Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

I bought a R32 because they are less common than the R33s, and provide good bang for your buck. I love the shape, but now that we sold it, i don't know if i'd buy another one, unless it was a 32 GTR. Im actually kind of interested in a R33, as they have a better base for big HP, and are generally in cleaner condition due to age...

Link to comment
https://www.sau.com.au/forums/topic/8813-r32-vs-r33/#findComment-129881
Share on other sites

If we are talking GTR's then the 32 is better, less weight and a real race car.

If we are talking GTS-t's then the 33, better looks, engine and newer.

All skyline owners have a good thing, and I like all the cars, but some are better than others.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/8813-r32-vs-r33/#findComment-129892
Share on other sites

looks are personal prefference.

myself, 32 looks a shitload better than the 33's, alot more aggressive in its styling.. 33 was when rounded cars were coming into fashion. ergh.

but both are awesome, 33 is obviously newer, larger engine capacity.. i had to go for the 32 even though it was more expensive, (mods+condition) because

A> looks

B> you dont see any on the roads, you'd be lucky to have more than 20 in perth. there's more R's than T's.

Shaun

Link to comment
https://www.sau.com.au/forums/topic/8813-r32-vs-r33/#findComment-129908
Share on other sites

The RB20DET starts to have trouble with lag as soon as you want 200+rwkw.

RB25DET is a much better base for power.

BUT.. I do like the R32 Interior a little better as personally I don't like the dash in the R33's or R34's. They seem a little plain, especially around the glove compartment.

If you don't want to run any quicker than a high 13 or around 190rwkw then a R32 is quick.

Exhaust, FMIC, Boost & a bit of timing she will be quicker than a R8 255LS1 Maloo Manual Ute. Well mine is I found out the other night.

When I say quicker I don't mean just beat him i mean pulling away through every speed and rev range.

RB25DET Turbo and boost to 16psi with a ECU remap will see around MAYBE 190rwkw most probably 180rwkw, honestly i don't know but its some where around there.

180rwkw is required in a R32 to out accelerate a 300kw GTS on a rolling run.

Which for the average joe is plenty.

Link to comment
https://www.sau.com.au/forums/topic/8813-r32-vs-r33/#findComment-130046
Share on other sites

like most ppl who opted for a 32 i do so cause i dont like the R33s awkward shape in stock form... i mean the high back end and low thin front. lines dont flow and its round and bulbous which is why they styled the R34 more on the R32... line flow right thru to the rear and is squarer not rounded.

200rwkw is probably more than i would go to at this point, i would be happy with about 170 or 180... ppl who say they buy the 33s over 32s cause they are newer really crack me.... the whole newer is better thing... even ppl who buy 93 model R33s say this lol on that sort of comment one would think that a 1969 mustang is worse than a 1980s mustang... comes down to preference, age is just something for those that are paranoid and wear nike cause its in fashion.

IMO

Link to comment
https://www.sau.com.au/forums/topic/8813-r32-vs-r33/#findComment-130532
Share on other sites

Originally posted by tlai909

0.9 bar a lot for a stock turbo. I run 0.8 and I should turn it down on hot days as soon as I CBF using the EBC.

T.

if u have a good fmic your turbo will actually be running at 0.9 bar when u set the bleed, ebc cause with the stock cooler, especially on a hot day u get a huge pressure drop from turbo to intake so the tubo is actually running more then 0.9 bar at times to get 0.9 bar at intake.

and just to prove it i got 165kw@wheels at 0.5 bar when previously i was getting 155kw@wheels at 0.8 with stock cooler!

Link to comment
https://www.sau.com.au/forums/topic/8813-r32-vs-r33/#findComment-130541
Share on other sites

ahh ok so obviously the hotter the air the more space it occupies.

Hence pressure drop.

So when it is cooled from the FMIC the temperature change is greater compared to a cooler day.

So the air after the FMIC on a hotter day will be occupying a smaller area compared to that same charge on a cooler day.

Did i kind of make sense.

That is why with a bleeder you get less boost on warmer days compared to more boost when the air is cold and chilled.

Cool air can only be cooled so much I guess where as with the hotter air the heat exchange is better hence more effiecient.

I think thats what i was trying to say .. :D

Inasnt.. For some reason I've seen so many R33's make much more power once fitted with a FMIC and running the same boost.

With the R32's for some reason they stay around the same power maybe pick up a rwkw or two but nothing like 10 or 15rwkw like the R33's on the same boost.

Could this possibly due to the ecu pulling timing out with the R33's in turn reducing power where as the R32's maybe the ecu isn't as aggressive or the CR causes less pinging?!?!

Any 1?

Link to comment
https://www.sau.com.au/forums/topic/8813-r32-vs-r33/#findComment-130553
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...