Jump to content
SAU Community

Recommended Posts

THIS IS WHAT IT SAYS ABOUT IT:

just want 2 know if any 1 has had anything 2 do with them..??

NISMO RACING CHARGING STABILIZER

NEW Racing Charging System

Fits all vehicle (Nismo special design for Nissan vehicles)

Benefits:

** Increase Torque ** Increase Fuel Economy ** Car Response Up

** Stable Idling ** Quick Engine Start ** Lesser Engine Noise

** Optimize Electrical Equipment performance

EBay again?

It's not genuine Nismo btw.

You're much better off spending (less than) that on some thick gauge wire upgrading your car's earthing points. See this thead for an example: http://www.skylinesaustralia.com/forums/in...topic=82677&hl=

That sounds like the HKS Circle Earth system. Autosalon did a review of the HKS one a while back and said for the money it wasn't worth it, and you'd be better off making one up yourself like raz0r$harP suggested. But it makes your engine bay look nice!

"Oh no it's the cops!"

"Worse, the police cops!"

That sounds like the HKS Circle Earth system. Autosalon did a review of the HKS one a while back and said for the money it wasn't worth it, and you'd be better off making one up yourself like raz0r$harP suggested. But it makes your engine bay look nice!

"Oh no it's the cops!"

"Worse, the police cops!"

Yah it is expensive !!!

But hey they are samples so I will try them out.

I have to admit that when I first put it on my car, it was idling much nicer. When I had the Metal Plus it did seem to get me more kms, then I tried the Torque one and kms per tank went down but my car does feel more torquey.

There are 3 other people trying various ones so we will see if we can come to a conclusion at the end.

Edited by beefy

Autosalon tested the HKS Circle Earth kit on 3 cars: a '94 Pulsar GTi, a series V RX7 and a Forrester XT. From memory they didn't notice any difference in the RX7, but in the Pulsar the owner said he thought it started easier on cold mornings, and his audio system sounded slightly better. In the Forrester, they did notice a gain of like 2kw's or so, but a slight drop in torque in the mid range. They also gave a step by step guide of how to make one yourself and what to buy, was very easy to make for fiddy bucks. They sound like a good idea in theory though, but I'd rather try to make my own for $50 than spend like $380 or so for a brand name one.

"Oh no it's the cops!"

"Worse, the police cops!"

well these 1's might be cheapees but for $70 they sound like they are worth a go 2 me..?? anyway i am after sound quality.. so it should help out there

The brand name ones are of questionable use: they probably make some difference of cars with poor earthing. The Pivot ones cost about $120.

Do you really think some Ebay knockoff with a fake brand name is going to be worth the hassle?

Ive had the Apexi one installed to help with Grounding and Idle issues in my car, they definitely help with the idle at the very least. Im not sure about all the other claims of more torque and better fuel economy. Seems like every mod in eBay says it improves fuel economy.

Is there specific point in the engine bay these wires are meant to go to?

Or is it just pick a metal spot on the engine and it'll be allright?

Ive been watching this topic for a while...

the actual power stabilisers have nothing to do with earthing, so in fact you are only comparing the quality of cables. Good quality cable from an electronics supplier will give you very similar earthing results. Another thing is that if the car already has a good earth, the kit will not provide a huge difference, but for older cars with poor earths it will be beneficial.

the powerstabiliser box smooths out votage fluctuations, which can help with starting and ICE. you may not even see an increase in votage tho.

in my opinion the PIVOT one is not worth it, they are relying on people to buy for the brand, I have done alot of research into these and have used similar systems on RC cars in the past.

I have built my own power stabiliser, for around $25 you can make a quite decent one that is compareable or the same as alot of commercial ones, the pivot one may be the best but imho it is not $75 better. I was planning on selling these but I did not want to supply a product that produced such a small performance gain, and testing on my car did not convincingly prove that it provided a noticable result

post-10983-1126324648.jpg

Edited by midnight

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...