Jump to content
SAU Community

Recommended Posts

  • Replies 294
  • Created
  • Last Reply

Top Posters In This Topic

i so regret having missed out on this dyno day.

had a family gathering i had to go to. judging by the photos and everybody's comments in this thread, i shoulda pulled a sickie on the family gathering and gone along to the dyno day to be with my *preferred* family!

nice work will and the boys at boostworx! nice photos too ;)

Come on you R33 Girls... Post your dyno sheets. :)

Yeah! I want to see what torque figures you guys where making out of the RB25's for comparison with my RB20

I'll post mine when i have it on me and a scanner is near by......besides i only got 1 run cos it was leaning out over 5,500, God Damn. I think everyone was having some form of issues on the day!!!!!!

Yeah, allot of people where down on power from what I saw. I think, typically, Boostworx dyno is down a bit compared to others. The dyno room doesn't get good airflow, so the air your car is sucking in isn't the most productive for power, especially on a dyno day where you get lots of cars in and out

Yeah, allot of people where down on power from what I saw. I think, typically, Boostworx dyno is down a bit compared to others. The dyno room doesn't get good airflow, so the air your car is sucking in isn't the most productive for power, especially on a dyno day where you get lots of cars in and out

Yeah i would agree chris, it was pretty muggy in the workshop compared to outside, my car was also slightly down on power to what it usually runs.

Yeah i would agree chris, it was pretty muggy in the workshop compared to outside, my car was also slightly down on power  to what it usually runs.

Even though the runs where performed in shootout mode, that cannot factor in the lack of oxygen in the air, its only a air temp correction, so I wasn't surprised that most where down a bit. Its all relative though, as we all ran on the same day in the same conditions, on the same dyno etc

Nice run of yours, bit of a hard act for me to follow straight up afterwards with the ol RB20 :rolleyes:

Yeah! I want to see what torque figures you guys where making out of the RB25's for comparison with my RB20

Keep in mind the torque figures displayed on a chassis dyno are only comparable if the gear they were run in and the diff ratio are identical.

I'm not 100% sure of the gear and diff ratio differences (if any) between R33 and R32s.

I had runs done in 2nd and 3rd gear, and obviously the ones in 2nd gear showed higher torque figures, due to greater torque multiplication.

Keep in mind the torque figures displayed on a chassis dyno are only comparable if the gear they were run in and the diff ratio are identical.

I'm not 100% sure of the gear and diff ratio differences (if any) between R33 and R32s.

I had runs done in 2nd and 3rd gear, and obviously the ones in 2nd gear showed higher torque figures, due to greater torque multiplication.

I think comparing R32/33 runs should be pretty similar, I think there are very minor differances between the two in 4th gear

Keep in mind the torque figures displayed on a chassis dyno are only comparable if the gear they were run in and the diff ratio are identical.

I'm not 100% sure of the gear and diff ratio differences (if any) between R33 and R32s.

I had runs done in 2nd and 3rd gear, and obviously the ones in 2nd gear showed higher torque figures, due to greater torque multiplication.

Chops, can you post your dyno run? I'll do the calcs to compensate for your diff ratio, just so I can compare how the N/A 5.7ltr looks against an rb30det.

Edited by Cubes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...