Jump to content
SAU Community

Recommended Posts

"3 your fuel pump is not dying? it happened to me and it confuses the ecu showing a/f is good but it's actually constantly retarding timing and i only reached no more than 150rwkw till i replaced the fuel pump. "

This strikes me as possible.

i assume i attach a t piece with a pressure guage to test the fuel pump. I'm getting good economy and it doesnt miss at all when i floor it.

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

What plugs are you running?

The top end looks as if its flattening out a little, that could be due to the plugs, it could also be due to a restriction in the exhaust or as some one else mentioned wheel spin on the dyno.

If power had not have flattened out it would be up around 148rwkw.

I do agree though, that power figure is embarrasing. :)

150rwkw doesn't feel fast anyway, its only once you are up around 200rwkw it starts feeling fast.

My 176rwkw felt slow even though it was making 100 of those rwkw by ~2000rpm. This was run in 4th but only taken to ~6000rpm due to it not making any more power after 5000rpm. Torque dip in the middle is wheel spin.

Edited by Cubes
wow great result there. does the full exhaust include dump pipe?

Yeah its got a dumper, but i believe the muffler is very restrictive (its not even a straight thru). I'm running coppers that mercury gapped down to help my ailing coilpacks, which are on the way out :)

You guys believe dyno figures too much.

Example... my stock R33 GTS-T with a cat back exhaust and aftermarket fuel pump was dyno'd within a week at two places.

Unique Auto Sports = 156.1rwkw

Castle Hill Exhausts = 140.2rwkw

Nothing on the car had changed and same batch of fuel.

Goto agree with Tommo, main reason why you should always get your car dyno'd at the same place, providing they don't change their setup, you atleast will have figures relavant to previous ones that are accurate..

although - goto say <140 sounds quite low..

Guys i seem to have miraculously fixed this problem.

By the push in the back im guessing ive just gained an extra 30-40kw!

It was a leak on one of the smaller hoses going to the inlet manifold causing the disturbing whistle at high rpm, and also must have been sapping the power.

i will still get it dynoed, but the car is running smoooth as, and fast!

I'll keep youse up to date.

Great stuff mate, very good to hear it was a simple fix.

I'm suprised the guys dyno'ing it didn't notice :P

That said though, I didn't even think that was a incorrect figure, rather a slightly out dyno... but you've proved me wrong :D

Edited by TommO

Guys Guys Guys

I have read so much in the forum about Power figures I think it is quite strange that noone has done there homework on this

A stock GTS-t R33 makes 180-185kw at the flywheel which equates to a LOT less at the wheels.

A stock car will make approxx 120-130 HP at the wheels which is 88-95kw at the wheels. This I know because i have seen my car which was completly stock when i bought it and in fantasic condition and i have gone down the road of modifacation.

My car has now produced 210 HP at the wheels which equates to 154kw which is starting to become a nice street car I have a Hiflow Turbo coming and a SAFC tune on the way. I completly fail to see how the figures that you guys are talking 200rwkw with a stock dump pipe I cant help but feel that this is a crock of shit 200kw equates to 271hp

Which u JUST CANT GET with a stock dump PIPE I had to go for a aftermarket dump pipe when i hit 185-190 hp at the wheels. I think someone is telling porky's

I will probably get flamed for this.

Guys if you think i'm talking crap Google the standard power figures and make your conclusion.

http://www.digitaldutch.com/unitconverter/

Drivetrain loss is roughly 30% I thought. Ie stock R33 gts-t with 185kw at the fly will be roughly 130rwkw. R32 gts-t with 160 will be 110. Works for me. I think everyone in this thread was talking kilowatts weren't they?

A stock GTS-t R33 makes 180-185kw at the flywheel which equates to a LOT less at the wheels.

A stock car will make approxx 120-130 HP at the wheels which is 88-95kw at the wheels. This I know because i have seen my car which was completly stock when i bought it and in fantasic condition and i have gone down the road of modifacation.

So what your saying is a stock R33 GTST looses around 90kw going to the back wheels?

Once again, dyno's differ, especially different brands.

My R32 GTST making 160fwkw dead stock made 110rwkw.

Exhaust, fmic and boost it jumped to 164rwkw. I had the car on 3 different but same brand dyno's. One varied -10rwkw, it was on a 35degree day though.

85-90rwkw for 185fwkw is unrealistic. My old N/A VLmade 80rwkw on an old school dyno that had a big clock and needle looking thing that gave the power readout. :)

My car has now produced 210 HP at the wheels which equates to 154kw which is starting to become a nice street car I have a Hiflow Turbo coming and a SAFC tune on the way. I completly fail to see how the figures that you guys are talking 200rwkw with a stock dump pipe I cant help but feel that this is a crock of shit 200kw equates to 271hp

Which u JUST CANT GET with a stock dump PIPE I had to go for a aftermarket dump pipe when i hit 185-190 hp at the wheels. I think someone is telling porky's

http://www.digitaldutch.com/unitconverter/

whoever sold you the dump pipe is laughing right now... did you dyno the car with the exhaust dropped to make sure there was a restriction?

more importantly do you already have some kind of fuel management because the standard ecus tendency to richen the top end mixtures when boosted will rob you of alot more power than the stock dump pipe...

In fact with your 'highflow that is coming' you may want a ecu that lets you adjust the ignition timing not to mention that you will probably want to use a/m injectors too... unless your going to run a highflow with an SAFC and standard injectors but your not afraid of frying the rings are you!

Finally just cos your car was in great condition on the outside doesn't mean that the motor has perfect compression ...remember your talking about a 10yr old turbo car here... and don't even start me on believing the odometer reading!

so yeah the stock dump pipe isn't a huge restriction and can happily stay as long as the stock turbo, other things are more important imho

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...