Jump to content
SAU Community

Recommended Posts

I have finished the engineering on the R33GTR and R33GTS4 suspension kits. There are quite a few differences in settings and parts selection, particularly shock absorber valving which needed a large number of changes. I have also included the often requested Dust Cover and Bump Stop kit, you only need it if you have to replace your broken, lost or worn out standard parts.

Skyline_Kit.jpg

Bilstein_Logo.jpg

The supply of R33GTR Bilsteins is also quite limited, so don't hesitate too long with taking up the Group Buy as they will all be gone. The next shipment is not due for at least 5 months.

R33GTR_Whiteline_Package.jpg

Please PM me with your order and post up any questions you may have on here. As it may answer other peoples questions at the same time. Fitting and alignment can be done at the following locations

Heasmans Sydenham NSW

East Coat Suspension Kirrawee NSW

St George Steering Punchbowl NSW

Centeline Thomastown Vic

Traction Tyre & Suspension Rowville Vic

Discount Tyres Service Belconnen Act

Motsons Qld

More fitting stations will be posted as they come to hand. Please note that the above fitting locations are workshops that I have used in the past, so I know that they can do the necessary work to the right standard and have the right equipment. No special prices or discounts apply, you can negotiate fitting cost and times directly. A full kit will take at least a whole day as the bushes in particular can be time consuming to fit.

:) cheers :D

PS; Shocks and springs are currently in stock, bushes and stabiliser bars are made to order. So delivery is ~10 days from time of order, all items are shipped via Toll Priority using their Off Peak service. Consignment note numbers will be provided at the time of shipping, so your order can be tracked via Toll.

Payment should be made in full to the bank account details at the bottom of the price list, the receipt number for internet banking is acceptable or a copy of the deposit slip for over the counter banking. Send them to me via PM.

Edited by Sydneykid
  • Replies 105
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

For the guys that are ordering the Bump Stop and Dust cover kit. You will have to trim the bump stops to suite the correct height that you are going to have your car set at. The dust cover clips ove the end of the bump stop stop so you have to trim the other end with a knife, be careful it is easy to slip and cut yourself.

This is a picture of what the bump stop and dust cover assembled would look like at higher than standard height;

Bump_Stop_Dust_Cover_Small.jpg

This is how much much to trim off the bump stop, shown next to a standard Skyline bump stop. The orange line is for standard height, the red line is for ~350 mm centre of wheel to guard and the yellow line is for ~330 mm centre of wheel to guard.

Bump_Stop_Comparison_With_Heights_Small.jpg

Note that standard height is 2 circlip grooves up from the standard circlip groove, ~350 mm is the standard circlip groove and 330 mm is 2/3 circlip grooves down from the standard groove. You can pick the standard groove as it has a yellow stripe accros it. Plus the circlip should be in that groove when you get the shocks.

If you are using the standard bump stops they also have to be trimmed if you are going lower than standard height. Not that you have to trim the thick part of the standard bump stop, not just cut off the little lump on the bottom. You will need a hack saw as the rubber is very tough. The red line (no trimming) is for standard height, the yellow line is for ~350 mm centre of wheel to guard and the orange line is for ~330 mm centre of wheel to guard.

Bump_Stop_Standard_Triming_Small.jpg

Hope that was of some help, if you have any questions please post them up here as it may answer other peoples queries as well

:D cheers ;)

Edited by Sydneykid
  • 2 weeks later...
  • 2 weeks later...

Hi guys, there are only 2 sets of R33GTR Bilsteins left. As soon as they are sold Jamex will be closing the Group Buy on the R33GTR kit. We have no word from Germany as to when they will be making the next production run of R33GTR Bilsteins.

So if you are thinking about joining in, don't wait too long.

:) Cheers :)

Edited by Sydneykid

Apexi suspension still making me cry :) (hint)

So looking forward to real suspension and not losing fillings on the "fine" melbourne roads.

:)cheers:)

Apexi suspension still making me cry :) (hint)

So looking forward to real suspension and not losing fillings on the "fine" melbourne roads.

:)cheers:)

Don't strees Geoff, your Bislteins are safe and warm in my office. Just waiting on front springs, I'll give you an ETA later today.

;) cheers :)

  • 2 weeks later...

Update: I was advised of shipment Tuesday and Delivery occured Wednesday. No sweat on the delay as I already knew some items needed to be manufactured. A couple of items still to come but I now have the important items to smooth out my ride.

How am I feeling? Ecstatic!! What a great shock/spring setup. Massive increase in front grip on bumpy corners.

Thanks SK.

  • 3 weeks later...

Quick update on stock, there are 4 sets of Bilsteins left for this model. When they are gone the Group Buy will have to finish. So don't hesitate too long or you will miss out.

:) cheers :)

  • 4 weeks later...
  • 2 months later...
  • 1 month later...

Hey SK,

You still have any of these? I am just after the stabilizer bars and subframe alignment atm (I have nice shocks / springs atm).

Thanks.

Christian

  • 3 months later...
Hey SK, can I order some sway bars from you?

I don't have any, but I can organise some from Jamex on the Group Buy for you.

PM sent.

:D cheers :(

  • 1 month later...

There area limited number of rear Bilsteins in stock, so move quickly or you will miss out. No production planned at Bilstein Germany until after Xmas.

:dry: cheers :D

  • 2 weeks later...
There area limited number of rear Bilsteins in stock, so move quickly or you will miss out. No production planned at Bilstein Germany until after Xmas.

:nuke: cheers :D

SK,

What coil overs could you recommend with this package. I've been told PSS9 are a good option. Have you done a track setup yet?

SK,

What coil overs could you recommend with this package. I've been told PSS9 are a good option. Have you done a track setup yet?

PSS9's are OK for lots of track use and a little road use, in my opinion more suited to road use than 90% of the Jap coil over kits.

I have done a few height adjustable circuit kits and a couple of drag kits for guys, using revalved (non adjustable) Bilsteins. The guys were much happier knowing the Bilsteins had a wide window and didn't need them to be experts in choosing shock settings. PM me for details.

:no: Cheers :D

  • 3 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...