Jump to content
SAU Community

Recommended Posts

Hi guys, just made 340AWKW at CRD today with our street exhaust.

I have yet to see the Dyno graph but jim said the car made more low end about the same mid range and more top end with the JUN plenum and QF45 throttle body.

tomorrow i'm going over to but the 4"exhaust on and then we will do another power run and just check it over to make sure everything is ok!

Last time the race exhaust made another 30AWKW on top, with out any tuning.

I'll post up again later to tell you how it all goes.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/88735-340kw-at-the-wheels-on-gt-ss-turbos/
Share on other sites

Hi,

we ran the car up again with the 4" exhaust today.

we made another 20AWKW =360AWKW

I beleive the problem is now that the airbox we had made(which is designed for max power with the headlight out).Could now be starving the car of air with the head light in.

The car is pretty mad to drive!

The next mods to the car with be a new intercooler and a fibreglass funnel to the airbox from where the head light is.

A BIG thanks goes out to Jim and the gang at Croydon Racing Developments for the great job tuning the car .

Another reason for not making more power with the big exhaust is that the turbo's can't keep the pressure up with the new plenum.

I would like to try a set of GT-RS turbo's on the car.

I think that the good old GT-SS turbo's are pretty much out of puff!!

we'll see what has to be done to make some more power down low.

Cheers

Sorry i forgot to add that was on 22psi down to 21psi andf running BP 98.

shit so thats 612hp at all fours or am i mis-calculating :)

i dont doubt the figure i just wondered if i worked it out right and damn thats impressive numbers for little low mounts :D

good luck

Brad

Sorry that's not right.

22>21 made 340AWKWs quite exhaust

22>21 made 355awkws big exhaust.

27 psi made 360big exhaust

as you can see the turbos are out of puff by then anyway.

I'm not sure how much that is at the wheels in HP.

Again thanks to the Guys at CRD!

Congratulations :D

Looks like Jim is definitely on top of these GT-SS turbos :O

What are you plans for the car? I wouldn't put a pair of GT-RS on a stock capacity RB26 if I were you. The car won't be anywhere NEAR as fun to drive.

Full mod list?

i belive this car runs a JUN 2.7lt strocker and JUN plenum i would like to see what GTRS can do

I'm not quite sure what an extra 100cc would do in spooling up the GT-RS, but I'm interested to see if 600hp is willing to take the chance and show us :D

All the UK tuners (who have been testing with the GT-RS's for the last 3 years) readily agree that you need at LEAST a 2.8 stroker or preferably a 3.0 OS Giken kit to get the GT-RS's to spool early enough for a road car.

From what I've noticed building a 3ltr then comparing it to the 2.5 and 2ltr, it appears for every 500cc increase you improve spool by ~600rpm.

Its the torque that makes the biggest difference.

Edited by Cubes

I don't really understand the following that these GTRS's have on an RB26 , I cant see the point of extra capacity to excite turbo's that are so so to start with . 2530's would have far better response than GT-RS's (GT2871 52 trim's) so what gives ? If someone went to the same lengths with these turbo's (2530) as WilliamsF1 did with GT-SS's surely the torque at the wheels would be adequate and very progressive . I think Gary mentioned some good times with them but cant I remember the numbers .

Cheers A .

Hows it going 600hp

Do you think you have found the limit of the GT-SS

at the 360awkw? (great effort by the way)

I hate it when people talk what boost by when (cos it really has no relationship to power and torque) But i would be interested to see the torque curve you achieved as to me it's the most important thing as it's what drop you back in the seat and keeps you there lol.

pete

ps great to see you posting results again cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...