community

Recommended Posts

i just contact the seller today and i went to inspect his R34 M-spec Nur.its 100% general M-spec Nur.i checked everything i can and this is best GTR i seen.all the panel are line up and none of the panel been paint etc.under the car are straight.very good car.i offer the seller $145000 and i happy to pay $1000 deposite today,but he doesnt want to sell at my offer $145000.

i been looking to purschase one M-spec Nur.all the price i seen at auction in japan around 8.5m~8.8m for good clean clean car+5% japan local tax+fob+shpping/container/insurance when shipping the car from japan to australia/compliance/tax in Australia+luxury tax etc.it work out around $150000 by the time car get here.

i have seen one Nur spec in japan.sell around 6.5m(very cheap)but car has damaged on the chassis.thats why i believe good Nur-spec sell around 8m~9m in japan.

*i asked the seller in QLD for the M-spec Nur.i asked him why got R34GTT wheel.he said the compliance shop put them on to compliance.thats why he got it on.

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Justin , first i dont think you will buy a good NUR for 6 mil jpy , when i was there last year i offered 6.4 mil for one but they wouldn't go under 7 mil.
But Zele International (very reputable company) are selling that M-Spec NUR with 38,000 genuine km's with one owner and no accident history... for 6,000,000 yen.
Lets say you bought one for 6 mil , ( a bit rough or high k's ) thats about $73 k ( current rate 1$=82 jpy )

by the time you pay for shipping , import duty , gst ,luxury tax, compliance , rego and stamp duty you will be looking at about $110-115k .

So all up expenses to get it shipped to AU and complied and taxes paid is about $42,000?

How much is the 'luxury tax'? How much is compliance for SEVs?

Car purchase cost (in Japanese YEN) ¥6,000,000

Agent's fee in Japan (FOB charges) ¥80,000

Exchange rate (yen to AU$) 84.00

Car cost in Japan $72,381

LOCAL COSTS

Broker agency fee $1,000

Shipping $1,825

Shipping insurance (optional)

Import Duty (10% of FOB cost) $7,238

G.S.T. (10% of CIF value) $8,080

plus Luxury Car Tax $8,437

Compliance cost ~$5,000

Total cost before registration (AU$) $103,961

If the car costs 8mil Yen:

Enter the car cost (in Japanese YEN) ¥8,000,000

Agent's fee in Japan (FOB charges) ¥80,000

Exchange rate (yen to AU$) 84.00

Car cost in Japan $96,190

LOCAL COSTS

Our agency fee $1,000

Shipping $1,825

Shipping insurance (optional)

Import Duty (10% of FOB cost) $9,619

G.S.T. (10% of CIF value) $10,705

plus Luxury Car Tax (if applicable) $15,655

Compliance costs $5,000

Total cost before registration (AU$) $139,995

i just contact the seller today and i went to inspect his R34 M-spec Nur.its 100% general M-spec Nur.i checked everything i can and this is best GTR i seen.all the panel are line up and none of the panel been paint etc.under the car are straight.very good car.i offer the seller $145000 and i happy to pay $1000 deposite today,but he doesnt want to sell at my offer $145000.

i been looking to purschase one M-spec Nur.all the price i seen at auction in japan around 8.5m~8.8m for good clean clean car+5% japan local tax+fob+shpping/container/insurance when shipping the car from japan to australia/compliance/tax in Australia+luxury tax etc.it work out around $150000 by the time car get here.

i have seen one Nur spec in japan.sell around 6.5m(very cheap)but car has damaged on the chassis.thats why i believe good Nur-spec sell around 8m~9m in japan.

*i asked the seller in QLD for the M-spec Nur.i asked him why got R34GTT wheel.he said the compliance shop put them on to compliance.thats why he got it on.

ok

Once and for all.....

1. The car advertised for $200,000 in QLD is NOT a Genuine M Spec Nur... Nissan say that chassis was built as a V Spec 2 so therefore it is impossible that the car is a genuine M Spec Nur. There is no other proof required of a car's validity than running the Chassis Number through FAST.

2. The story about the GTT wheels is bullshit. The car has to be complied in factory condition. R34 GTR's had 18x9" Wheels standard with 245/45R 18 tyres so therefore the 17" GTT Wheels CANNOT be used to comply the car. If so, the compliance plate holder is in direct violation of his Licence and may have it revoked.

If you still think after all that, that the car is a Genuine M Spec Nur, then there is nothing else I can say or do to convince you otherwise.... I hope you enjoy being fooled.

Car purchase cost (in Japanese YEN)  ¥6,000,000 

 

Agent's fee in Japan (FOB charges)  ¥80,000 

 

Exchange rate (yen to AU$) 84.00

 

Car cost in Japan  $72,381 

 

LOCAL COSTS 

 

Broker agency fee  $1,000 

 

Shipping  $1,825 

 

Shipping insurance (optional) 

 

Import Duty  (10% of FOB cost)  $7,238 

 

G.S.T.  (10% of CIF value)  $8,080

plus Luxury Car Tax  $8,437 

Compliance cost                              ~$5,000

   

Total cost before registration (AU$)  $103,961

You do realise that Luxury Car Tax is 25% don't you? And you have to add shipping to the cost of the car before you add your duties and taxes. By your calculation, Luxury car tax comes to $22,447

Car Cost: $72,381 (which is optimistic on it's own as you wont get 84yen when you send money to Japan)

Shipping: $1,825

Combined Total: $74,206

Import Duty @ 10% on combined total: $7420.60

New Total: $81626.60

GST @ 10% on New Total: $8162.65

Total before Luxury Car Tax: $89,789.25

Luxury Car Tax @ 25%: $22,447.30

Therefore you're looking at roughly $120,000 before on roads.

