Jump to content
SAU Community

Recommended Posts

Was a good turnout, alot of nice cars.

Whats the deal with that dude with the bluebird wagon claiming his car was wheelspinning, and bagging shauns dyno opperating...?? check his web site at this link

www.srt910.com

check the graphs and make up your own decision, you can see at peak torque the power dips and is all wavy from then on, also the torque curve turns quickly depicting what wheel spin would to a dyno graph.

This in its self I have no problem with, if you car wheel spins on the dyno so be it, it spun, but the part i do have a problem with if for someone to turn around and tell me there is 100% no posibility,no change ever that it wheel spun, and that my previous runs are "reading high" because of a higher ramp rate used, when after i found out what ramp rate was used,his comment is completly untrue.

So that is my opinion, you have your opinion.

Edited by SR910
  • Replies 294
  • Created
  • Last Reply

Top Posters In This Topic

Bagging Shaun and his dyno (on the open internet) because your not happy with the result you got (on a dyno day where he is pressed for time) doiing his best getting everyones car on and off is bad form in my opinion....

Sky30's car did wheelspin (you could see it and hear it), which Shaun had to restrap it down cos it got a little off line from memory...

Edited by Bl4cK32

Shaun is not bothered who won or lost, he doesn't

own any of the cars, and any that were there are built to the

owners wishes,He is just doing his job . To think he is worried about

your car winning SR910 shows how modest you are :) ,

Bloody dyno queens :angry:

Edited by S3_Girl

awesome day guys, thanks to everyone who put in their efforts. Just finished putting my footage to vcr, looks great but its not a digital camera so i can't post it up i'm afraid. Loved seeing sky30's car on there hoping that i can one day make that with my rb30.

Once the Rb30 is in my car i will definitely be taking the car to Shaun for everything dyno and otherwise related, very professional guy!

Good luck to everyone with their cars and keep modding so our next dyno day can be even bigger and better with more cars. I'm suggesting the end of summer once it cools down again but so that the weather is still nice like yesterday!

check the graphs and make up your own decision, you can see at peak torque the power dips and is all wavy from then on, also the torque curve turns quickly depicting what wheel spin would to a dyno graph.

This in its self I have no problem with, if you car wheel spins on the dyno so be it, it spun, but the part i do have a problem with if for someone to turn around and tell me there is 100% no posibility,no change ever that it wheel spun, and that my previous runs are "reading high" because of a higher ramp rate used, when after i found out what ramp rate was used,his comment is completly untrue.

So that is my opinion, you have your opinion.

The dyno graph should show large dips if the car is wheelspinning bad during a run. It is also easly seen and heard, but realy dont care if your car was or wasnt wheelspinnig on the dyno, or what power it made(all cars were run on the same dyno, the same day, by the same opperator). Baggin out shaun on the Net aint a good thing to do.

The dyno graph should show large dips if the car is wheelspinning bad during a run. It is also easly seen and heard, but realy dont care if your car was or wasnt wheelspinnig on the dyno, or what power it made(all cars were run on the same dyno, the same day, by the same opperator). Baggin out shaun on the Net aint a good thing to do.

So incidentily would it show smaller dips for less then "bad" wheel spin, consitering the losses were only in the region of 35+ kw? Just like it shows on the sheet.

I dont care if i "win or loose" a dyno comp, i dont care if my car wheel spins on a dyno, i do care about what a dyno operator says about integrity of the people i use to work on my car.

but that is ok, i didnt mention anything here, i didnt even mention the dyno operators name, your the one who brought it up here, i talk about my experiences and opinions on my website about my cars.

Have a nice day

more like he didnt want certain cars he has built with 2 more cylinders and another litre of displacment with the same turbo to get upset

my "opinion"

more like someone didn't want to face that another car using a engine only cost 1/3 to built with tons better off boost pull better result with the same turbo setup hence get upset :lol:

Edited by Maxx

Good call on the yellow 33 there Chops, was a bit of a sleeper i thought, would be happy with those results out of mine :P

Yeh thanks Ash for your hospitality afterwards, would have come to Andrews but mate racing yesterday had to sort some Kart issues out, Next time for sure.

Good to see so many Skylines on saturday and catch up with a few people

Had to leave early due to other commitments, thanks to everyone who organized it and big thanks to Boostworx for the day and for all the stuff done on my car

Here's my chart, nice torque for a little 167,000km old RB20 :P

Need a bigger turbo!

post-493-1130112248.jpg

Thanks heaps to Will and Boostworx for the day, and anyone else who helped :P

I would also like to thank the sympathetic comments that people made when they saw the key marks on my poor car.

That shit was f**ked up, i just don't know how these low-lives can act like that, just gets me angry thinking about it again.
Here's my sheet from the Crown.

Thanks for letting me join in boys, much appreciated.

Sean

Mate i would have been bloody disappointed if you HADN'T put it on the dyno, you can't tease us with 4.5L of donk and turbo as big as your head and not run it, and from the back seat the power delivery felt impressively smooth it just kept pulling. :D
What turbo does he run?

What boost?

ECU?

Injectors?

Cams?

I second this Sky30, keen to know the specs above especially the specs of the 35/40 u r running! Looked so tough watching the footage back on TV!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...