Jump to content
SAU Community

Recommended Posts

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

Twin PT52 Precision Turbo Engine Turbos will provide the Boost. Each Turbo is capable of making 600HP or 1000CFM of Air. Together the combination is good for at least 1200HP and/or 2000CFM of Air. The Turbos were selected to have a small nozzle diameter as well as a .85 AR Ratio. To allow these Turbos to spool up quickly in order to reduce the sensation of Turbo Lag.

:drooling:

mike if you read this before you go.

there is an arcade on murray street if you are walking down from pier street carpark

go past baskin and robbins

and then there is an asian grocery store

go past that and then next to it is an arcade. there is a shop in there called Aspec

go talk to franky and he will get you all the globes etc you need, he knows what goes in etc

no worries Mr Riceroni

peace

nah - soarer turbos use the same engines as the chasers. though with less beefy cams I think.

the old 1jz. little brother to the 2jz.

later model soarers came in a 2.5L tt, 3L6 n/a and the 4L v8s. now theyre purely v8s I think. but I have seen a twin turboed version of the new one in a video of some tuning shop in japland. forget which one....

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Yes, I had ordered the spherical bushings at the same time as the rest. I have high hopes for the anti squat reduction kit. 
    • Make sure you use the spherical bushes** on the lower arms, ifyou do that. ** at least, if not the whole replacement lower arm.
    • The tap for coolant flow control will be stuck open. It's not just the air door motor that dies.
    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
×
×
  • Create New...