You do realise that Luxury Car Tax is 25% don't you? And you have to add shipping to the cost of the car before you add your duties and taxes. By your calculation, Luxury car tax comes to $22,447

Car Cost: $72,381 (which is optimistic on it's own as you wont get 84yen when you send money to Japan)

Shipping: $1,825

Combined Total: $74,206

Import Duty @ 10% on combined total: $7420.60

New Total: $81626.60

GST @ 10% on New Total: $8162.65

Total before Luxury Car Tax: $89,789.25

Luxury Car Tax @ 25%: $22,447.30

Therefore you're looking at roughly $120,000 before on roads.

You are not right my friend , Charlie is closer to the mark , although he is out in a few thinks as well , he has under estimated afew things .

Shipping for starters if roll on roll off is only $1050 ( i wouldn't do it that way , container is the way to go on a car like that ) but when you add all the extras like customs clearence , q/tine and a steam clean it will be a little over $2000 + tow to steamclean + workshop .

The other thing is stamp duty in nsw is 3% for the first $46 k then 5% for the balance + normal rego and ctp .

As far ass compliance goes , i can get it done for $4000 ( even less ) but you have to add the cost of new tyres up to $2.5 k for a set + maybe new brake pads around $1k + removal of any aftermarket parts ( exhaust , pods ,etc ) so in reality it maybe a lot more than that too.

As for luxury tax , yea its 25% but only on the balance above $56 k not on the whole amount .

That car seems very cheap from my experience though , it should be around the 7-7.5 million jpy . If you look at the other cars they have at that site you will notice that is very cheap so i dont know if accident car or not .

When i was there last year if i found a good NUR M-SPEC for 6 mil i would have it here now , i can assure of that .

Edited by wrxhoon

Yes, I did omit a few things as I did it quickly, but the end price isn't that far off the calculations. wrxhoon as more of an exact idea as he actually went to Japan looking to buy a NUR. Either way, it will cost $150K+ for a NUR to be ready to drive on the road here (thanks to the govt's lovely taxes).

Personally, Instead of the $150K for a genuine NUR I would buy a regular R34 GTR that is already here for half the price, then spend the balance modifying the socks off the thing.

Hey Guys

The nissan FAST software does lie!! There are many cars that have not been recorded properly. I have seen this before.

I would assume that it would cost you more to convert a vspec-II to an M-spec Nur than to buy an M-spec Nur. That's assuming you could get a plate made perfectly, replace the bonnet without breaking the factory paint, convert the engine to an 24U, convert the interior, etc etc etc.

I have seen this car and I am sure it is an M-spec Nur. It's brand spanking new all over. All nuts and bolts are original and untouched. There must be an error in the software!

M

Edited by rb31

We DO check if the car is eligible for import before advertising you know... our company name isn't Pres.. never mind ;)

We are able to have a full mechanical inspection done on it if requested... just in case the owner happened to crash the car between picking it up and the 5500km he drove it. :)

Hey Guys

The nissan FAST software does lie!!  There are many cars that have not been recorded properly. I have seen this before.

I would assume that it would cost you more to convert a vspec-II to an M-spec Nur than to buy an M-spec Nur. That's assuming you could get a plate made perfectly, replace the bonnet without breaking the factory paint, convert the engine to an 24U, convert the interior, etc etc etc.

I have seen this car and I am sure it is an M-spec Nur. It's brand spanking new all over. All nuts and bolts are original and untouched. There must be an error in the software!

M

Even if it did lie about the model , the manufacture date isnt wrong.

Considering ALL Nur's were made in February 2002, This being a June model could only be a V Spec 2.

Nur's were not made in any other month. And that info comes direct from Nissan Japan

You may be looking at a libel suit here:

Out of curiosity I checked 4 other M-spec Nur chassis numbers with nissan today (they all came up V-spec-II)

4 V-spec-II Nur chassis numbers (they came up V-spec-II)

1 M-spec chassis number (came up V-spec-II)

There was no mention of M-spec or Nur.

I am told that all above cars are V-spec-II base category cars.

Good luck!

Even if it did lie about the model , the manufacture date isnt wrong.

Considering ALL Nur's were made in February 2002, This being a June model could only be a V Spec 2.

Nur's were not made in any other month. And that info comes direct from Nissan Japan

Edited by rb31

Whoever told you that they pumped out 250 M-spec Nurs and 750 V-spec-II Nurs in the month of Feb 02 and gave them a build date Feb 02 was having a lend of you.

You are still missing the point anyway. The FAST software is not complete for these cars. Check the chassis number on the one J-spec is advertising and I'll bet you it comes up as a V-spec-II depending on which version of the software you have.

Why would someone make a gold VIN plate from a V-spec-II VIN plate anyway. Quite pointless and a lot of effort for nothing. If you are that good at altering VIN plates then you may as well go the whole hog and make a new plate with an M-spec Nur chassis number. As I said, cost and logistics involved in making a V-spec-II into an M-spec Nur is extremely prohibitory. It's not hard to trace these cars back to original sale using the log books anyway.

I have seen this car and as a GTR enthusiast I can tell you it is genuine!

This is a collectors car and as far as I know the only one in AUS. Awesome car! I can't afford it but the person who can will be very happy.

Good luck!

what were the manufacture dates?

Edited by rb31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
×
×
  • Create New...