Jump to content
SAU Community

Recommended Posts

has anyone seen the gold r33 on the front cover of the latest fast 4's?

the mag comes with a dvd that goes through the build up and all of the mods.

The car pulls 301 rwkw on the dvd. I didnt know that was possible for a internally standard rb25det? Also its producing that power at 20psi+. This says alot about the strength and tuning of the rb25.

I dont want to start crap but wont reliabilty become a big issue constantly producing those numbers????

Link to comment
https://www.sau.com.au/forums/topic/87886-bathurst-inspired-skyline/
Share on other sites

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Guest DIRTgarage
has anyone seen the gold r33 on the front cover of the latest fast 4's?

the mag comes with a dvd that goes through the build up and all of the mods.

The car pulls 301 rwkw on the dvd. I didnt know that was possible for a internally standard rb25det? Also its producing that power at 20psi+. This says alot about the strength and tuning of the rb25.

I dont want to start crap but wont reliabilty become a big issue constantly producing those numbers????

Id just like to know what area of Bathurst inspired him......Bathurst Maccas on a Saturday night perhaps??

bathurst???

last thing on my mind when im modifying my car

reason im asking is i thought standard internal rb25 were only good for bit over 250rwkw???

oh yeah on the dvd he says last tune he made 280rwkw but on this dyno he makes 301rwkw. wtf???

wish my car could jump 20 kw when i put it on another dyno

Edited by reflex
Its Bathurst inspired because it is a winnar!  "You're all a pack of assholes".  Classic.

Hahahaha. :lol:

Well put. The only trouble is I was one of them. :)

How little I knew then of Nissan's beast. ;)

Winners = Yes

El Bee

rofl laurie are you an ex-commonwhore man are you? at least you have come over to the dark side.

Great speach from Jimmy that one

You've got me there Duncan.

Went from a VL (with Nissan 3L), to an Aussie R31 (same engine), to the R33.

There is a natural progression there (in my eyes anyway).

Jim's remark was correct but I think that it was Dick's fans who were most peeved by the situation. Stopped a Ford (Sierra turbo) from winning that year didn't it ?

Funny how the Sierra's were cheered because they had a Ford badge, even though you weren't likely to be able to buy one anywhere.

Enjoy!

El Bee

LMAO thats my car folks and its not bathurst inspired lol wouldnt it be a r32 gtr?? fast fours did alot of dumb shit like saying my adj cam gears were 264 degree for one wich is just stupid..i didnt get a chance to dble check all the bs

and for the question in the 1st post is it possible well didnt my dyno proove it??

ya spend $$$ ya get good results yoshi /bd4s / croydon built the car never misses a beat run 1.5 bar daily..with cam gears and more boost and cooler day its easy to make 20kw...

Edited by thizzle
has anyone seen the gold r33 on the front cover of the latest fast 4's?

the mag comes with a dvd that goes through the build up and all of the mods.

The car pulls 301 rwkw on the dvd. I didnt know that was possible for a internally standard rb25det? Also its producing that power at 20psi+. This says alot about the strength and tuning of the rb25.

I dont want to start crap but wont reliabilty become a big issue constantly producing those numbers????

i have seen 340rwkw on an internally standard rb25, but the owner understood that running with that power the car would not last long ;)

but yes it is possible, just not for too long.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...